Only for commercial customers.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Product dimensions: 198 x 130 x 45 mm (LxWxD)
Application: For screw fastening on live parts up to 1,000 V AC.
Kind to hands and muscles
Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs
Safe operation up to 1,000 V AC
slimBits allow access to low-lying screws thanks to inserted insulation
Versatile use
Electricians are often faced with different screw profiles when working on live parts during their daily work. With the SoftFinish® screwdriver handle, including interchangeable slimBits, multiple applications can be covered without having to carry a separate screwdriver for each profile. The ergonomically shaped screwdriver handle with roll-off protection fits perfectly in the hand, protecting joints and tendons as users work. Thanks to Wiha slimTechnology, the contained slimBit blades are up to 33% slimmer and can thus * easily reach deep-set screw and spring elements. The insulated screwdriver handle and * slimBits undergo routine individual piece testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Content:
- 1x Screwdriver with bit holder SoftFinish® electric slimVario for slimBits (41927)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
Increases your efficiency: Clean work thanks to cable cutting without crushing.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 215 x 55 x 28 mm (LxWxD)
Application: Cable cutter for cutting of copper and aluminium cables without crushing, also suitable for stripping.
Application: Not for steel cable, wires and copper conductors with hard coatings.
Application: For work in the area of live parts up to 1,000 V AC.
Simplifies your work: Unrestricted access to hard-to-reach work areas thanks to extremely slim handle shape.
Saves money: Two tools in one for cutting to length and skinning.
Increases your efficiency: Damage-free stripping thanks to automatic adjustment to cable diameter.
Product dimensions: 240 x 110 x 30 mm (LxWxD)
Application: For precise and safe stripping of cables up to 6 mm².
For cutting Cu and Al leads with a diameter of up to 2 mm.
Skinning: 0.2 - 6 mm² Cutting to length: max. 2 mm²
Adjustable length stop from 5 - 12 mm
Compact and space-saving
Cutting solid / stranded: max 3 mm² / max 6 mm²
Electricians need to strip cables often when installing electrical systems. Their equipment would be incomplete without a stripping tool. Wiha's automatic stripping pliers allow stripping of all standard leads from 0.2 to 6 mm². The lightweight pliers ensure quick and precise skinning thanks to an integrated scanning system that adjusts automatically to the respective lead cross section, effectively preventing damage to the interior lead. In addition, the leads can be custom stripped with the adjustable length arrester from 5 - 12 mm. If needed, the length arrester can also be entirely removed from the tool. In addition to skinning, the stripping pliers can be used as diagonal cutters for cutting cables up to a diameter of 2 mm to length. The blades of the stripping tool are made of high-quality sturdy cutlery steel and can be replaced, if required. Space-saving and secure locking is ensured by the arrest option on the tool.
Increases your efficiency: Your daily companion - always have the relevant profiles with you.
Saves space: Compact and light tool, fits into any pants pockets.
Protects your health: No risk of injury, *all bits stowed safely inside the handle.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 111 x 35 x 35 mm (LxWxD)
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Simply pull - magnetic closure
Fits in every trouser pocket
slimBits allow access to low-lying screws thanks to inserted insulation
Safe operation up to 1,000 V AC
Expandable and compatible with EVF products
Multitools are truly multi-faceted, if only they were not so large and heavy. The compact and light PocketMax® from Wiha conveniently fits into any shirt or pants pocket and is the ideal companion for every electrician. Securely stowed away in the handle, the bit depot includes four slimBits. Thanks to a magnetic shut function, the bit depot can very easily be opened to remove the slimBits. Searching for the right bit is therefore a thing of the past. During closing, the bit depot smoothly and easily glides back into the shaft and practically closes by itself thanks to the magnet. The twistable cap brings a further advantage, ensuring convenient handling. The PocketMax® electric also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified to the international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clips thanks to protective insulation fully integrated into bits in the front section.
Tested according to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
Wiha
Increases your efficiency: Fastening without interruption thanks to a finely toothed ratchet wrench.
Increases your flexibility: Adjustable right or left rotation through switching lever.
Product dimensions: 135 x 25 x 22 mm (LxWxD)
Application: For installation and mounting work.
Non-slip ergonomic handle
Protects the fingers thanks to its cropped design
Perfect for confined spaces thanks to its fine toothing
Secure hold and easy replacement of the nuts thanks to quick release detent retaining ball at the push of a button
Tightening and loosening strongly tightened hex screws and nuts requires an enormous amount of force. With the reversible ratchet from Wiha users can easily open and close any screw connection. Thanks to the non-slip two-component handle work is particularly ergonomic and comfortable. The compact ratchet head additionally allows working in confined spaces. The cropped design ensures an elevated holding position, which supports a powerful grip and protects the fingers from injury. The finely serrated ratchet with 72 teeth also has a short return angle of 5° that also enables work in the tightest of spaces. Using a switching lever, right or left rotation can be easily adjusted. The robust reversible ratchet allows safe working and can withstand loads far beyond the DIN requirements up to a torque of 93 Nm. The push button on the ratchet head releases the detent retaining ball and serves the easy and quick replacement of box nuts or adapters. Made of high quality chrome vanadium steel, the reversible ratchet is distinguished by its longevity and robustness.
Based on DIN 3122/ISO 331.
Wiha
Product dimensions: 280 x 110 x 50 mm (LxWxD)
Application: Suitable for fastening and loosening TORX® screws.
Quick removal: pushing, tilting, removal
Easy to find with UV light
Reliable and neat storage of L-key sets often means cumbersome handling and difficult removal from the existing solutions. The ProStar holder from Wiha has changed all that. Simply pushing the holder open grants free access to the L-keys that can be quickly removed through a tilting mechanism. A clamping in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. The colored L-keys are also quick and easy to find and, thanks to the luminous paint, even in the dark using UV light. This means it takes less time to find lost L-keys and minimizes the risk of leaving tools inside machines when working on equipment. The set contains nine TORX® L-keys in standard sizes. The L-key set can be hung up directly at the workplace using the suspension bracket on the holder.
Content:
- 1x L-key TORX® luminescent colour T8 x 101 mm (46659)
- 1x L-key TORX® luminescent colour T9 x 111 mm (46660)
- 1x L-key TORX® luminescent colour T10 x 122 mm (46661)
- 1x L-key TORX® luminescent colour T15 x 136 mm (46662)
- 1x L-key TORX® luminescent colour T20 x 149 mm (46663)
- 1x L-key TORX® luminescent colour T25 x 164 mm (46664)
- 1x L-key TORX® luminescent colour T27 x 176 mm (46665)
- 1x L-key TORX® luminescent colour T30 x 191 mm (46666)
- 1x L-key TORX® luminescent colour T40 x 210 mm (46667)
