Only for commercial customers.
- half-round, long, tapered jaws
- distortion-tolerant, elastic precision tips
- s uitable for finer gripping and cutting work, also on easy and semi-difficult to reach areas
- with cutting edges for soft, medium-hard and hard wire
- cutting edges additionally induction- hardened, cutting edge hardness approx. 61 HRC
- With integrated forged axle for heavy duty
- with precision cutting edges for soft, ha rd and piano wire
- cuts thick wires with less effort than other diagonal cutters of the same length
- centric precision cutting edges
- high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio
- cutting edges a dditionally induction-hardened, cutting edge hardness approx. 64 HRC
- Multifunctional - cutting and stripping with one pair of pliers
- for time-saving stri pping of all round sheathed and damp-proof installation cables (e.g. NYM cable)
- simplified access especially into deep mounted junction boxes thanks to slim head design and optimally angled c able sheath cutter
- strip cables easily and without damage thanks to circular cutting edge wi th depth limiter
- suitable for universal use: precision wire stripping holes for conductors f rom 1.5 and 2.5 mm²
- with side cutters for cutting and trimming conductors, wires, small scre ws and nails
- all cutting edges additionally induction-hardened to approx. 61 HRC for high we ar resistance
- 30% lighter than comparable pliers
- Improved transmission for increased service life
- Smoothly ground gripping surfaces f or damage-free gripping
- Durable, load-optimised design with backlash-free box joint
- High, slim sleeves for fine and comfortable gripping between thumb and index finger
- low-fric tion double spring for gentle and even opening
- Mirror-polishing instead of chrome-plating to avoid interference in the circuit with flaking chrome parts
- edges carefully deburred
Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 375 x 125 x 40 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.
Yellow hammer face (medium-hard) for tool manufacture / mechanical engineering, automobile sector, or sheet metal and assembly work
Hammering without recoil minimizes stress on joints, tendons, and muscles
Optimum impact effect without recoil minimizes effort and reduces the risk of injury
Hickory-wood handle and hammer faces available separately as spare parts
Especially on delicate surfaces, choosing the right hammer is crucial to avoid damage. The recoilless, soft-faced hammer with hickory-wood handle makes it possible for the user to deliver measured positioning blows and protects delicate surfaces and edges due to its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. In addition, the approx. 25% greater mass of the hammer head ensures added power and easier work, optimum impact effect, and less effort needed as a result. The hammer also stands out thanks to its high-grade hickory-wood handle with a highly effective non-slip surface. The yellow, medium-hard hammer faces with a diameter of 50 mm are ideal for universal use in areas like tool making and mechanical engineering as well as sheet metal and assembly work. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.
GS tested.
Lowers your costs: Prevents damage caused by lost circlips in the work area.
Saves time: Safe and sturdy grip on circlips.
Product dimensions: 303 x 178 x 16 mm (LxWxD)
Application: For fitting / removing circlips externally to / from shafts or axles.
Supplementary information: with safety latching function MagicTips®
DIN ISO 5254.
Meets your requirements: Safe pressing in marked trapezoidal/semi-circular profiles.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 190 x 62 x 28 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Application: For crimping end sleeves acc. to DIN 46228 parts 1 + 4.
Standards: DIN ISO 5743.
Manufactured acc. to IEC 60900.
Lowers your costs: The correct torque protects you from warranty claims.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Product dimensions: 135 x 35 x 35 mm (LxWxD)
Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade.
Accuracy: ±10%
Handle: Multi-component handle optimally designed for the hand enables optimal power transmission.
Handle: Audible and perceptible click when the pre-set torque has been attained.
Handle: Mechanism insensitive to industrial lubricants.
Handle: Compatible with all blades of the 2859.
Are you looking for controlled screw tightening without damage to materials and follow-up work? No problem with the easyTorque torque screwdriver, which ensures process safety in its application. Thanks to a click signal when reaching the set torque value, the work piece remains undamaged and protects you from warranty claims. The multi-component handle, which is ergonomically designed for the hand, enables optimum power transmission while protecting your health. In addition, the torque screwdriver is also compatible with all blades from the 2859 series. With its mechanics that are not affected by industrial lubricants, the torque screwdriver is your perfect companion for comfortable work. Designed based on the standard EN ISO 6789, the torque tool offers a release accuracy of +/- 10%.
Bit holders or blades are not included in delivery.
Based on DIN EN ISO 6789.
Lowers your costs: The correct torque protects you from warranty claims.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Product dimensions: 135 x 35 x 35 mm (LxWxD)
Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade.
Accuracy: ±10%
Handle: Multi-component handle optimally designed for the hand enables optimal power transmission.
Handle: Audible and perceptible click when the pre-set torque has been attained.
Handle: Mechanism insensitive to industrial lubricants.
Handle: Compatible with all blades of the 2859.
Are you looking for controlled screw tightening without damage to materials and follow-up work? No problem with the easyTorque torque screwdriver, which ensures process safety in its application. Thanks to a click signal when reaching the set torque value, the work piece remains undamaged and protects you from warranty claims. The multi-component handle, which is ergonomically designed for the hand, enables optimum power transmission while protecting your health. In addition, the torque screwdriver is also compatible with all blades from the 2859 series. With its mechanics that are not affected by industrial lubricants, the torque screwdriver is your perfect companion for comfortable work. Designed based on the standard EN ISO 6789, the torque tool offers a release accuracy of +/- 10%.
Bit holders or blades are not included in delivery.
Based on DIN EN ISO 6789.