Benning ST 755+ BTEC set. Device tester for testing electrical devices/work equiBenning ST 755+ BTEC set. Device tester for testing electrical devices/work equipment in accordance with DIN EN 50678 (VDE 0701), DIN EN 50699 (VDE 0702), DGUV regulation 3 and medical electrical devices in accordance with DIN VDE 0751-1, DIN EN 62353, such as hospital/care beds. Display graphically. Limit display yes. Measurements: Insulation resistance measuring range 0.1 MOhm - 100 MOhm. Nominal test voltage 100 V. Nominal test voltage 250 V. Nominal test voltage 500 V. Nominal voltage 1000 V. Adjustable. Protective conductor resistance measuring range 0.05 ohm - 10 ohm. Test current 600 mA/10A. Replacement leakage current, yes. Differential current yes. Direct measurement, yes. Protective conductor current, yes. Touch current yes. Protective conductor/touch current 0.03 mA - 25 mA. Consumer current measurement, yes. Performance measurement, yes. Functional test V/A/W in the True RMS real effective value measurement method. Testing mobile PRCDs and type AC/A/F/B/B+. Connection for external measuring adapters, yes. Testing 3-phase consumers using optional measuring adapters. Additional measuring adapters optionally available. Checking extension cables, yes. Device leakage current, leakage current from applied part types B, BF and CF. Special features: Brilliant 7 inch color touch display (35% larger user interface) with innovative menu functions for simple and efficient initial testing/creation of new test items. Smart menu functions: Individually adaptable device templates (24 templates per test standard) for quick creation of test items using a single keystroke, Auto-ID function for automatic incrementing of the identification number (ID) when creating new test items, individually via ON/OFF Slider displayable device data for optimized handling and use by EUPs. Favorites menu for direct jump to frequently used submenus. Softkey keyboard (QWERTZ), graphic fields describe the predefined functions. Automatic test procedure, yes. Automatic and manual test sequence with good/bad display. Measured value memory, yes. Complete test object database including test history can be saved on SD card/USB stick. Interface version WLAN, Bluetooth, 4 x USB Type A, 1 x mini-USB, 1 x RJ 45, 1 x SD card slot. Printer port USB-A. Free updates. Battery-supported user interface, e.g. B. in the event of a power failure, transport from test location to test location, access to SD card possible. Active testing yes. Passive testing, yes. Alternative method yes. Differential current method yes. Direct method yes. Voltage measurement, yes. Dimensions length 405 x width 330 x depth 165 mm. Weight: 6kg. Test device in a robust protective case (IP67), self-compensating test lead, 4 mm measuring lead, test tip, alligator clip set, cold device lead, SD card, BTEC Smart 1 year - 100% voucher, barcode scanner, barcode labels 1000 pieces, test stickers 300 pieces, calibration certificate.

Properties

Manufacturer: Benning

Description: Device tester BTEC set

Type: BENNINGST760+BTECSET

Display: graphic

Limit display: yes

Insulation resistance measuring range: 0.1..100 Mohm

Protective conductor resistance measuring range: 0.05..10 Ohm

Protective conductor current: yes

Touch current: yes

Consumer current measurement: yes

Performance measurement: yes

Leakage current measurement DC: yes

Tripping time measurement of (P)RCDs: yes

Connection for external measuring adapter: yes

Testing extension cables: yes

Automatic test sequence: yes

Measured value memory: yes

Printer integrated: no

Active testing: yes

Passive test: yes

Alternative method: yes

Differential current method: yes

Direct method: yes

Voltage measurement: yes

Suitable for use by an instructed person: yes

Interface version: Wi-Fi

Printer port: USB-A

Test according to EN 50678: yes

Test according to EN 50699: yes

Test according to EN 62638: no

Test according to EN 62911: no

Testing according to IEC/EN 60974-4: yes

Testing according to IEC/EN 62353: yes

Entering test item information: yes

Testing according to VDE 0701: yes

Test according to VDE 0702: yes

Test according to VDE 0701/0702: no

Testing according to VDE 0751: yes

Testing according to VDE 540-4: yes.

No. 97 52 67 DT. KNIPEX 97 52 67 DT Four-Mandrel Crimping Pliers for DT contactsNo. 97 52 67 DT. KNIPEX 97 52 67 DT Four-Mandrel Crimping Pliers for DT contacts 230 mm

• Crimps all turned male and female contacts of the series DT, DTM and DTP (formerly DEUTSCH c onnectors)
• Comprehensive capacity: from 0.35 mm² to 3.0 mm² (AWG 22-12)
• Synchronous feed of the four mandrels ensures optimum crimping result with 4/8 indent
• Universal position ing aid for flexible adjustment to all contact lengths
• Repetitive, high crimping quality due to ratchet mechanism (unlockable)
• Position settings for the crimp depth can be clearly read on the pliers
• Ergonomic design for low-fatigue work: optimised opening width, comfortable m ulticomponent grips, low manual force required due to lever transmission
• Separately availabl e: precision-ground Go/NoGo gauges to check calibration

No. 05074820010. Series 7400 ESD Kraftform torque screwdrivers with a customisedNo. 05074820010. Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7450 ESD x 0.1-0.34 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074820010

No. 05074822010. Series 7400 ESD Kraftform torque screwdrivers with a customisedNo. 05074822010. Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7451 ESD x 0.3-1.0 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074822010

No. 05074824010. Series 7400 ESD Kraftform torque screwdrivers with a customisedNo. 05074824010. Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7452 ESD x 0.9-1.5 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074824010

No. 05074840010. Series 7400 ESD Kraftform torque screwdrivers with a customisedNo. 05074840010. Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7460 ESD x 0.3-1.2 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173).<,br>Please note: 1 Ncm = 0.01 Nm.05074840010

No. 05074842010. Series 7400 ESD Kraftform torque screwdrivers with a customisedNo. 05074842010. Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7461 ESD x 1.2-3.0 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173).<,br>Please note: 1 Ncm = 0.01 Nm.05074842010

No. 05074720010. Series 7400 Imperial Kraftform torque screwdrivers with a custoNo. 05074720010. Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7465 x 2.5-11.5 in. lbs.Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074720010

No. 05074722010. Series 7400 Imperial Kraftform torque screwdrivers with a custoNo. 05074722010. Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7466 x 11-29 in. lbs.Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074722010

No. 05074721010. Series 7400 Imperial Kraftform torque screwdrivers with a custoNo. 05074721010. Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, pistol handle, 7467 x 25-55 in. lbs.Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074721010

No. 05074790010. Series 7400 Kraftform torque screwdrivers with a customised facNo. 05074790010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7450 x 0.1-0.34 NmWera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074790010

No. 05074792010. Series 7400 Kraftform torque screwdrivers with a customised facNo. 05074792010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7451 x 0.3-1.0 NmWera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074792010

No. 05074794010. Series 7400 Kraftform torque screwdrivers with a customised facNo. 05074794010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7452 x 0.9-1.5 NmWera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074794010

No. 05074715010. Series 7400 Kraftform torque screwdrivers with a customised facNo. 05074715010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7460 x 0.3-1.2 NmWera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074715010

No. 05074716010. Series 7400 Kraftform torque screwdrivers with a customised facNo. 05074716010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7461 x 1.2-3.0 NmWera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074716010

No. 05074717010. Series 7400 Kraftform torque screwdrivers with a customised facNo. 05074717010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, pistol handle, 7462 x 3.0-6.0 NmWera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074717010

No. 05074728010. Series 7400 Kraftform torque screwdrivers with a customised facNo. 05074728010. Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, pistol handle, 7463 x 4.0-8.8 NmWera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074728010

No. 36888. Wiha Torque screwdriver iTorque® with digital scale (36888) 1,0-5,0 NNo. 36888. Wiha Torque screwdriver iTorque® with digital scale (36888) 1,0-5,0 Nm, 9-44 in.Ibs, 4 mm

Meets your requirements: A variably settable torque which covers a large range of usage.

Lowers your costs: The correct torque protects you from warranty claims.

Increases your efficiency: The correct torque avoids damaging material and no follow-up work is necessary.

Increases your productivity: Utmost process safety thanks to integrated ClickControl counting function and calibration alarm.

Standards: DIN EN ISO 6789.

Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade.