No. 05074840001. 7400 ESD series Kraftform Torque screwdrivers, with factory preNo. 05074840001. 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7460 ESD x 0.3 Nm x 0.3-1.2 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074840001

No. 05074842001. 7400 ESD series Kraftform Torque screwdrivers, with factory preNo. 05074842001. 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7461 ESD x 1.2 Nm x 1.2-3.0 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074842001

No. 05074820001. 7400 ESD series Kraftform Torque screwdrivers, with factory preNo. 05074820001. 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7450 ESD x 0.1 Nm x 0.1-0.34 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4", hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173).<,br>Please note: 1 Ncm = 0.01 Nm.05074820001

No. 05074822001. 7400 ESD series Kraftform Torque screwdrivers, with factory preNo. 05074822001. 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7451 ESD x 0.3 Nm x 0.3-1.0 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4", hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173).<,br>Please note: 1 Ncm = 0.01 Nm.05074822001

No. 05074824001. 7400 ESD series Kraftform Torque screwdrivers, with factory preNo. 05074824001. 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7452 ESD x 0.9 Nm x 0.9-1.5 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4", hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173).<,br>Please note: 1 Ncm = 0.01 Nm.05074824001

No. 05074828001. 7400 ESD series Kraftform Torque screwdrivers, with factory preNo. 05074828001. 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.0 Nm) and quick-release chuck, 7456 ESD x 0.3 Nm x 0.3-1.0 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. With quick-release chuck for rapid bit change. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21).<,br>Please note: 1 Ncm = 0.01 Nm.05074828001

No. 05074826001. 7400 ESD series Kraftform Torque screwdrivers, with factory preNo. 05074826001. 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.0 Nm) and quick-release chuck, 7455 ESD x 0.1 Nm x 0.1-0.34 NmWera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. With quick-release chuck for rapid bit change. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21).<,br>Please note: 1 Ncm = 0.01 Nm.05074826001

No. 05074720001. 7400 Imperial series Kraftform Torque screwdrivers, with factorNo. 05074720001. 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (2.5-29.0 in. lbs.) and Rapidaptor quick-release chuck, handle size 105 mm, 7465 x 2.5 in. lbs.Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074720001

No. 05074722001. 7400 Imperial series Kraftform Torque screwdrivers, with factorNo. 05074722001. 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (2.5-29.0 in. lbs.) and Rapidaptor quick-release chuck, handle size 105 mm, 7466 x 11 in. lbs.Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074722001

No. 05074721001. 7400 Imperial series Kraftform Torque screwdrivers, with factorNo. 05074721001. 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (25.0-55.0 in. lbs.) and Rapidaptor quick-release chuck, pistol handle, 7467 x 25 in. lbs. x 25-55 in. lbs.Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074721001

No. 05074715001. 7400 series Kraftform Torque screwdrivers, with factory pre-setNo. 05074715001. 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.3-3.0 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7460 x 0.3 Nm x 0.3-1.2 NmWera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074715001

No. 05074716001. 7400 series Kraftform Torque screwdrivers, with factory pre-setNo. 05074716001. 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.3-3.0 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7461 x 1.2 Nm x 1.2-3.0 NmWera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074716001

No. 05074790001. 7400 series Kraftform Torque screwdrivers, with factory pre-setNo. 05074790001. 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7450 x 0.1 Nm x 0.1-0.34 NmWera torque screwdriver. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074790001

No. 05074792001. 7400 series Kraftform Torque screwdrivers, with factory pre-setNo. 05074792001. 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7451 x 0.3 Nm x 0.3-1.0 NmWera torque screwdriver. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074792001

No. 05074794001. 7400 series Kraftform Torque screwdrivers, with factory pre-setNo. 05074794001. 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7452 x 0.9 Nm x 0.9-1.5 NmWera torque screwdriver. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074794001

No. 05074717001. 7400 series Kraftform Torque screwdrivers, with factory pre-setNo. 05074717001. 7400 series Kraftform Torque screwdrivers, with factory pre-set value (3.0-8.8 Nm) and Rapidaptor quick-release chuck, pistol handle, 7462 x 3.0 Nm x 3.0-6.0 NmWera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074717001

No. 05074728001. 7400 series Kraftform Torque screwdrivers, with factory pre-setNo. 05074728001. 7400 series Kraftform Torque screwdrivers, with factory pre-set value (3.0-8.8 Nm) and Rapidaptor quick-release chuck, pistol handle, 7463 x 4.0 Nm x 4.0-8.8 NmWera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4", external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.<,br>Please note: 1 Ncm = 0.01 Nm.05074728001

No. 96583629. 96583629 USB adaptor, jack cable and software Torkmaster Link betwNo. 96583629. 96583629 USB adaptor, jack cable and software Torkmaster Link between perfectControl or transducer and PC. For adjusting and calibrating torque wrenches and torque screwdrivers. Produces calibration certificates in accordance with DIN EN ISO 6789: 2003, which can be printed out or saved as PDF files. as found / as left calibrations can be documented. graphical representation of the torque progression user management 17 languages equipment testing systemSystem requirements: PC Microsoft Windows XP SP3 or later operating system USB connection

The BENNING Device Testing SET is ideal for testing single- and three-phase portThe BENNING Device Testing SET is ideal for testing single- and three-phase portable equipment. Direct combination and coordination ensure ease of use. Equipment databases and test results can be transferred to the software via various methods and are then available for evaluations, statistics, and documentation.

BENNING ST 760+ Appliance Tester Set for testing electrical devices/work equipment in accordance with DIN EN 50678 (VDE 0701), DIN EN 50699 (VDE 0702), DGUV Regulation 3, welding equipment in accordance with VDE 0544-4, DIN EN 60974-4, and medical electrical equipment in accordance with DIN VDE 0751-1, DIN EN 62353, such as hospital/nursing beds.

Set includes:
- Benning ST 760+ with calibration certificate
- Benning MA 4 adapter case
- Benning 1D barcode scanner
- Benning barcode labels 1 - 1000
- Benning Test Labels (1 roll = 300 pcs.)
- Benning Software PC-Win ST 750-760
- Faulty Equipment Label (1 sheet with 12 labels)

Measurements
- Insulation resistance measuring range: 0.1 MOhm - 100 MOhm
- Nominal test voltage: 100 V
- Nominal test voltage: 250 V
- Nominal test voltage: 500 V
- Nominal voltage: 1000 V
- Adjustable
- Protective conductor resistance measuring range: 0.05 Ohm - 10 Ohm
- Test current: 600 mA/10A
- Substitute leakage current: yes
- Differential current: yes
- Direct measurement: yes
- Protective conductor current: yes
- Contact current: Yes
- Protective conductor/touch current: 0.03 mA - 25 mA
- Load current measurement: Yes
- Power measurement: Yes
- Function test: V/A/W using the True RMS measurement method
- Testing of mobile PRCDs and types AC/A/F/B/B+
- Connection for external measuring adapters: Yes
- Testing of 3-phase loads using optional measuring adapters
- Additional measuring adapters available optionally
- Testing of extension cables: Yes
- Open-circuit voltage and touch current of the welding circuit
- Device leakage current, leakage current from the applied part types B, BF, and CF

BENNING ST760 appliance tester with a brilliant 7-inch color touch display (35% larger user interface) and innovative menu functions for simple and efficient initial testing/installation of new test objects. Smart menu features. Individually customizable device templates (24 templates per test standard) for quick test object creation with a single keystroke. Auto-ID function for automatic increment of the identification number (ID) when creating new test objects. Device data can be individually displayed via an ON/OFF slider for optimized handling and use by EUPs. Favorites menu for direct access to frequently used submenus. Softkey keyboard (QWERTZ), graphic fields describe the predefined functions. Automatic and manual test sequences with pass/fail indicators and measured value storage. Complete test object database including test history can be saved on an SD card. Interface options: Wi-Fi, Bluetooth, 4 x USB Type A, 1 x Mini-USB, 1 x RJ45, 1 x SD card slot. Includes USB-A printer port and free updates. Battery-powered user interface, e.g., in the event of a power failure, transport from test location to test location, access to the SD card is possible. ``` Active testing, passive testing, alternative testing, differential current method, direct method, and voltage measurement are possible. Dimensions (LxWxD): approx. 405x330x165 mm, weight: approx. 6 kg. The test device comes in a robust protective case (IP67), self-compensating test lead, 4 mm test lead, test probe, and alligator clip set, power cable, SD card, PC software, barcode scanner, 1,000 barcode labels, 300 test stickers, and calibration certificate.

BENNING MA 4 active measuring adapter for active and passive testing of single- and three-phase devices (including welding machines), as well as extension cables. Connection for devices under test with CEE 16 A/230 V, CEE 16 A/400 V, and CEE 32 A/400 V plugs. The measuring adapter can be fully loaded with 32 A. Supported measurements: RPE protective conductor resistance, RISO insulation resistance, IDiff residual current, IEA equivalent leakage current, tripping time, and tripping current of PRCDs. Equipment and cable functional testing including line break, short-circuit, and phase sequence testing. Self-test: Intentional activation of a device residual current (1 mA/3 mA) to test the entire test system. 7 status LEDs and 1 power LED. Robust and dust/waterproof protective case IP 67.

The compact and multifunctional test device SAFETYTEST 1IT+ is used for initialThe compact and multifunctional test device SAFETYTEST 1IT+ is used for initial and repeat testing as well as testing after repair circuit tree, device tree, work equipment tree and rooms with simple and revolutionary linking.
-Easy synchronization and individual rights management with the remote master cloud.

-Individually configurable customer access to test documentation, work equipment lists and other evaluations in the remote master cloud.

-Elaborate visual inspections can easily be created with the procedure manager:
Ladders and steps, hospital beds, fire doors, shelves, fire extinguishers and much more.

-Based on the master data, the limit values are classified for easier testing and evaluation according to the applicable standard.

-Charging of the integrated Li-Ion batteries via Schuko plug 230 V.

-USB-C port can be used to charge the tablet.

-Individual procedures enable optimally adapted test routines for your everyday testing (optional).

-Protocol editor allows customizing protocol templates (optional).

-Ergonomic and compact design.

Tests for DIN VDE 0100-600, 0105:100, DIN VDE 0113-1, DIN EN 62353, DIN VDE 0544-4 (with ARC-Welding Adapter) and DIN VDE 0701 / 0702 or DIN EN 50567 / 50699 tests.

-Innovative app control for the operating systems IOS and Android.

-One device for systems and mobile / stationary equipment.

-Integrated magnetic tablet holder, also suitable for smartphones. -Automatic test sequences for systems, devices, machines and all types of work equipment (ladders and steps, shelves, etc.).

-Individually created test sequences for systems, equipment and objects.

-Low resistance measurement.

-Insulation measurement with iso ramp.

-Innovative loop and network impedance measurement in one measurement process, also behind RCDs.

-Measurement of residual, leakage and phase currents.

-Contact voltage, phase voltage and phase sequence.

-RCD testing of types A / B / B+ / EV / F.

-Groundbreaking RCD frequency simulation up to 1Khz for types F / B / B+.

-3-pole earth measurement.

-Residual voltage measurement.

-Measurement in networks: TN,TT and IT.

-Measurement category: CAT III 600 V / CAT IV 300 V.

-Bluetooth LE (Low Energy).

-Lightning-fast polarity reversal during DIN VDE 0701-0702 tests.

-Simple photo documentation.
Delivery content:

-Test leads 4 mm red, black, approx. 2 m.

-Measuring line Schuko approx. 1.4 m.

-Triple test lead red, blue, green.

-Soft pockets for device & accessories.

-Measuring tips with 4mm socket red, blue and green, CATIV or CATII.

-Test terminals red, blue and green, CATIII 1000 V.

-Factory calibration certificate.

Benning ST 760+ BTEC set. Device tester for testing electrical devices/work equiBenning ST 760+ BTEC set. Device tester for testing electrical devices/work equipment in accordance with DIN EN 50678 (VDE 0701), DIN EN 50699 (VDE 0702), DGUV regulation 3, welding machines in accordance with VDE 0544-4, DIN EN 60974-4 and medical-electrical devices in accordance with DIN VDE 0751- 1, DIN EN 62353, such as hospital/care beds. Display graphically. Limit display yes. Measurements: Insulation resistance measuring range 0.1 MOhm - 100 MOhm. Nominal test voltage 100 V. Nominal test voltage 250 V. Nominal test voltage 500 V. Nominal voltage 1000 V. Adjustable. Protective conductor resistance measuring range 0.05 ohm - 10 ohm. Test current 600 mA/10A. Replacement leakage current, yes. Differential current yes. Direct measurement yes. Protective conductor current, yes. Touch current yes. Protective conductor/touch current 0.03 mA - 25 mA. Consumer current measurement, yes. Performance measurement, yes. Functional test V/A/W in the True RMS real effective value measurement method. Testing mobile PRCDs and type AC/A/F/B/B+. Connection for external measuring adapters, yes. Testing 3-phase consumers using optional measuring adapters. Additional measuring adapters optionally available. Checking extension cables, yes. Open circuit voltage and contact current of the welding circuit. Device leakage current, leakage current from applied part types B, BF and CF.

Special features: Brilliant 7 inch color touch display (35% larger user interface) with innovative menu functions for simple and efficient initial testing/creation of new test items. Smart menu functions: Individually adaptable device templates (24 templates per test standard) for quick creation of test items using a single keystroke, Auto-ID function for automatic incrementing of the identification number (ID) when creating new test items, individually via ON/OFF Slider displayable device data for optimized handling and use by EUPs. Favorites menu for direct jump to frequently used submenus. Softkey keyboard (QWERTZ), graphic fields describe the predefined functions. Automatic test procedure, yes. Automatic and manual test sequence with good/bad display. Measured value storage, yes. Complete test object database including test history can be saved on SD card. Interface version WLAN, Bluetooth, 4 x USB Type A, 1 x mini-USB, 1 x RJ 45, 1 x SD card slot. Printer port USB-A. Free updates. Battery-supported user interface, e.g. B. in the event of a power failure, transport from test location to test location, access to SD card possible. Active testing yes. Passive testing, yes. Alternative method yes. Differential current method yes. Direct method yes. Voltage measurement, yes. Dimensions length 405 x width 330 x depth 165 mm. Weight: 6kg. Test device in a robust protective case (IP67), self-compensating test lead, 4 mm measuring lead, test tip, alligator clip set, cold device lead, SD card, BTEC Smart 1 year - 100% voucher, barcode scanner, barcode labels 1000 pieces, test stickers 300 pieces, calibration certificate.

Properties

Manufacturer: Benning

Description: Device tester BTEC set

Type: BENNINGST760+BTECSET

Display: graphic

Limit display: yes

Insulation resistance measuring range: 0.1..100 Mohm

Protective conductor resistance measuring range: 0.05..10 Ohm

Protective conductor current: yes

Touch current: yes

Consumer current measurement: yes

Performance measurement: yes

Leakage current measurement DC: yes

Tripping time measurement of (P)RCDs: yes

Connection for external measuring adapter: yes

Testing extension cables: yes

Automatic test sequence: yes

Measured value memory: yes

Printer integrated: no

Active testing: yes

Passive test: yes

Alternative method: yes

Differential current method: yes

Direct method: yes

Voltage measurement: yes

Suitable for use by an instructed person: yes

Interface version: Wi-Fi

Printer port: USB-A

Test according to EN 50678: yes

Test according to EN 50699: yes

Test according to EN 62638: no

Test according to EN 62911: no

Testing according to IEC/EN 60974-4: yes

Testing according to IEC/EN 62353: yes

Entering test item information: yes

Testing according to VDE 0701: yes

Test according to VDE 0702: yes

Test according to VDE 0701/0702: no

Testing according to VDE 0751: yes

Testing according to VDE 540-4: yes.