Increases your efficiency: Narrow, pointed plier head guarantees optimal accessibility even to areas that are difficult to access.

Protects your health: Reduces strain from continuous work thanks to opening spring.

Lowers your costs: Electrostatically conductive tools protect electronic components from damage.

Product dimensions: 113 x 108 x 19 mm (LxWxD)

Application: For cutting different hardnesses of wires in places which are difficult to access.

Standards: IEC 61340-5-1.

DIN ISO 9654.

Meets your requirements: For cutting wires of various hardness levels.

Protects your health: Reduces strain from continuous work thanks to opening spring.

Lowers your costs: Electrostatically conductive tools protect electronic components from damage.

Product dimensions: 119 x 85 x 19 mm (LxWxD)

Application: All round electronic diagonal cutter for cutting wires of different hardnesses.

Standards: IEC 61340-5-1.

DIN ISO 9654.

Increases your efficiency: Wiha needle nose pliers with extra-long plier head for inserting low-lying components.

Protects your health: Special DynamicJoint® design reduces effort required for cutting.

Increases your safety: Wiha combination pliers enable safe, non-slip gripping in all work situations.

Product dimensions: 353 x 237 x 44 mm (LxWxD)

Application: The basic equipment for different jobs and different locations.

3-part set: Combination pliers, needle nose pliers, diagonal cutters

DynamicJoint® - Innovative unique joint design

No twisting or slipping

Different pliers are required for work at different points of use. The Classic pliers set from Wiha contains combination and needle nose pliers, as well as diagonal cutters, which constitute the perfect basic equipment for every tradesman. With the Wiha OptiGrip function, the combination pliers allow secure gripping without slipping. The needle nose pliers are perfect for inserting low-lying components, as well as holding, bending and cutting wires. Also contained in the set, the diagonal cutters impress as a universal cutter to slice soft and hard wires. Its special DynamicJoint® joint design also reduces effort required for cutting.

Combination pliers DIN ISO 5746
Gripping and cutting pliers: DIN ISO5749 and DIN ISO 5745

Content:

• 1x Combination pliers Classic with DynamicJoint® and OptiGrip with extra long cutting edge 180 mm, 7" (10335)
• 1x Diagonal cutters Classic with DynamicJoint® 160 mm, 6 1/2" (43332)
• 1x Classic needle nose pliers with cutting edge straight shape 160 mm, 6 1/2" (26718)

Lowers your costs: Prevents damage caused by lost circlips in the work area.

Saves time: Safe and sturdy grip on circlips.

Product dimensions: 282 x 178 x 34 mm (LxWxD)

Application: For fitting / removing circlips externally to / from shafts or axles.

Supplementary information: with safety latching function MagicTips®

DIN ISO 5254.

Meets your requirements: Permanently stable through box joint with double guidance.

Increases your efficiency: Fast and simple adjustment of pliers with push button.

Product dimensions: 370 x 100 x 35 mm (LxWxD)

Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.

Material: High quality chrome vanadium molybdenum steel, tempered.

Turning, pulling, gripping and holding of e.g. pipes or tightening screws and nuts

9-level gradation - flexible adjustment of the gripping width at the push of a button

Secure hold on the workpiece thanks to self-clamping

Highest stability thanks to a box type joint

Kind to hands and muscles

Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer an optimum grip for all occasions. With a 9-step detent adjustment, it offers maximum variability for work in the installation area, where it can be quickly and easily adjusted and locked at the push of a button. Crushing injuries are prevented thanks to the integrated clamping protection. The pliers are equipped with a box-type joint, which ensures maximum stability due to the double guidance. At the same time, the slim design in the head and joint areas provides easy access to the workpiece, even in confined work areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. What's more, the ergonomically shaped pliers handle ensures comfortable, fatigue-proof work. In addition, slipping off the work piece is prevented by self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable, secure grip with long-term durability. The high-quality chrome vanadium molybdenum steel guarantees robustness and a long service life. The robust water pump pliers are dirt-resistant.

To benefit from this product for as long as possible, we recommend regularly applying a drop of oil after use.

DIN ISO 8976.

Meets your requirements: Permanently stable through box joint with double guidance.

Increases your efficiency: Fast and simple adjustment of pliers with push button.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.

Product dimensions: 300 x 100 x 32 mm (LxWxD)

Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.
For working on live parts up to 1,000 V AC.

Standards: Manufactured acc. to IEC 60900.

Turning, pulling, gripping and holding of e.g. pipes or tightening screws and nuts

9-level gradation - flexible adjustment of the gripping width at the push of a button

Secure hold on the workpiece thanks to self-clamping

Highest stability thanks to a box type joint

Kind to hands and muscles

Safe operation up to 1,000 V AC

Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer the optimal grip for all occasions. With a 9-step detent adjustment it offers maximum variability in the installation area, where it can be quickly and easily adjusted and locked at the push of a button. Crushing injuries are prevented thanks to the integrated clamping protection. Double guidance based on a box joint ensures the greatest stability of the pliers. At the same time, the slim design in the head and joint area provides reliable access to the work piece, even in confined areas. The handles of the pliers are covered in anti-slip plastic and offer users a strong grip, even in oily or wet work situations. The ergonomically shaped handles of the pliers also ensure comfortable, fatigue-proof work. In addition, slipping off the work piece is prevented by the self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable secure grip with long-term durability. The robust water pump pliers are dirt resistant. The water pump pliers are manufactured as per the international IEC 60900 standard and thus approved for working on live parts up to 1,000 V AC.

DIN ISO 8976.

Simplifies your work: The angled head allows you to work in hard-to-reach places such as installation sockets.

Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.

Saves money: Now you only need one tool for three tasks: cutting to length, stripping and skinning.

Increases your efficiency: Three tools in one. Saves 60% volume and 50% less weight for 100% efficiency.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Product dimensions: 175 x 100 x 46 mm (LxWxD)

Application: Suitable for cutting soft and hard wires and cables, such as NYM lines. Also ideal for flush stripping of round and moisture-proof cable and skinning of conductors, even in hard-to-reach spots, such as those inside junction and distribution boxes.

3in1: Cutting-to-length, stripping, and skinning

Special head shape allows working in pre-cast wall sockets

Kind to hands and muscles

Safe operation up to 1,000 V AC

The TriCut installation pliers electric do the work of three tools. These flawlessly manufactured installation pliers are the optimum helper for working with cables as they combine the three most important tools in one: diagonal cutters, skinning pliers and stripping pliers. The specially angled plier head ensures that cables are stripped and skinned lengthwise along the cable and pliers, using an ergonomic approach which saves users from applying excessive force. The TriCut thus offers a decisive advantage over other pliers, especially in confined spaces such as junction and distribution boxes. The TriCut diagonal cutters are able to cut not just cables but also hard wires or even chains. The extra wide back of the handle with integrated soft and hard zones and curved handle ends prevent fingers from slipping. Individually tested to international IEC standard 60900, these pliers guarantee uncompromising safety, enabling users to work safely on live parts up to 1,000 V AC.

Manufactured acc. to IEC 60900.

Meets your requirements: White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.

Simplifies your work: Makes work easier, optimum impact effect and less effort needed.

Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.

Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.

Product dimensions: 375 x 125 x 40 mm (LxWxD)

Extra: With cast iron balls inside the hammer head for recoilless work.

GS tested.

Increases your efficiency: The specialist with 120x greater lifespan* thanks to optimised bit for T-shaped screws(*compared to Wiha standard bit)

Lowers your costs: Bit quick and easy to find thanks to blue marking - even in dark environments by using an UV light.

Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan.

Product dimensions: 186 x 112 x 25 mm (LxWxD)

Application: Suitable for fastening metal screws. Also suitable for impact screwdrivers.

For Impact screw connections in metal

Work bench stand function

Patented bit technology for 120x increased service life

Easy to find in the dark with UV light

With 12 bits and bit holder

Until now, there was no clarity when buying bits as to which bits were suitable for which application. Wiha puts an end to the complexity of the combination of used tools, the specific fastening type and the wide selection of different bits. Thanks to Wiha's revolutionary bit concept, the screw shape is the only decisive factor when selecting the right bit. For example, the T bit is ideal for fastening T-shaped metal screws. Thanks to its patented extended torsion zone, this bit is also suitable for impact screwdrivers and has a 120x greater lifespan compared to Wiha standard bits. The colored bits are quick and easy to find. Thanks to their color coating, they are also readily spotted in the dark with a UV light. In this way, fewer bits are lost, thus saving you the expense of acquiring new ones. The bits in the most common drives are stored neatly and compactly away in the XLSelector, which additionally serves as a work bench stand.

DIN 3126, ISO 1173 style E 6.3

Content:

• 1x T-Bit 50 mm Phillips 1/4" PH1
• 1x T-Bit 50 mm Phillips 1/4" PH2
• 1x T-Bit 50 mm Phillips 1/4" PH3
• 1x T-Bit 50 mm TORX® 1/4" T15
• 1x T-Bit 50 mm TORX® 1/4" T20
• 1x T-Bit 50 mm TORX® 1/4" T25
• 1x T-Bit 50 mm TORX® 1/4" T30
• 1x T-Bit 50 mm TORX® 1/4" T40
• 1x T-Bit 50 mm Hexagon 1/4" 3,0
• 1x T-Bit 50 mm Hexagon 1/4" 4,0
• 1x T-Bit 50 mm Hexagon 1/4" 5,0
• 1x T-Bit 50 mm Hexagon 1/4" 6,0
• 1x Bit holder magnetic 58 mm 1/4" (01895)
• 1x XLSelector

Increases your efficiency: The specialist with 120x greater lifespan* thanks to optimised bit for Y-shaped screws(*compared to Wiha standard bit)

Lowers your costs: Bit quick and easy to find thanks to yellow marking - even in dark environments by using an UV light.

Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan.

Product dimensions: 186 x 112 x 25 mm (LxWxD)

Application: Suitable for fastening wood screws. Also suitable for impact screwdrivers.

For Impact screw connections in wood

Work bench stand function

Patented bit technology for 120x increased service life

Easy to find in the dark with UV light

With 12 bits and bit holder

Until now, there was no clarity when buying bits as to which bits were suitable for which application. Wiha puts an end to the complexity of the combination of used tools, the specific fastening type and the wide selection of different bits. Thanks to Wiha's revolutionary bit concept, the screw shape is the only decisive factor when selecting the right bit. For example, the Y bit is ideal for fastening Y-shaped wood screws. Thanks to its patented extended torsion zone, this bit is also suitable for impact screwdrivers and has a 120x greater lifespan compared to Wiha standard bits. The colored bits are quick and easy to find. Thanks to their color coating, they are also readily spotted in the dark with a UV light. In this way, fewer bits are lost, thus saving you the expense of acquiring new ones. The bits in the most common drives are stored neatly and compactly away in the XLSelector, which additionally serves as a work bench stand.

DIN 3126, ISO 1173 style E 6.3

Content:

• 2x Y-Bit 50 mm Pozidriv 1/4" PH2
• 1x Y-Bit 50 mm Pozidriv 1/4" PZ1
• 2x Y-Bit 50 mm Pozidriv 1/4" PZ2
• 1x Y-Bit 50 mm Pozidriv 1/4" PZ3
• 1x Y-Bit 50 mm TORX® 1/4" T10
• 1x Y-Bit 50 mm TORX® 1/4" T15
• 1x Y-Bit 50 mm TORX® 1/4" T20
• 1x Y-Bit 50 mm TORX® 1/4" T25
• 1x Y-Bit 50 mm TORX® 1/4" T30
• 1x Y-Bit 50 mm TORX® 1/4" T40
• 1x Bit holder magnetic 58 mm 1/4" (01895)
• 1x XLSelector