Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
All prices are net. Packing, transport and taxes will be charged additionally.
Items: 31886
Order-No.
Information
4250838503150
Bernstein
Bernstein
ESD Spitzenschneider BLACKline Flush 125mm ableitfaehigCutters and Pliers
No. 3-906-7. cutting capacity soft/medium/hard/piano xD8 in mm:xA00.8/0.6/0/0 head width 13 mm oblique cutting with 7 mm blades, jaw length 25 mm For working in hard-to-reach places, for flush cutting. The pliers of this program have been successfully tested by several test laboratories according to DIN EN 61340-5-1, 61340-2-1 as well as 61340-2-3 for work in ESD-protected areas. BLACKline pliers are characterised by their slender, dip-insulated handles. The highly polished surface and the inlaid knuckle guarantee a long service life with good care. The very narrow pliers heads are ideal for working on filigree components. material high-quality steel (HRC 56-58) surface glossy steel polished handle dipped insulation ESD non-slip, dissipative 3x10^7 Ohm length 125 mm weight 75 g Flush (mini side face cut with small top)
show more
Price: EUR 56.32
Haushaltsschere 180mmKnives, Scissors
No. 5-311. very stable and robust scissor material high-quality steel length 180 mm weight 80 g cutting length 70 mm
Price: EUR 12.94
ESD Hebelwerkzeug SPUDGER Metalloeffner flach
No. 2-123. EPA suitable. For working in electrostatically protected areas (ESD workplace / ESD protection zone). For levering off micro plug connections in electronic devices. with dissipative coating length 180 mm weight 19 g for the disassembly of smartphones
Price: EUR 8.78
4250838525855
Bernstein
Bernstein
ESD Seitenschneider TECHNICline Flush matt 120mm ableitfaehiCutters and Pliers
No. 3-962-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA01.2/1.0/0/0 head width 10 mm blade length 8 mm CARE NOTE: High humidity or touching the pliers head with your fingers (sweat) causes rusting. Therefore, the pliers should always be kept dry or protect with oil for storage. If there is any rust on the pliers head, it can be easily removed, with a slight polish. Our ESD tools comply with the following ESD standards DIN EN 61340-5-1, VDE 0300-5-1:2017-07, DIN EN 61340-2-1, VDE 0300-2-1:2016-07, DIN EN 61340-4-6, VDE 0300-4-6:2016-04. We achieve a discharge resistance of 10^6 to 10^9 ohm with the pliers handles. Attention, the use of hand tools alone is not enough to avoid electrostatic charge. For general safety, please use our wrist grounding and ESD mats, for further information see the section workplace equipment. Very fine side cutters with narrow, rounded pliers head. This version is available with flush, semi flush and full flush. The pliers are suitable for cutting general resistance wire, solder wire, winding wire and heating wire (thermocouple wire). Specifically for copper wire, brass wire, steel wire, iron wire, aluminum wire, bonding wire, tin wire, nickel wire, gold wire, silver wire, platinum wire, tungsten copper wire, tungsten wire, glass fiber and kevlar. Please note the cutting capacity in the pliers handles and the care instructions for a longlife of your pliers. For special applications and individual solutions, please contact us, we are pleased to advise you. material ball bearing steel (HRC 63-65) surface without reflection matt polished dissipative between 10^6 and 10^9 ohm length 120 mm weight 75 g Flush (mini side face cut with small top)
show more
Price: EUR 55.90
4250838525909
Bernstein
Bernstein
ESD Seitenschneider TECHNICline Flush 125mm ableitfaehigCutters and Pliers
No. 3-972-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA01.6/1.2/0/0 head width 12.5 mm blade length 10 mm CARE NOTE: High humidity or touching the pliers head with your fingers (sweat) causes rusting. Therefore, the pliers should always be kept dry or protect with oil for storage. If there is any rust on the pliers head, it can be easily removed, with a slight polish. Our ESD tools comply with the following ESD standards DIN EN 61340-5-1, VDE 0300-5-1:2017-07, DIN EN 61340-2-1, VDE 0300-2-1:2016-07, DIN EN 61340-4-6, VDE 0300-4-6:2016-04. We achieve a discharge resistance of 10^6 to 10^9 ohm with the pliers handles. Attention, the use of hand tools alone is not enough to avoid electrostatic charge. For general safety, please use our wrist grounding and ESD mats, for further information see the section workplace equipment. Strong side cutters with rounded pliers head. This version is available with flush, semit flush and full flush. The pliers are suitable for cutting general resistance wire, solder wire, winding wire and heating wire (thermocouple wire). Specifically for copper wire, brass wire, steel wire, iron wire, aluminum wire, bonding wire, tin wire, nickel wire, gold wire, silver wire, platinum wire, tungsten copper wire, tungsten wire, glass fiber and kevlar. Please note the cutting capacity in the pliers handles and the care instructions for a longlife of your pliers. For special applications and individual solutions, please contact us, we are pleased to advise you. material ball bearing steel (HRC 63-65) surface without reflection matt polished dissipative between 10^6 and 10^9 ohm length 125 mm weight 80 g Flush (mini side face cut with small top)
show more
Price: EUR 56.23
N.F. ELECTRONIC CLEANER 50 MLCleaning Fluids
No. 33116-AA. A unique non-flammable precision cleaner suitable for cleaning and degreasing all types of electrical and electronic components where a shutdown is either impossible or very expensive. CRC N.F. Electronic Cleaner is free of chlorinated solvents, CFC s and HCFC s, solvent based, non-flammable, dries fast.
show more
Price: EUR 56.31
Precision Phillips screwdriverScrew Drivers
Tip #000, blade length 40 mm. By Wiha with PicoFinish handles.
Price: EUR 13.45
SCHRAUBZWINGE, SPANNWEITE 800MMMisc., hammer, saws, files
No. 420-120-800.
- Profi-F-Schraubzwinge mit einem feststehenden und einem verstellbaren Spannarm, beide an einer galvanisierten Profilstahlschiene befestigt
- Verzinkte Schraube mit kunststoffummanteltem Kugel-Schwenkfuß für sicheres und einfaches Einspannen auch unregelmäßiger Werkstücke
- Widerstandsfähig und wetterfest
- Vierkant-Kunststoffgriff
show more
Price: EUR 56.11
SCHRAUBZWINGE, SPANNWEITE 400MMMisc., hammer, saws, files
No. 420-140-400.
- Profi-F-Schraubzwinge mit einem feststehenden und einem verstellbaren Spannarm, beide an einer galvanisierten Profilstahlschiene befestigt
- Verzinkte Schraube mit kunststoffummanteltem Kugel-Schwenkfuß für sicheres und einfaches Einspannen auch unregelmäßiger Werkstücke
- Widerstandsfähig und wetterfest
- Vierkant-Kunststoffgriff
show more
Price: EUR 55.61
STECHBEITEL, SATZ 12, 18, 25MM MIT INDIVIDUELLEN HOLSTERNMisc., hammer, saws, files
No. 414-S3-EUR.
- 1-Komponenten-Griff aus Polypropylen
- Präzisionsgeschliffene Schneide für maximale Schärfe
- Gehärtet und wärmebehandelt für lange Lebensdauer
- Satz mit individuellen Schutz-Holstern
Price: EUR 56.28