• Wire stripper with cable shears - two essential electrical installation tools in one pair of pliers
• Integrated cable shears for the clean cutting of Cu- and Al-cables without crushing up to Ø 15 mm (5 x 2,5 mm²)
• cutting edges additionally induction-hardened, cutting edge hard ness approx. 57 HRC
• Universal adjustment of the stripping blades by means of a knurled screw
• slim dimensions for easy access
• Stripping of single-, multi- and fine stranded cond uctors with plastic or rubber insulation up to Ø 5 mm or 10 mm² cross-section
• Graduated jaw provides a visual orientation aid when stripping wire in standard lengths (11 mm and 16 mm)
• Pliers with integrated, insulated tether attachment point for a tool tether

• For particularly demanding precision work: made from high-quality, martensitic hardened stee l, tough and highly resistant to corrosion
• Stainless steel with a slim, tapered design for m aximum precision when cutting, dissecting and segmenting extremely small objects in tight spaces
• For the electronics industry, as well as repairs and handicrafts
• Mainly used for cuttin g soft copper, gold or silver wires, as well as magnetic wires
• With extremely hard and sharp oblique cutting nippers
• Also available as an ESD-version: with black epoxy resin coating an d a surface resistance between 10^3 and 10^9 ohms
• ESD version only: this allows to compansat e in a controlled manner the differences in potential between the operator and electronic components

• Makes it easy to hold, insert and pull even the smallest elongated components
• With g ripping surfaces in dimensionally adapted designs, for example for firmly and securely positioning o r pulling sensitive rounded or cuboid components
• For through-hole technology (THT) and pin-i n-hole technology (PIH)
• Antimagnetic to avoid electromagnetic damage
• This allows to compansate in a controlled manner the differences in potential between the operator and electronic c omponents
• With a tested black epoxy resin coating with a surface resistance between 10^4 and 10^9 ohms

Simplifies your work: A secure, non-slip grip in all common work situations thanks to the Wiha combination pliers.

Increases your efficiency: Compact and space-saving tool range.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Product dimensions: 353 x 237 x 44 mm (LxWxD)

Application: Selected stock for most common applications.

Design: High quality tools in a practical toolbag.

Design: Pocket size approx. 31 x 24 x 4 cm.

Design: Weight 875 g.

Content:

• 1x Screwdriver SoftFinish® Slotted with round blade for low-lying screws 3.5 mm x 100 mm (00691)
• 1x Screwdriver SoftFinish® Slotted with round blade for low-lying screws 4.5 mm x 125 mm (00697)
• 1x Screwdriver SoftFinish® Slotted with round blade 6.5 mm x 150 mm (00703)
• 1x Screwdriver SoftFinish® Phillips with round blade PH1 x 80 mm (00756)
• 1x Screwdriver SoftFinish® Phillips with round blade PH2 x 100 mm (00759)
• 1x Combination pliers Industrial with DynamicJoint® and OptiGrip with extra long cutting edge 180 mm, 7" (30826)
• 1x Tool kit

Makes handling easier: Always the correct key when you need it.

Saves time: Ensures order: removal and targeted insertion in the holder is child's play.

Increases your efficiency: Wiha MagicSpring® holding feature holds all Torx® screws in place without a magnet.

Product dimensions: 342 x 130 x 45 mm (LxWxD)

Application: Suitable for positioning, fastening and loosening TORX® screws in difficult-to-access spots.

Quick removal: turn the L-key and pull it out

Nonmagnetic holding feature

It's a common experience. It is not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates the bother in an ingenious way. Turning one L-key in the holder makes all the other keys turn to the side at the same angle, allowing you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. Thanks to the MagicSpring® holding feature (from size T6), the L-keys hold all TORX® screws firmly in any position perfectly without any magnets. The set contains thirteen black-oxidised TORX® L-keys in standard sizes. The L-key set can be hung up directly at the workplace using the suspension bracket on the holder.

Content:

• 1x L-keys TORX®, black oxidised T5 x 72 mm (24313)
• 1x L-keys TORX® MagicSpring®, black oxidised T6 x 80 mm (31233)
• 1x L-keys TORX® MagicSpring®, black oxidised T7 x 88 mm (31234)
• 1x L-keys TORX® MagicSpring®, black oxidised T8 x 101 mm (31235)
• 1x L-keys TORX® MagicSpring®, black oxidised T9 x 111 mm (31236)
• 1x L-keys TORX® MagicSpring®, black oxidised T10 x 121 mm (31237)
• 1x L-keys TORX® MagicSpring®, black oxidised T15 x 136 mm (31238)
• 1x L-keys TORX® MagicSpring®, black oxidised T20 x 148 mm (31239)
• 1x L-keys TORX® MagicSpring®, black oxidised T25 x 163 mm (31240)
• 1x L-keys TORX® MagicSpring®, black oxidised T27 x 176 mm (31241)
• 1x L-keys TORX® MagicSpring®, black oxidised T30 x 191 mm (31242)
• 1x L-keys TORX® MagicSpring®, black oxidised T40 x 210 mm (31243)
• 1x L-keys TORX® MagicSpring®, black oxidised T45 x 232 mm (31244)
• 1x ErgoStar holder