Are you looking for a multimeter that covers the relevant measurement variables from the everyday life of an electrician? With the digital multimeter from Wiha you are optimally equipped for a wide variety of measurements. Voltage, current, resistance, frequency, capacitance and temperature measurements can all be performed with this one tool. Continuity tests and diode tests are also possible. Thanks to a large LCD display with background lighting and data hold function, the measurement results can be read immediately and beyond the measurement process. The additional bar graph display ensures that changes are recognized quickly and clearly. An additional signal tone signals the current flow during the continuity test. Thanks to the automatic measuring range selection, manual pre-selection of specific measuring ranges is no longer necessary. Measuring the TRUE-RMS values makes it easier to use the measurement results. Saving previous measurement results and comparing them with future measurement results enables various control options. In addition, there is an optimal result determination through the generation of minimum and maximum values. According to the measurement categories CAT III up to 1,000 V AC and CAT IV up to 600 V AC, the digital multimeter from Wiha offers maximum safety for work in the area of building installations and directly on sources of low-voltage installations.

Specifications:
Order no. 45215
EAN 4010995452155
Battery: 2x AAA batteries
Current AC: 40mA - 10A
Current DC: 40mA - 10A
Accuracy: +/- 1% of reading
Voltage V AC min - max: 0 - 1000
Voltage V DC min - max: 0 - 1000
Resistance (M ): 200M
Frequency (MHz): 60MHz
Pollution degree: 2
True RMS: Yes
Measuring range selection: automatic / manual
Non-Contact Voltage Testing: Yes
Data HOLD: Yes
Relative value measurement: Yes
Battery Level Indicator: Yes
Backlight: Yes
Min Measurement: Yes
Max Measurement: Yes
Measurement Category: CAT IV 600V / CAT III 1,000V
Display: 6,000 digits
Degree of protection: IP 40
Fuse: F 600 mA / 1,000 V ceramic 6.3 x 32 and F 10 A / 1,000 V ceramic 6.3 x 32
Temperature measurement: -200°C to 1,350°C
Diode Test: Yes, up to 2V
Operating temperature: 0°C - 50°C
Storage temperature: -10°C - 60°C
Altitude above sea level: 2000m
Acoustic signal: Yes
Capacitance (mF): 60mF
Dimensions: 150 x 80 x 45mm
Standards: EN 61010-1, EN 61010-2-033, EN 61010-031, IP40, CE CAT II 1000V / CAT IV 600V

When working, for example, on electrical systems that cannot be switched off, current measurements are a major challenge. With the current measuring clamp from Wiha, measurements can be carried out using the clamp fork without interrupting the circuit. Handling is made significantly easier by the contactless one-hand test. The test prods enable further tests: voltage measurements in the AC and DC range as well as resistance, frequency and capacitance measurements. They also enable continuity tests and diode tests. This multifunctionality significantly increases efficiency. The measurement results can be read immediately and beyond the measurement process using a large LCD display with background lighting and data hold function. An additional signal tone signals the current flow during the continuity test. In addition, thanks to the integrated flashlight function, the current measuring clamp from Wiha offers optimal lighting conditions, even in poorly lit work environments. Together with the True RMS function, the LPF function increases the process reliability of your test by providing interference-free effective values. In accordance with measurement category CAT IV up to 1,000 V, the current measuring clamp offers maximum safety when working directly on sources of low-voltage installations.

Specifications:
Order no. 45219
EAN 4010995452193
Voltage V DC min - max: 0 - 1500
Voltage V AC min - max: 0 - 1000
Current A DC: 400
Current A AC: 400
Resistance (M ): 40M
Built-in Flashlight: Yes
Frequency (MHz): 5MHz
True RMS: Yes
Backlight: Yes
Data HOLD: Yes
Min Measurement: Yes
Max Measurement: Yes
Measurement category: CAT IV 1,000 V
Non-Contact Voltage Testing: Yes
with battery: Yes
AVG Measurement: Yes
Continuity test: < 30
Capacitance (uF): 100uF
Standards: IP40 CAT IV 1000V

Are you looking for a multimeter that covers the relevant measurement variables from the everyday life of an electrician? With the digital multimeter from Wiha you are optimally equipped for a wide variety of measurements. Voltage, current, resistance, frequency, capacitance and temperature measurements can all be performed with this one tool. Continuity tests and diode tests are also possible. Thanks to a large LCD display with data hold function, the measurement results can be read immediately and beyond the measurement process. An additional signal tone signals the current flow during the continuity test. Thanks to the automatic measuring range selection, manual pre-selection of specific measuring ranges is no longer necessary. Another advantage is the relative value measurement. The storage of previous and the comparison with future measurement results enables a wide variety of control options. According to the measurement categories CAT III up to 600 V and CAT IV up to 300 V, the digital multimeter from Wiha offers maximum safety for work in the area of building installations and directly on sources of low-voltage installations.

Specifications:
Order no. 45218
EAN 4010995452186
Battery: 2x AAA batteries
Current AC: 40mA - 10A
Current DC: 40mA - 10A
Accuracy: +/- 1% of reading
Voltage V AC: min - max 0 - 600
Voltage V DC: min - max 0 - 600
Resistance (M ): 40M
Frequency (MHz): 5MHz
Pollution degree: 2
True RMS: No
Measuring range selection: automatic
Non-contact voltage testing: No
Data HOLD: Yes
Relative value measurement: Yes
Battery Level Indicator: Yes
Backlight: No
Min Measurement: No
Max measurement: No
Measurement Category: CAT IV 300V / CAT III 600V
Display: 4,000 digits
Degree of protection: IP 40
Fuse: F 400 mA / 600 V ceramic 6.3 x 32 and F 10 A / 600 V ceramic 6.3 x 32
Temperature measurement: -20 to 500°C
Diode Test: Yes, up to 2V
Operating temperature: 0°C - 50°C
Storage temperature: -10°C - 50°C
Altitude: above sea level 2000m
Acoustic signal: Yes
Capacitance (nF): 100nF
Dimensions: 150 x 80 x 45mm
Standards: EN 61010-1, EN 61010-2-033, EN 61010-031, IP 40, CE, GS CAT II 600V / CAT IV 300V