Diamond drill bits for granite, hard stone, tiles and porcelain stoneware - depth of cut 35 mm
- from 18 mm equipped with Click & Drill system
- no angle grinder required, just a drill
- precise positioning, center drill prevents slipping
- No cooling water required, therefore less dirt

The Diamond Dry Hole Saw is a very versatile tool that can be used in a wide variety of designs for a wide variety of materials. In order to extend the service life of this hole saw and to determine the optimal speed and thus achieve optimal drilling results, the hole saws must be used correctly. It is not only the right hole saw that is important for the relevant material, but also the right speed. Too high or too low speeds when drilling the corresponding material can lead to excessive wear and poor drilling results. In this case, the teeth "slip" over the material and no longer grip properly. Here is an overview of the guide values

Technical data:
- Raw material: LDPE
- Thickness 0.2 mm = 200 mµ
- Density: approx. 0.9 g / cm³ - Tensile strength: approx. 10-25 N / mm² - Melting point: approx. 110 ° C - Temperature resistance: approx. -40 ° C / + 80 ° C
- Under tolerance: 30% +/- 5%

The Super-Bright Xenon Lamp bulb is Made in Germany, it was manufactured in our factory in southern Germany, Bavaria. At the factory there is a replacement light bulb secured under the battery spring of the flashlight.

The screw connections/assembled body components are equipped with a high-quality O-ring rubber seal and thus ensure splash water protection (IPX4).

The light focus/cone can be adjusted with just half a turn of the flashlight head.

The precision-engineered housing made of high-strength aluminum alloy is synonymous with quality and robustness and has a battery output voltage of 3 volts. The flashlight body is anodized both inside and outside, therefore offering better corrosion resistance and durability.

By removing the flashlight head, the flashlight can be converted into candlelight mode. The flashlight body can be placed in the opening of the flashlight head so that the system is hands-free in candle mode.

This MAGLITE® is equipped with a vented end cap (patented), reducing the risk of gas buildup. We use this to turn the flashlight on or off by turning the head.

This MAGLITE® flashlight was also designed, patented and manufactured in the U.S.A.

Scope of delivery:
- Presentation/gift box
- Mini Maglite® AA Xenon flashlight
- 1x replacement light bulb (under battery spring)
- 2x AA cell batteries
- Operation manual

The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. With a release accuracy of +/- 10%, the torque tool complies with EN ISO 6789 requirements. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.

1x easyTorque electric torque adapter (41344) , Nm: 2,8 , Tolerance: 10%
1x Bit slimBit electric (34589), Pozidriv PlusMinus: SL/PZ1, Bit length: 75
1x Bit slimBit electric (34590), Pozidriv PlusMinus: SL/PZ2, Bit length: 75
1x SoftFinish® electric screwdriver handle (S0283103)