• tool roll made of hard-wearing polyester fabric
• with practical, adjustable quick rel ease fastener
• Dimensions, open (L x H): 315 x 275 mm
• Four common Circlip Pliers for internal and external circlips

• Always to hand, always useful: Pliers Wrench XS and KNIPEX Cobra® XS in a practical belt pou ch
• Tool bag made from durable polyester fabric, with hook-and-loop fastener and belt clip
• Dimensions (W x H x D): 75 x 180 x 55 mm

• Practical dispenser box, stackable and reclosable
• handy, transparent dispenser box
• rotating lid with opening to remove individual wire ferrules
• with insulated wire ferr ules by DIN colour code
• Format: Ø 90 mm, height 44 mm
• 30 wire ferrules each for 0.25 / 0.34 / 0.5 / 0.75 / 1 mm²

• Universal Tweezers are suitable for demanding standard applications and precision tasks
• Wide range of designs: straight, angled, gripping surfaces and handles smooth or serrated, with needle points, narrow or blunt tips, as well as different lengths
• For the electronics indust ry, watchmakers and jewellers
• High-quality stainless steel: extremely tough and very good co rrosion resistance against a variety of atmospheric environments and many corrosive materials

Simplifies your work: Striking cap integrated into the handle allows you to strike and lift with the screwdriver.

Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Makes handling easier: Easy loosening of tight screws thanks to hex bolster for spanners.

Increases your safety: Anti-slip handle simplifies work in oily and wet application areas.

Product dimensions: 353 x 237 x 44 mm (LxWxD)

Application: Best suited for turning screws in wet and oily applications.

Oily or damp work environments pose a risk that a screwdriver handle provides little support and users are unable to apply higher torques. The MicroFinish screwdriver eliminates such problems thanks to its micro-fine surface and guarantees optimum grip. The solid steel cap on the handle end allows direct hammering - to loosen screws which are stuck, for example. The impact energy is transmitted without any losses due to the direct connection between the solid steel cap and blade. The hexagon head on the blade enables higher torques to be transferred using a screw wrench. Wiha screwdrivers also stand out due to their sophisticated handle size concept. The long, slender handle sizes can be used to fasten small screws quickly and firmly. There are also large handle sizes to fasten large screws which can be used to apply greater torques. The various handle sizes have also been matched to the consistently same-sized hand of screw-fastening professionals.

Content:

• 1x Screwdriver MicroFinish® Slotted with one-piece hexagonal blade and solid steel cap 5.5 mm x 100 mm (29134)
• 1x Screwdriver MicroFinish® Slotted with one-piece hexagonal blade and solid steel cap 6.5 mm x 125 mm (29135)
• 1x Screwdriver MicroFinish® Slotted with one-piece hexagonal blade and solid steel cap 8.0 mm x 150 mm (29136)
• 1x Screwdriver MicroFinish® Phillips with one-piece hexagonal blade and solid steel cap PH1 x 80 mm (29149)
• 1x Screwdriver MicroFinish® Phillips with one-piece hexagonal blade and solid steel cap PH2 x 100 mm (29150)

Product dimensions: 663 x 157 x 43 mm (LxWxD)

Application: Especially suited for cutting reinforcing steel mesh and Monier steel in the building trade

Application: For cutting cylindrical objects such as pins, wire, bolts and rivets, with a maximum hardness of 40 HRC

Design: Rugged and durable - inductive hardened blades to approx 60 HRC

Design: Convenient: adjustable via the excentric bolts

Design: Ergonomic: Precision tubular steel handles with rugged non-slip rubber grips

Design: Power - minimal effort when cutting due to the optimal geometry

Head shape: Bolted jaws, exchangeable

Material: Steel hard - jaws of hardened and tempered high-grade chrome molybdenum steel

Simplifies your work: The ball end facilitates access to screws and allows you to work at an angle of up to 25°.

Protects your health: Reduction of the risk of injury by increasing the hand working space.

Makes handling easier: Sliding function for one-handed opening of the holder and simple, quick removal.

Lowers your costs: Longer lifespan thanks to optimum corrosion protection and a perfect fit in the screw.

Product dimensions: 227 x 90 x 29 mm (LxWxD)

Application: Especially for hard-to-reach Torx screws and confined spaces.

Application: The Torx ball end enables fastening and unfastening at an angle of up to 25°.

Application: Reduction of the L-key head height of up to 15% improves access.

Application: Reduction of the risk of injury to the knuckles and fingertips thanks to a 95° bend of the L-key.

Supplementary information: TORX® ball end starting from size T9

Content:

• 1x L-keys TORX® ball end with short handle, titanium silver T5 x 72 mm (40966)
• 1x L-keys TORX® ball end with short handle, titanium silver T6 x 80 mm (40967)
• 1x L-keys TORX® ball end with short handle, titanium silver T7 x 89 mm (40968)
• 1x L-keys TORX® ball end with short handle, titanium silver T8 x 101 mm (40969)
• 1x L-keys TORX® ball end with short handle, titanium silver T9 x 111 mm (40970)
• 1x L-keys TORX® ball end with short handle, titanium silver T10 x 122 mm (40971)
• 1x L-keys TORX® ball end with short handle, titanium silver T15 x 136 mm (40972)
• 1x L-keys TORX® ball end with short handle, titanium silver T20 x 149 mm (40973)
• 1x L-keys TORX® ball end with short handle, titanium silver T25 x 164.5 mm (40974)
• 1x L-keys TORX® ball end with short handle, titanium silver T27 x 176 mm (40975)
• 1x L-keys TORX® ball end with short handle, titanium silver T30 x 191 mm (40976)
• 1x L-keys TORX® ball end with short handle, titanium silver T40 x 210 mm (40977)
• 1x L-keys TORX® ball end with short handle, titanium silver T45 x 232 mm (40978)
• 1x ProStar holder

Increases your flexibility: Variably adjustable right or left rotation through switching lever.

Simplifies your work: With a convenient foam insert for clearly structured storage.

Increases your efficiency: Fastening without interruption thanks to a finely toothed ratchet wrench.

Meets your requirements: Precise fitting, robust, and easy to clean.

Product dimensions: 295 x 200 x 40 mm (LxWxD)

Application: For installation and mounting work.

Tightening and loosening strongly tightened hex screws and nuts requires an enormous amount of force. With the nut driver inserts from Wiha the user can easily open any fastening. Every user is excellently equipped with the set consisting of the 18 most popular 3/8" nut driver inserts size 6-24 mm, a ratchet wrench, and three extensions. The included ratchet wrench combined with the selection of nut drivers gives users the required flexibility for their work. When working with the ratchet wrench, the user benefits from the fine toothing with 72 teeth, offering a short return angle. The right or left rotation can be variably adjusted by the integrated switching lever. The combination with the included extensions allow them to conveniently reach deep-set screws and nuts. The nut driver and extensions are mechanically locked. The change is initiated by pressing the activation button. Made of high quality chrome vanadium steel, the nut driver inserts are distinguished by their longevity and robustness, not the least thanks to their corrosion-resistant and easy to clean surface. The entire contents of the set are neatly and clearly stored in a foam insert in which markings help find the suitable nut driver.

Based on DIN 3120 / 3122 / 3124

Content:

• 1x 3/8" x 178 mm (33701)
• 1x Nut driver insert 3/8" double hex 6.0 mm x 28 mm (44690)
• 1x Nut driver insert 3/8" double hex 7.0 mm x 28 mm (44691)
• 1x Nut driver insert 3/8" double hex 8.0 mm x 28 mm (33723)
• 1x Nut driver insert 3/8" double hex 9.0 mm x 28 mm (44693)
• 1x Nut driver insert 3/8" double hex 10.0 mm x 28 mm (33725)
• 1x Nut driver insert 3/8" double hex 11.0 mm x 28 mm (33726)
• 1x Nut driver insert 3/8" double hex 12.0 mm x 28 mm (33727)
• 1x Nut driver insert 3/8" double hex 13.0 mm x 28 mm (33728)
• 1x Nut driver insert 3/8" double hex 14.0 mm x 28 mm (44698)
• 1x Nut driver insert 3/8" double hex 15.0 mm x 28 mm (44699)
• 1x Nut driver insert 3/8" double hex 16.0 mm x 28 mm (33731)
• 1x Nut driver insert 3/8" double hex 17.0 mm x 28 mm (33732)
• 1x Nut driver insert 3/8" double hex 18.0 mm x 28 mm (44702)
• 1x Nut driver insert 3/8" double hex 19.0 mm x 28 mm (33734)
• 1x Nut driver insert 3/8" double hex 20.0 mm x 30 mm (44704)
• 1x Nut driver insert 3/8" double hex 21.0 mm x 30 mm (33736)
• 1x Nut driver insert 3/8" double hex 22.0 mm x 30 mm (44706)
• 1x Extension 3/8" for nut driver inserts 75 mm (33703)
• 1x Extension 3/8" for nut driver inserts 150 mm (44688)
• 1x Extension 3/8" for nut driver inserts 250 mm (33705)
• 1x Foam insert