Basismaterial:
Rostfreier Stahl

Scharf, aber ungefährlich
Schauen Sie sich die Schneiden einmal ganz genau an. Etwas bemerkt? Sie sind nicht schräg geschliffen, sondern rechtwinklig. Deshalb können Sie sich selbst nicht damit schneiden - aber dafür die unterschiedlichsten Materialien.

Rostfreier Edelstahl
Damit Sie Ihre Schere dauerhaft nutzen können, bestehen die Metallteile aus rostfreiem Edelstahl. Im Griffbereich wird dieser von glasfaserverstärktem Kunststoff ummantelt. Ein weiterer Garant für ein langes Leben.

Angenehmes Arbeiten
Der Experte nennt sie „Augen" - die kleinen Öffnungen, in denen Ihre Finger sicheren Halt finden. Der Soft-Grip auf den Innenseiten trägt zusätzlich zu einem angenehmen und rutschfesten Arbeiten bei.

Kurze Schneide
In der Kürze liegt die: Präzision. So eignet sich das SECUMAX 363 besonders für exakte, filigrane Schnitte. Und auch wenn Sie in kleinsten Ecken schneiden wollen, kommt die Schere nicht von ihrer Linie ab.

Stabile Verbindung
Für Qualitätsscheren eine Selbstverständlichkeit: Beide Scherenhälften werden in der Mitte von einer echten Schraube zusammengehalten. Für eine stabile Verbindung und eine dauerhaft hohe Schneidleistung.

Hauptschneidmaterialien:
Karton: 1-lagig
Kunststoffumreifungen
Folien- und Papierbahnen
Textil
Garn, Schnur
Wickel-, Stretch-, Schrumpffolie

• cutting capacity up to 48 HRC hardness
• robust cutting edges are additionally inducti on-hardened, cutting edge hardness approx. 62 HRC
• forged-in stopper with comfortable shock- absorber
• good access due to very flat construction of head and joint area
• ergonomica lly angled handles to minimise effort
• sturdy non-slip two-colour multi-component handle slee ves
• precise adjustment (12 positions) by eccentric bolt
• high cutting performance wit h minimum effort due to optimum coordination of the cutting edge angle and transmission ratio
bolted cutter head, replaceable

Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.

Simplifies your work: Makes work easier, optimum impact effect and less effort needed.

Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.

Product dimensions: 375 x 165 x 60 mm (LxWxD)

Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.

Extra: With cast iron balls inside the hammer head for recoilless work.

Choosing the right hammer is particularly important on sensitive surfaces to prevent damage. With its steel tube handle, the no-recoil soft-faced hammer allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. Around 25% more hammer head mass ensures additional power. The yellow medium-hard hammer faces are ideal for universal use in areas such as tool and machine engineering as well as sheet metal and assembly work. The hammer is also impressive due to its steel tube handle with ergonomic, non-slip grip. Each hammer head is available individually as a spare part.

Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Saves time: Wiha MagicSpring® holding feature holds all Torx® screws in place without a magnet.

Product dimensions: 353 x 237 x 44 mm (LxWxD)

Application: For setting and tightening TORX® screws in difficult to access areas.

Content:

• 1x Screwdriver SoftFinish® TORX® MagicSpring® with round blade T10 x 80 mm (27740)
• 1x Screwdriver SoftFinish® TORX® MagicSpring® with round blade T15 x 80 mm (27741)
• 1x Screwdriver SoftFinish® TORX® MagicSpring® with round blade T20 x 100 mm (27742)
• 1x Screwdriver SoftFinish® TORX® MagicSpring® with round blade T25 x 100 mm (27743)
• 1x Screwdriver SoftFinish® TORX® MagicSpring® with round blade T30 x 115 mm (27744)
• 1x Screwdriver SoftFinish® TORX® MagicSpring® with round blade T40 x 130 mm (27745)

Product dimensions: 215 x 55 x 28 mm (LxWxD)

Application: For cutting copper and aluminum cables without crushing. Suitable for working on live parts up to 1,000 V AC.

Cutting without crushing of copper and aluminum cables

With switchable opening spring

Kind to hands and muscles

Safe operation up to 1,000 V AC

You want to have a clean cut when cutting cables to length? No problem with the cable cutter pliers from Wiha. They provide clean, smooth cutting to length of copper and aluminum cables without crushing, as well as the option of stripping and skinning. Its opening spring can be switched on and off, which allows the user to work effortlessly for long periods of time. The ergonomically shaped plier handle also ensures comfortable, fatigue-proof work. The high-quality chrome-plated plier surface additionally provides protection against rust, ensuring the pliers have a long service life. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life. The insulated cable cutter pliers are subject to routine testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.

VDE and GS tested

Manufactured acc. to IEC 60900.