Only for commercial customers.
Increases your efficiency: Braiding and cutting of binding wire in one work step.
Lowers your costs: Reduced wear due to induction hardened cutting-edge.
Product dimensions: 230 x 54 x 23 mm (LxWxD)
Application: For binding (plaiting) and cutting wire netting in reinforced concrete structures in a single operation.
Design: Low wear lap joint, riveted and able to withstand high levels of load.
Design: High quality cutting edge with high cutting performance and low application of force due to highly precise processing.
Design: Good durability due to additional induction hardening of cutting edges to approx. 64 HRC.
Head shape: Classic style.
Material: High quality C 70 tool steel, tempered.
DIN ISO 9242.
Product dimensions: 181 x 98 x 19 mm (LxWxD)
Important: TORX PLUS® keys cannot be used with TORX® screws.
Application: For high torque transfer with minimal effort.
Extra: The stronger profile of the TORX PLUS® tip allows up to 25% extra torque than the TORX® profile.
Extra: ChromTop® blade tip for the highest accuracy.
Handle: Wiha Classic T-handle.
Blade: Chrome-vanadium steel, through hardened, chrome-plated.
Product dimensions: 55 x 20 x 20 mm (LxWxD)
Drive: DIN 3120, ISO 1174, style A 6.3 + A 10.
Drive: With 1/4" hex shank according to DIN 3126 C 6.3.
Application: Universal application in metal, plastic and wood.
Bits: Reduced, over-tightened profile.
Extra: Particularly suitable for use in battery-powered drivers.
Extra: Guarantees outstanding removal of cuttings, no-rattle operation and smooth surface.
Material: High-quality HSS steel, ground.
Packaging: Blister packed.
DIN 3126, ISO 1173, Style C6,3
Increases your efficiency: Solve every fastening task with the Wiha nut driver range.
Product dimensions: 125 x 19 x 19 mm (LxWxD)
Application: For controlled turning of screws with bits at a prescribed torque.
Increases your efficiency: Solve every fastening task with the Wiha nut driver range.
Product dimensions: 125 x 19 x 19 mm (LxWxD)
Application: For controlled turning of screws with bits at a prescribed torque.
Simplifies your work: Striking cap integrated into the handle allows you to strike and lift with the screwdriver.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Increases your safety: Anti-slip handle simplifies work in oily and wet application areas.
Product dimensions: 238 x 36 x 36 mm (LxWxD)
Application: Best suited for turning screws in wet and oily applications.
Oily or damp work environments pose a risk that a screwdriver handle provides little support and users are unable to apply higher torques. The MicroFinish screwdriver eliminates such problems thanks to its micro-fine surface and guarantees optimum grip. The solid steel cap on the handle end allows direct hammering - to loosen screws which are stuck, for example. The impact energy is transmitted without any losses due to the direct connection between the solid steel cap and blade. The hexagon head on the blade enables higher torques to be transferred using a screw wrench. Wiha screwdrivers also stand out due to their sophisticated handle size concept. The long, slender handle sizes can be used to fasten small screws quickly and firmly. There are also large handle sizes to fasten large screws which can be used to apply greater torques. The various handle sizes have also been matched to the consistently same-sized hand of screw-fastening professionals.
Product dimensions: 130 x 50 x 40 mm (LxWxD)
Drive: DIN 3126, ISO 1173, style D 6.3.
Application: Eminently suitable for working in confined, hard-to-reach spaces.
Perfect for confined spaces
Compact and space-saving
Magnetic bit chuck
Convenient bit storage in the handle
The Stubby magazine bit holder contains bits in its handle. If you remove the cap on the end of the SoftFinish® multi-component handle, six 25 mm bits appear, designed for all standard screw fastenings. The magazine bit holder is thus flexible in its use and an attractive alternative to screwdriver sets, especially for portable use. The magnetic holding feature in the integrated bit holder ensures easy handling and an optimum grip. The practical, compact size sets the Stubby bit magazine apart as a specialized tool for working in highly confined spaces.
Content:
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T10 (01716)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T40 (01722)
Simplifies your work: Unrestricted access to low-lying screws thanks to bit holder lengths of up to 250mm.
Increases your efficiency: Unlimited access to deep-set screws thanks to extreme slimline design.
Product dimensions: 252 x 10 x 10 mm (LxWxD)
Standards: for bits DIN 3126, ISO 1173, shape C6.3
DIN 3126, ISO 1173, Style E6,3
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 287 x 79 x 31 mm (LxWxD)
Approved for 1,000 V AV
Safe transport and storage
Product dimensions: 89 x 43 x 20 mm (LxWxD)
Application: Particularly suitable for applications in confined working environments. Ideal for screw profiles (e.g. TORX) that tend to jam in the screw.
The Wiha CentroFix SuperSlim bit holder easily reaches low-lying screws thanks to its outer diameter, which has been reduced by up to 30% compared to conventional quick release holders. The bit is automatically locked mechanically and securely held when inserted. (SelfLock) When unlocked by actuating the sleeve, the bit moves directly into the ideal removal position. (EasyOut)