• precision pliers for very fine assembly and repair work in electronics
• for bending a nd cutting off wire ends on components
• sturdy, zero backlash box joint
• smooth ground gripping surfaces
• edges carefully deburred
• low-friction double spring for gentle an d even opening
• The mirror polish in combination with a fine oil film provides rust protectio n - no circuit faults caused by peeling chrome from plated tools
• to crunch and cut wire at 1 .6 mm length below the board

• with cutting edges for soft, hard and piano wire
• high cutting capacity with little e ffort due to optimum coordination of cutting edge angle and transmission ratio
• cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC

• for very tough, continuous use
• high cutting performance with minimum effort due to o ptimum coordination of the cutting edge angle and transmission ratio
• precision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire inclu ding piano wire
• pliers with tether attachment point for mounting a fall protection system

Meets your requirements: Robust and precise bits for general fastening in trade and industry.

Saves time: Simple and quick recognition of profile sizes thanks to contrasting laser marking.

Increases your efficiency: Best rotation characteristics for stable fastening processes.

Increases your efficiency: Optimum access to low-lying screws thanks to extra-long 127 mm bits.

Product dimensions: 127 x 7 x 6 mm (LxWxD)

Drive: DIN 3126, ISO 1173, style E 6.3.

Application: For all types of screw applications in trade and industry.

Extra: Overlength bits available in lengths of 50, 70, 90, 110, 127 and 150 mm.

Standards: DIN ISO 8764-1

Material: High grade chrome-vanadium steel, through hardened.

DIN 3126, ISO 1173, Style E6,3

Increases your efficiency: The multifunctional gripper adapts to fit every bolt or screw with outer profile.

Saves space: The gripper is the ideal space- and weight-saving alternative to a nut driver insert in mobile use.

Product dimensions: 130 x 72 x 28 mm (LxWxD)

Drive: DIN 3120, style C 10.

Application: The alternative to a nut driver insert when out on jobs. Ideal for fastening uncommon screw types such as hooks or eye bolts.

Extra: Enables a torque transmission of up to 80 Nm.

Extra: The Gripper also works on hooks or eyebolts.

Material: Housing made from alloyed steel. 54 spring-loaded hardened steel pins.

For all screws with external sizes up to 19 mm

Replaces 7-19 mm nut driver set

You won't get far with a standard nut driver insert when fastening or undoing uncommon screw types such as eye bolts. Wiha presents the optimum solution with its multi-functional nut driver insert gripper. Thanks to its 54 spring-loaded steel pins, the gripper adjusts to any nut with an external profile or any screw up to 8 mm high. Even uncommon profiles such as hooks or eye bolts do not present a problem for the gripper. It replaces nuts between 7 and 19 mm, regardless of whether dimensions are metric or imperial. Torques up to 80 Nm can also be applied. The nut driver insert fits on 3/8" square tool holders. Thanks to its compact size, the universal gripper provides a space- and weight-saving alternative to a nut driver insert, ideal for carrying around.

Increases your safety: Variably settable stabiliser arm.

Increases your efficiency: Unlimited access to hard-to-reach screws thanks to the 105°-angled tool head.

Product dimensions: 130 x 50 x 40 mm (LxWxD)

Application: Ideally suited for fastening screws in difficult to access areas, such as corners and edges.

Standards: Output drive: DIN 3126, ISO 1173, style C 6.3 and E 6.3

For manual operation to max. 14 Nm

12 adjustment options

Perfect for confined spaces

Magnetic 1/4" bit chuck

Fastening screws in difficult to access areas, such as corners and edges, is difficult and limiting for professional craftspeople. The offset screwdriver from Wiha offers a practical solution. Thanks to the 105° angled tool head, even difficult to access screws can be easily handled. The stabiliser arm can be variably adjusted. The offset screwdriver is ideally suited for bits according to DIN 3126, ISO 1173 style C 6.3 and E 6.3, which can be replaced quickly and easily using the magnetic bit holder. The manually operated lock sleeve ensures optimum grip of all 1/4" inserts such as bits, drills, and reamers. With a torque transfer of up to 14 Nm and its compact and slim design, the Wiha high-performance offset screwdriver perfectly supports a great variety of fastening tasks.

Drive: DIN 3126, ISO 1173, style C 6.3 Output drive: DIN 3126, ISO 1173, style C 6.3 and E 6.3