Only for commercial customers.
- high transmission ratio for easy cutting
- requires 50 % less effort compared with con ventional combination pliers due to optimised transmission ratio
- solid construction for heav iest strain
- universally applicable
- ergonomically optimised handle shape for firm co ntact to the hand and fatigue reducing operation
- particularly effective cross-hatched knurle d gripping zone in the jaws - for strong gripping and pulling
- additional gripping zone below the joint for powerful leverage and pressing performance
- with cutting edges for soft and ha rd wire
- cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC< /li>
- American style
- with fish tape puller in the joint gap
- with universal mandrel crimping point below the joint
- for powerful cutting of larger cross-sections as well as very hard materials
- two-han d operation for maximum cutting force
- 60% less effort required compared to conventional high -leverage diagonal cutters
- 40-fold increase of manual force due to special joint design
- With gripping surface below the joint for gripping and pulling wires from Ø 1.0 mm
- induc tion-hardened precision blades: cutting edge hardness approx. 64 HRC
- Straight cutting edges for easier cutting of flat material, also suitable for thin round material
- for the professional fixing of seat covers on profiled seats to the seat frame with all popu lar upholstery clips
- securely insert upholstery clips, guide and hold: the special groove f ixes the upholstery clips in the correct position
- easy positioning of the upholstery clips: a closing spring holds the pliers closed, the clip can be securely positioned and pressed
- us er-friendly operation thanks to multi-component grips
- upholstery clips can be easily pressed together due to a good transmission ratio of the pliers
- durable and strong
- Cut and chamfer all common domestic plastic drain pipes up to Ø 50 mm in a single operation< /li>
- Reversible high-quality ball-bearing steel blade, can be easily replaced without tools < li>Clean cut: no readjusting or deburring required, reducing potential blockages or damages of the s eals
- Cuts high temperature and other plastic pipes with Ø 32, 40 or 50 mm and wall thickness es up to 2.4 mm
- Optimal cutting due to slide-bearing and self-adjusting guide rolls
- Easy positioning due to clear view of cutting point
- Spring-loaded blade: no inconvenient rea djusting while cutting
- Exchangeable blade with two cutting edges can be reversed when showin g signs of wear
- Cuts lengths as small as 10 mm
- Housing made of glass fibre reinforce d plastic
- for data cables in telecommunication and networks
- For shielded and unshielded Wester n plugs RJ45 (8P8C)
- With adjustable retaining bracket, for all common RJ45 plugs with closed and non-closed housings
- Separate crimping die for strain relief (cable clip)
- Quick cutting and stripping of CAT-cables with high-quality blades
- Precise crimping process thanks to parallel crimping
- Repetitive, high crimping quality due to ratchet mechanism (unlockable )
- optimum transmission of force due to lever action for fatigue-reduced operation
- For reliable tool protection: holding capacity tested in numerous drop tests for tools up to 6 kg, even battery-operated tools
- Large working radius: long lanyard for convenient working
- Reduces the risks of tool loss, injury to living beings and damage to objects
- To me et regulations while working at heights, for example industrial climbing, arborists, rescue services , at sea, etc.
- Tether can be attached directly to the cord side or the carabiner to climbing equipment
- The roughly 90 cm long gathered fabric strap tether stretches to a length of abou t 1.5 m when weight is applied
- with strap made of a flat belt sewn to one end and a cord and cord stopper sewn into the other end, each sewn four times
- The additional loop on the lanya rd allows for direct connection of the tool to the climbing equipment with a carabiner (sold separat ely)
- Cord stopper made of solid aluminium, also available as a spare part
- For KNIPEX pliers with tether attachment point only with 1.5 kg adapter strap 00 50 02 T
- No PPE (perso nal protective equipment): not suitable for personal safety!
- Contents: lanyard 00 50 10 T, w ith fixed equipment carabiner 00 50 03 T
Meets your requirements: Blue hammer head / soft: e.g. for furniture work and interior decorating, minor assembly. Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 360 x 131 x 57 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer faces are eminently suitable for tool making and mechanical engineering, car repairs, and sheet metal and assembly work. Soft hammer faces for furniture manufacturing and interior fitting or minor assembly work.
Yellow hammer face (medium-hard) for tool manufacture / mechanical engineering, automobile sector, or sheet metal and assembly work
Blue hammer face (soft) for furniture manufacturing and interior fitting or minor assembly work
Recoiling impact effect minimizes the effort in a series of impacts
Protects the material being processed thanks to safety hammer faces
Hickory-wood handle and hammer faces available separately as spare parts
Depending on the site of operation, different hammer heads are needed to meet the specific requirements of various tasks. The recoilless, soft-faced hammer with hickory-wood handle makes it possible for the user to deliver measured positioning blows and protects delicate surfaces and edges due to its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. In addition, the approx. 25% greater mass of the hammer head ensures added power and easier work, optimum impact effect, and less effort needed as a result. The Safety Hammer is also distinguished by its high-grade hickory hammer handle with highly effective non-slip surface. The yellow, medium-hard hammer face with a diameter of 30 mm is ideal for universal use in areas like tool making and mechanical engineering as well as sheet metal and assembly work. The blue, soft hammer face also with a diameter of 30 mm is suitable for furniture manufacturing and interior fitting as well as minor assembly work. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.
GS tested.
Meets your requirements: Black hammer head / medium soft: e.g. for paving, tiling, dry wall construction. White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 360 x 131 x 57 mm (LxWxD)
GS tested.