• cuts finest strands as well as multi-core cables and piano wires
• Powerful, light and universal
• high cutting performance with minimum effort due to optimum coordination of the c utting edge angle and transmission ratio
• Box-joint design: highest stability with low weight
• doubly supported joint axis for heavy duty
• large opening width for thicker cables
• cuts precisely, even through fine copper wires
• compact, low-weight construction
< li>universally usable, in the assembly, maintenance and production
• 40% less force required c ompared with standard diagonal cutters of the same length
• Pliers with integrated, insulated tether attachment point for a tool tether

Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.

Simplifies your work: Makes work easier, optimum impact effect and less effort needed.

Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.

Product dimensions: 310 x 130 x 45 mm (LxWxD)

Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.

Extra: With cast iron balls inside the hammer head for recoilless work.

Choosing the right hammer is particularly important on sensitive surfaces to prevent damage. With its steel tube handle, the no-recoil soft-faced hammer allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. Around 25% more hammer head mass ensures additional power. The yellow medium-hard hammer faces are ideal for universal use in areas such as tool and machine engineering as well as sheet metal and assembly work. The hammer is also impressive due to its steel tube handle with ergonomic, non-slip grip. Each hammer head is available individually as a spare part.

Meets your requirements: White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.

Simplifies your work: Makes work easier, optimum impact effect and less effort needed.

Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.

Product dimensions: 360 x 131 x 57 mm (LxWxD)

Application: Building and construction industries, foundry, mould making, road work, forestry and agriculture, gardening and landscaping.

GS tested.

Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.

Product dimensions: 353 x 237 x 44 mm (LxWxD)

Application: For work in the area of live parts up to 1,000 V AC.

Extra: The integrated protective insulation enables low-lying fastening and spring elements to be reached and manipulated.

Blade: High quality chrome-vanadium-molybdenum steel, through hardened, black-finish.

Blade: Protective insulation moulded directly onto the blade and completely integrated into the blade in the lower area.

Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs

Wiha handle size concept - powerful and sensitive fastening

slimBits allow access to low-lying screws thanks to inserted insulation

Safe operation up to 1,000 V AC

Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish® screwdriver provides a remedy, ensuring optimal transmission of hand force. The long, slender handle sizes can be used to fasten small screws quickly and firmly. There are also large handle sizes to fasten large screws which can be used to apply greater torques. The various handle sizes have also been matched to the consistently same-sized hand of screw-fastening professionals. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. Protective insulation has been integrated into the blade with the Wiha slimTECHNOLOGY specially developed for electric applications, thus ensuring blades which are up to 33% slimmer. This means low-lying screw and spring elements can also be easily reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, as a result * providing users with a tool to work safely on live parts up to 1,000 V AC.

Manufactured acc. to IEC 60900.

Content:

• 1x Screwdriver SoftFinish® electric slimFix Slotted 3.5 mm x 100 mm (35446)
• 1x Screwdriver SoftFinish® electric slimFix Slotted 4.0 mm x 100 mm (35390)
• 1x Screwdriver SoftFinish® electric slimFix Slotted 5.5 mm x 125 mm (35391)
• 1x Screwdriver SoftFinish® electric slimFix Slotted 6.5 mm x 150 mm (10155)
• 1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ1 x 80 mm (35395)
• 1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ2 x 100 mm (35396)

Increases your efficiency: Optimised torsion zone for tough fastenings, e.g. in metal.

Increases your efficiency: All standard bits organised in a compact, space-saving design.

Makes handling easier: Bit ratchet for powerful fastening. Thanks to a switching angle of just 5°, also suitable for use in very confined spaces.

Saves time: Simple and quick recognition of profile sizes thanks to contrasting laser marking.

Saves time: The right bit, always at hand.

Product dimensions: 135 x 78 x 18 mm (LxWxD)

Housing: Contains 15 bits, bitholder and bit rachet.

Application: Universal assortment for all types of fastening in trade and industry.

Application: More applications with practical bit ratchet.

Bit holder: 1/4" universal holder, magnetic.

Bits: 25 mm Z and ZOT bits.

Extra: 1/4" universal holder can be used as an extension.

Housing: Box made of high quality plastic.

Geometry: Patented torsion zone to prevent premature breaking of the bit when under stress.

DIN 3126, ISO 1173, Style C6,3

Content:

• 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
• 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
• 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
• 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
• 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T10 (01716)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
• 1x Bit Standard 25 mm TORX® 1/4" C6,3 T40 (01722)
• 1x Bit Standard 25 mm Hexagon 1/4" C6,3 3.0 mm (01705)
• 1x Bit Standard 25 mm Hexagon 1/4" C6,3 4.0 mm (01706)
• 1x Bit Standard 25 mm Hexagon 1/4" C6,3 5.0 mm (01707)
• 1x Bit Standard 25 mm Hexagon 1/4" C6,3 6.0 mm (01708)
• 1x Bit holder magnetic 58 mm 1/4" (01895)
• 1x Bit ratchet 90 mm with thumb wheel Hexagon head, 1/4" (36931)
• 1x XLSelector

Increases your efficiency: The specialist with 120x greater lifespan* thanks to optimised bit for T-shaped screws(*compared to Wiha standard bit)

Lowers your costs: Bit quick and easy to find thanks to blue marking - even in dark environments by using an UV light.

Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan.

Product dimensions: 186 x 112 x 25 mm (LxWxD)

Application: Suitable for fastening metal screws. Also suitable for impact screwdrivers.

For Impact screw connections in metal

Work bench stand function

Patented bit technology for 120x increased service life

Easy to find in the dark with UV light

With 30 bits and bit holder

Until now, there was no clarity when buying bits as to which bits were suitable for which application. Wiha puts an end to the complexity of the combination of used tools, the specific fastening type and the wide selection of different bits. Thanks to Wiha's revolutionary bit concept, the screw shape is the only decisive factor when selecting the right bit. For example, the T bit is ideal for fastening T-shaped metal screws. Thanks to its patented extended torsion zone, this bit is also suitable for impact screwdrivers and has a 120x greater lifespan compared to Wiha standard bits. The colored bits are quick and easy to find. Thanks to their color coating, they are also readily spotted in the dark with a UV light. In this way, fewer bits are lost, thus saving you the expense of acquiring new ones. The bits in the most common drives are stored neatly and compactly away in the XLSelector, which additionally serves as a work bench stand.

DIN 3126, ISO 1173 style C 6.3

Content:

• 2x T-Bit 25 mm Phillips 1/4" PH1
• 4x T-Bit 25 mm Phillips 1/4"PH2
• 2x T-Bit 25 mm Phillips 1/4" PH3
• 2x T-Bit 25 mm TORX® 1/4" T10
• 2x T-Bit 25 mm TORX® 1/4" T15
• 4x T-Bit 25 mm TORX® 1/4" T20
• 2x T-Bit 25 mm TORX® 1/4" T25
• 2x T-Bit 25 mm TORX® 1/4" T30
• 2x T-Bit 25 mm TORX® 1/4" T40
• 2x T-Bit 25 mm Hexagon 1/4" 3,0
• 2x T-Bit 25 mm Hexagon 1/4" 4,0
• 2x T-Bit 25 mm Hexagon 1/4" 5,0
• 2x T-Bit 25 mm Hexagon 1/4" 6,0
• 1x Bit holder magnetic 58 mm 1/4" (01895)
• 1x XLSelector

Increases your efficiency: The specialist with 120x greater lifespan* thanks to optimised bit for Y-shaped screws(*compared to Wiha standard bit)

Lowers your costs: Bit quick and easy to find thanks to yellow marking - even in dark environments by using an UV light.

Saves time: No long searches thanks to fluorescent bit, infrequent bit replacement thanks to long lifespan.

Product dimensions: 186 x 112 x 25 mm (LxWxD)

Application: Suitable for fastening wood screws. Also suitable for impact screwdrivers.

For Impact screw connections in wood

Work bench stand function

Patented bit technology for 120x increased service life

Easy to find in the dark with UV light

With 30 bits and bit holder

Until now, there was no clarity when buying bits as to which bits were suitable for which application. Wiha puts an end to the complexity of the combination of used tools, the specific fastening type and the wide selection of different bits. Thanks to Wiha's revolutionary bit concept, the screw shape is the only decisive factor when selecting the right bit. For example, the Y bit is ideal for fastening Y-shaped wood screws. Thanks to its patented extended torsion zone, this bit is also suitable for impact screwdrivers and has a 120x greater lifespan compared to Wiha standard bits. The colored bits are quick and easy to find. Thanks to their color coating, they are also readily spotted in the dark with a UV light. In this way, fewer bits are lost, thus saving you the expense of acquiring new ones. The bits in the most common drives are stored neatly and compactly away in the XLSelector, which additionally serves as a work bench stand.

DIN 3126, ISO 1173 style C 6.3

Content:

• 1x Y-Bit 25 mm Phillips 1/4" PH1
• 4x Y-Bit 25 mm Phillips 1/4" PH2
• 1x Y-Bit 25 mm Phillips 1/4" PH3
• 2x Y-Bit 25 mm Pozidriv 1/4" PZ1
• 4x Y-Bit 25 mm Pozidriv 1/4" PZ2
• 2x Y-Bit 25 mm Pozidriv 1/4" PZ3
• 2x Y-Bit 25 mm TORX® 1/4" T10
• 3x Y-Bit 25 mm TORX® 1/4" T15
• 3x Y-Bit 25 mm TORX® 1/4" T20
• 3x Y-Bit 25 mm TORX® 1/4" T25
• 3x Y-Bit 25 mm TORX® 1/4" T30
• 2x Y-Bit 25 mm TORX® 1/4" T40
• 1x Bit holder magnetic 58 mm 1/4" (01895)
• 1x XLSelector

Simplifies your work: Larger handle - maximum power.

Lowers your costs: 26 tools in one.

Saves time: Searching? Never again - the most common bits in one tool.

Increases your efficiency: 90% less volume, 85% less weight - 100% efficiency!

Product dimensions: 280 x 110 x 40 mm (LxWxD)

Application: The compact alternative to a set of screwdrivers.

Large handle - maximum power

Clearly arranged and easy to remove

13 double bits = 26 profiles

Saves 90% of space

The Liftup 26one® magazine bit holder has 13 double bits: 12 in the magazine and 1 in the bit holder. Inside the bit holder, there is a two-row bit clip in a compartment design, which makes it easy to remove bits. Thanks to its narrow shape, the SuperSlim bit holder even provides access to screws in blind holes, for instance, where other, "thicker" bit holders have long failed. The sophisticated detail solutions offered by the LiftUp are certainly impressive - not to mention versatile. For example, the bit magazine on the handle end pops out at the touch of a button, ensuring bits are easy to remove. The soft zone of the ergonomically shaped SoftFinish® multi-component handle is made of skin-friendly special material. Coupled with its geometry that is easy on the hand and the large volume of the handle, it guarantees top torque values. Powerful screw fastening or loosening thus goes hand in hand. The LiftUp 26one® is only compatible with Wiha double bits.

Tool is compatible with Wiha double bits only.

Product dimensions: 100 x 58 x 23 mm (LxWxD)

Application: For illuminating dark work environments. Individually adjustable to different work requirements.

Boost function 800 lumen for better visibility

Flexible and efficient thanks to 5 illumination modes

Free hands thanks to magnetic holder and belt clip

Ultra-light and small - fits into every shirt and trousers pocket

Robust aluminum housing for high shock resistance

No electricity at the construction site? This is not an exceptional situation, but the everyday reality of professional craftspeople. This is where the rechargeable handlamp from Wiha comes to play, offering reliable illumination up to 800 lm independent of fixed electrical power supply sources. The handlamp is equipped with a powerful COB-LED, which can be set by the push of a button to 60 lm (1 second push in the OFF mode), 100 lm (1 push) or 500 lm (2 pushes). Maximum illumination is ensured by the boost mode with 800 lm (1 second in ON mode). In addition, there is an SMD-LED on the top side with 150 lm (3 pushes). The combination of both lamps offers diverse illumination options for a wide range of work requirements. The handlamp is also distinguished by its minimalist design, which means that it is so light and compact that it fits into every shirt or trousers pocket and is also ideally suited for working in confined spaces. Two strong magnets on the front and rear plus a belt clip offer various attachment options, keeping your hands free while working. Thanks to the sturdy aluminum housing, the compact high-luminosity handlamp is impact resistant (IK07) and splash-water proof (X5). The runtime is up to 11 h, subsequently the handlamp can be recharged with the included standard USB Type-C cable.