Only for commercial customers.
- For secure handling of electronic workparts: equalize differences in electrical potential be tween their user and the workpieces in a controlled manner
- ESD-tested, black epoxy resin coa ting with a surface resistance between 10^3 and 10^9 ohms
- For the electronics and precision engineering industries
- Antimagnetic to avoid electromagnetic damage
- Wide range of de signs: straight, angled, gripping surfaces and handles smooth or serrated, with needle points, narro w or blunt tips
- The high quality stainless steel ensures extreme toughness and very good cor rosion resistance against a variety of atmospheric environments and many corrosive materials
- Also available as a set (92 00 01 ESD)
- impact-resistant plastic case
- external dimensions: 345 x 80 x 280 mm (W x H x D)
- foam insert with recesses for tools, 2 crimping dies and 2 locators
- Clever stripping: large capacity range, sharply ground stripping profiles and intuitive posi tioning
- Innovative cutting geometry: easier cutting, especially of flat cables
- Hybri d design: as flat as needle-nose pliers, as wide as combination pliers for high stability with good accessibility
- Precisely ground stripping profiles for solid conductors from 0.75 - 6 mm² and fine-stranded conductors from 0.5 - 4 mm²
- Precise positioning of the wire thanks to locatio n ridges
- Easy cutting of copper and aluminium cables up to Ø 15 mm (1/2")
- Wide, cros s-hatched gripping surfaces for twisting wires
- Milled groove for secure holding and pulling of small work pieces such as nails
- Convex gripping surface on one side for secure gripping o f flat material and gripping area for round material
- Outer edges for deburring pipes
Makita
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Protects your health: No risk of injury, all blades stowed safely inside the handle.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Note: Not for use with bit styles C 6.3 and E 6.3.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to integrated insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button, making it easy to take out the bits. The time-tested ClicFix holder grips all bits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified to the international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clips thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling.
6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
- 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
Meets your requirements: Precision milled profile tips for a perfect fit - high-quality steel reduces wear and increases the lifetime.
Simplifies your work: Bulk pack with 100 bits in useful storage box.
Lowers your costs: High-contrast laser marking on the bit for easy identification of the profile size.
Application: Especially for professional needs.
Bits: 25 mm Standard bits.
Packaging: Practical cardboard box. Can be used as a dispenser in the workplace.
DIN 3126, ISO 1173, Style C6,3
Content:
- 100x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
Meets your requirements: Precision milled profile tips for a perfect fit - high-quality steel reduces wear and increases the lifetime.
Simplifies your work: Bulk pack with 100 bits in useful storage box.
Lowers your costs: High-contrast laser marking on the bit for easy identification of the profile size.
Application: Especially for professional needs.
Bits: 25 mm Standard bits.
Packaging: Practical cardboard box. Can be used as a dispenser in the workplace.
DIN 3126, ISO 1173, Style C6,3
Content:
- 100x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
Meets your requirements: Precision milled profile tips for a perfect fit - high-quality steel reduces wear and increases the lifetime.
Simplifies your work: Bulk pack with 100 bits in useful storage box.
Lowers your costs: High-contrast laser marking on the bit for easy identification of the profile size.
Application: Especially for professional needs.
Bits: 25 mm Standard bits.
Packaging: Practical cardboard box. Can be used as a dispenser in the workplace.
DIN 3126, ISO 1173, Style C6,3
Content:
- 100x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
Increases your efficiency: Perfect balance thanks to optimum weight distribution for effective handling.
Meets your requirements: Long-lasting and robust thanks to fibre-glass-reinforced plastic.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Lowers your costs: In case of misses, the full plastic casing protects the work pieces from damage.
Makes handling easier: Very tight, secure grip even with oily and wet hands thanks to the non-slip handle.
Application: For the controlled positioning and joining of work pieces.
The white hammer faces are ideal for metal processing, tool and mold construction, mounting and dismantling in the construction sector, as well as gardening and landscaping.
Well-balanced weight distribution
Durable and robust
Hammering with no recoil
Workpiece protection in case of failures
Optimal for oily/wet hands
Can be attached to a trap line
Especially on delicate surfaces, choosing the right hammer is crucial to avoid damage. The soft-faced hammer dead-blow allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. The special metal ball filling in the hammer head helps the soft-faced hammer to work completely without recoil and in a way' that is easy on the joints. Furthermore, the hammer impresses with its high-quality plastic fiberglass handle, which, in addition to its low weight, has an almost unbreakable robustness due to the hollow handle design and thus guarantees durability. The fully encased fibre-glass reinforced hammer handle made of polyamide ensures high protection against potential damage, should, for example metal parts come in contact with the processed work pieces. In addition, the powerful connection between the hammer head and handle ensures greatest safety while working and the shatter-proof nylon heads can be independently replaced at any time. The rubber coating of the ergonomically shaped multi-component handle ensures a tight and secure grip that guarantees full control even when used with oily or wet hands. The ergonomic handle design is easy on the joints with every movement. The impact protection integrated into the special design simultaneously safeguards the work piece as well as the hammer from damage.
GS standard acc. to DIN 5134