Only for commercial customers.
Product dimensions: 53 x 52 x 20 mm (LxWxD)
Application: For an absolutely flush cut of soft wires in the electronics industry.
Head shape: Wide, pointed head.
Material: C 70 special tool steel.
Delicate cutting of soft wires in the electronics sector
Absolutely flush cutting without exterior bevel
Kind to hands and muscles
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Protects your health: No risk of injury, all blades stowed safely inside the handle.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Product dimensions: 193 x 39 x 39 mm (LxWxD)
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to inserted insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
- 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
Meets your requirements: Precision milled profile tips for a perfect fit - high-quality steel reduces wear and increases the lifetime.
Simplifies your work: Bulk pack with 100 bits in useful storage box.
Lowers your costs: High-contrast laser marking on the bit for easy identification of the profile size.
Product dimensions: 126 x 50 x 50 mm (LxWxD)
Application: Especially for professional needs.
Bits: 25 mm Standard bits.
Packaging: Practical cardboard box. Can be used as a dispenser in the workplace.
DIN 3126, ISO 1173, Style C6,3
Content:
- 100x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
Meets your requirements: Precision milled profile tips for a perfect fit - high-quality steel reduces wear and increases the lifetime.
Simplifies your work: Bulk pack with 100 bits in useful storage box.
Lowers your costs: High-contrast laser marking on the bit for easy identification of the profile size.
Product dimensions: 126 x 50 x 49 mm (LxWxD)
Application: Especially for professional needs.
Bits: 25 mm Standard bits.
Packaging: Practical cardboard box. Can be used as a dispenser in the workplace.
DIN 3126, ISO 1173, Style C6,3
Content:
- 100x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
Meets your requirements: Precision milled profile tips for a perfect fit - high-quality steel reduces wear and increases the lifetime.
Simplifies your work: Bulk pack with 100 bits in useful storage box.
Lowers your costs: High-contrast laser marking on the bit for easy identification of the profile size.
Product dimensions: 126 x 50 x 49 mm (LxWxD)
Application: Especially for professional needs.
Bits: 25 mm Standard bits.
Packaging: Practical cardboard box. Can be used as a dispenser in the workplace.
DIN 3126, ISO 1173, Style C6,3
Content:
- 100x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
Increases your efficiency: Perfect balance thanks to optimum weight distribution for effective handling.
Meets your requirements: Long-lasting and robust thanks to fibre-glass-reinforced plastic.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Lowers your costs: In case of misses, the full plastic casing protects the work pieces from damage.
Makes handling easier: Very tight, secure grip even with oily and wet hands thanks to the non-slip handle.
Product dimensions: 375 x 170 x 50 mm (LxWxD)
Application: For the controlled positioning and joining of work pieces.
The white hammer faces are ideal for metal processing, tool and mold construction, mounting and dismantling in the construction sector, as well as gardening and landscaping.
Hammer faces for metal processing, tool and die making, assembly and dismantling work, or gardening and landscaping
Well-balanced weight distribution
Long-lasting and robust thanks to fiber-glass reinforced plastic
Hammering without recoil minimizes stress on joints, tendons, and muscles
Workpiece protection in case of misses thanks to an integrated impact shield
Optimum grip even when hands are oily / wet
Especially on delicate surfaces, choosing the right hammer is crucial to avoid damage. The soft-faced hammer dead-blow allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. The special metal ball filling in the hammer head helps the soft-faced hammer to work completely without recoil and in a way' that is easy on the joints. Furthermore, the hammer impresses with its high-quality plastic fiberglass handle, which, in addition to its low weight, has an almost unbreakable robustness due to the hollow handle design and thus guarantees durability. The fully encased fibre-glass reinforced hammer handle made of polyamide ensures high protection against potential damage, should, for example metal parts come in contact with the processed work pieces. In addition, the powerful connection between the hammer head and handle ensures greatest safety while working and the shatter-proof nylon heads can be independently replaced at any time. The rubber coating of the ergonomically shaped multi-component handle ensures a tight and secure grip that guarantees full control even when used with oily or wet hands. The ergonomic handle design is easy on the joints with every movement. The impact protection integrated into the special design simultaneously safeguards the work piece as well as the hammer from damage.
GS standard acc. to DIN 5134
Product dimensions: 260 x 129 x 104 mm (LxWxD)
Application: Allows user to apply high torques without tiring and undo and fasten rusted, glued or tightly fastened screws easily.
Ergonomic and powerful fastening
With extra side drive for maximum power transmission
In the convenient work bench stand
High-quality chrome-plated surface
The Wiha Comfort grip T-handle L-key with side drive is the tool to use when you need to apply high torques comfortably. Thanks to its ergonomic handle design with integrated soft zones, the T-handle is perfectly sized in the hand. Fewer pressure surfaces and less stress on muscles makes working with this tool a pleasure. Thanks to the one-piece blade, the integrated side drive is able to withstand maximum stress loads and enables users to undo and tighten screwed connections which have rusted, become stuck or fastened really tightly. The free hand resting on the handle ensures added stability, preventing the blade from slipping out of the screw head suddenly and thus protecting the screw and blade from damage. The through-hardened, matt chrome-plated chrome vanadium steel guarantees robustness and a long service life. The L-keys with T-handle are stored in a practical and robust metal workbench holder.
Content:
- 1x L-key with T-handle ComfortGrip TORX® with side drive, matt chrome-plated T10 (45446)
- 1x L-key with T-handle ComfortGrip TORX® with side drive, matt chrome-plated T15 (45447)
- 1x L-key with T-handle ComfortGrip TORX® with side drive, matt chrome-plated T30 (45451)
- 1x L-key with T-handle ComfortGrip TORX® with side drive, matt chrome-plated T25 (45449)
- 1x L-key with T-handle ComfortGrip TORX® with side drive, matt chrome-plated T40 (45452)
- 1x Workbench stand
