Only for commercial customers.
Das SECUMAX CARDYCUT in Weiß ist auch und besonders als individuell bedruckbares Werbemesser gefragt. Dank seiner kleinen kompakten Bauweise und der kurzen Nase können Sie es sehr leicht führen - etwa bei kurvigen Schnitten und in besonders schmalen Spalten. Als Spezialist für dünne, einlagige Folien kommt es z. B. häufig in der Automobilindustrie zum Einsatz.
- Basismaterial:
Kunststoff
- Sicherheit für alle(s)
Die eingespritzte und verdeckt liegende Klinge kommt weder Ihnen noch der Ware zu nah. Sprich: Sie schneiden nur das, was Sie wirklich schneiden wollen.
Einmalig gut
Das SECUMAX CARDYCUT ist ein Einwegmesser. Da Sie die Klinge nicht zu wechseln brauchen, können Sie auch nicht mit ihr in Berührung kommen. Auch das trägt zu Ihrer Sicherheit bei.
Klinge weit vorn
Das SECUMAX CARDYCUT kommt gleich zur Sache, da die Klinge sehr weit vorn beginnt. Der schmale Spalt zwischen Klinge und Kunststoff dient außerdem der Führung des Materials. Beides verbessert die Kontrolle beim Schneiden.
Kein Rost
Ihr Schneidwerkzeug ist mit einer rostfreien Qualitätsklinge ausgestattet. Die TiN-Beschichtung sorgt dafür, dass Sie mit Ihrem SECUMAX CARDYCUT länger leicht und effektiv schneiden können.
Bestens platziert
Das SECUMAX CARDYCUT geht Ihnen nicht so schnell verloren. Da das Sicherheitsmesser mit einer Öse ausgestattet ist, kann man es immer an einem sinnvollen Ort befestigen.
- Hauptschneidmaterialien:
Wickel-, Stretch-, Schrumpffolie
Klebeband
Folien- und Papierbahnen
Garn, Schnur
- Schneidanwendung:
Wickel- oder Stretchfolien schneiden
Folienbahnen schneiden
Papierbahnen schneiden
- for dismantling round cables exceeding Ø 25.0 mm
- removes all sheaths of standard cab les
- suitable for longitudinal and circular cutting
- cutting depth can be adjusted up to 5.0 mm
- replaceable blade (both sides can be used)
Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Product dimensions: 365 x 135 x 50 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.
Extra: With cast iron balls inside the hammer head for recoilless work.
Choosing the right hammer is particularly important on sensitive surfaces to prevent damage. With its steel tube handle, the no-recoil soft-faced hammer allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. Around 25% more hammer head mass ensures additional power. The yellow medium-hard hammer faces are ideal for universal use in areas such as tool and machine engineering as well as sheet metal and assembly work. The hammer is also impressive due to its steel tube handle with ergonomic, non-slip grip. Each hammer head is available individually as a spare part.
Simplifies your work: Self-locking at AF 17 and above.
Simplifies your work: Also suitable for left-handed users as operated without side push button.
Protects your health: Compaction and bending tasks take minimum effort thanks to manual force increased tenfold.
Lowers your costs: Minimises wear and prevents damage to sensitive surfaces thanks to smooth, parallel jaws and backlash-free handling.
Saves space: Replaces a set of metric and imperial open-ended spanners.
Saves time: Safe, rapid setting directly on the work piece with no need to press any buttons.
Saves time: Ratchet function allows users to fasten screws instantly with a simple glide.
Improved access: Slender design thanks to button-free setting enables it to be used in confined working environments, minimising the risk of damage.
Product dimensions: 300 x 100 x 32 mm (LxWxD)
Application: For working in confined spaces and on sensitive, treated surfaces, such as plumbing and heating fittings. Alternative to open-ended spanner set.
Damage-free installation, pressing, and bending thanks to smooth and parallel jaws
Ratchet principle for rapid screw fastening with a simple glide
Quick and easy adjustment of the gripping width
Secure hold on the workpiece thanks to self-clamping
Up to 10-fold hand reinforcement protects muscles and joints
It's difficult and impractical to press a button to adjust pliers when carrying out installation work in confined spaces. The Wiha pliers wrench sheds a light on such spots. Work is so much faster and easier when you set the required width across flats directly on the work piece without needing to press a button. Wear and damage to sensitive surfaces are minimised thanks to extremely smooth, parallel-acting jaws. Increased up to ten-fold, the manual force ensures compaction and bending tasks are significantly easier with strain consequently reduced on tendons and the muscular structure. The ratchet principle offers another advantage. The gripping jaw opening stroke makes screw fastening faster thanks to it simply slipping over. This means access to tight workspaces is improved noticeably. Other special features include self-locking from AF 17 and operation and use for both left- and right-handed people thanks to the button-free function.
Product dimensions: 231 x 80 x 25 mm (LxWxD)
Extra: Including 7 mm and 9 mm special sizes.
Extra: Thanks to its compact form the Wiha Compact holder fits perfectly into any folding rule pocket.
Supplementary information: Including 7 mm and 9 mm special sizes.
Blade: Chrome-vanadium steel, through hardened, nickel-plated.
Based on ISO 2936L.
Content:
- 1x L-keys Hexagon brilliant nickel-plated 1.5 mm x 91 mm (01201)
- 1x L-keys Hexagon brilliant nickel-plated 2.0 mm x 101 mm (01202)
- 1x L-keys Hexagon brilliant nickel-plated 2.5 mm x 113 mm (01203)
- 1x L-keys Hexagon brilliant nickel-plated 3.0 mm x 128 mm (01204)
- 1x L-keys Hexagon brilliant nickel-plated 4.0 mm x 142 mm (01206)
- 1x L-keys Hexagon brilliant nickel-plated 5.0 mm x 163 mm (01207)
- 1x L-keys Hexagon brilliant nickel-plated 6.0 mm x 184 mm (01208)
- 1x L-keys Hexagon brilliant nickel-plated 7.0 mm x 194 mm (01209)
- 1x L-keys Hexagon brilliant nickel-plated 8.0 mm x 206 mm (01210)
- 1x L-keys Hexagon brilliant nickel-plated 9.0 mm x 217 mm (36450)
- 1x L-keys Hexagon brilliant nickel-plated 10.0 mm x 231 mm (01211)
- 1x Compact holder
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Protects your health: No risk of injury, all blades stowed safely inside the handle.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Product dimensions: 193 x 39 x 39 mm (LxWxD)
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to inserted insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
- 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Protects your health: No risk of injury, all blades stowed safely inside the handle.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Product dimensions: 193 x 39 x 39 mm (LxWxD)
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to inserted insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit TORX® T8 x 75 mm (35506)
- 1x slimBit electric bit TORX® T9 x 75 mm (41160)
- 1x slimBit electric bit TORX® T10 x 75 mm (35507)
- 1x slimBit electric bit TORX® T15 x 75 mm (35508)
- 1x slimBit electric bit TORX® T20 x 75 mm (35509)
- 1x slimBit electric bit TORX® T25 x 75 mm (36071)
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Protects your health: No risk of injury, all blades stowed safely inside the handle.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Product dimensions: 193 x 39 x 39 mm (LxWxD)
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to inserted insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
- 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
Makes handling easier: Schuko socket with a flexible cable for easier access.
Simplifies your work: Easy error detection via LED display.
Product dimensions: 192 x 110 x 40 mm (LxWxD)
Application: For testing and error recognition of Schuko sockets, cable drums, and extension cables.
Measuring category: CAT II 300 V
Simple testing of Schuko sockets
CAT II, 300 V AC
Simple error recognition
30 cm cable for easy readout
LED display
Was the socket connected correctly? The socket tester from Wiha allows easy testing of Schuko sockets for correct wiring. Errors are clearly indicated by an LED display and allocated to the error source. Thanks to a flexible cable on the Schuko socket, the socket tester from Wiha can also be used in cramped work situations and allows easy reading of the measurement results at all times. In line with the measurement category CAT II up to 300 V, the socket tester from Wiha offers maximum security when working on electrical circuits.
IEC/EN 61010-1, IP40, CE