• attractive sales packaging with Euro standard perforation
• tools in a plastic deep-dr awn tray with transparent lid
• burnished tip, insulating multi-component handle, VDE-tested
• dimensions (W x H x D): 170 x 370 x 40 mm

• For particularly demanding precision work: made from high-quality, martensitic hardened stee l, tough and highly resistant to corrosion
• Stainless steel with a slim, tapered design for m aximum precision when cutting, dissecting and segmenting extremely small objects in tight spaces
• For the electronics industry, as well as repairs and handicrafts
• Mainly used for cuttin g soft copper, gold or silver wires, as well as magnetic wires
• With extremely hard and sharp oblique cutting nippers
• Also available as an ESD-version: with black epoxy resin coating an d a surface resistance between 10^3 and 10^9 ohms
• ESD version only: this allows to compansat e in a controlled manner the differences in potential between the operator and electronic components

Meets your requirements: Black hammer head / medium soft: e.g. for paving, tiling, dry wall construction. Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.

Simplifies your work: Makes work easier, optimum impact effect and less effort needed.

Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.

Product dimensions: 290 x 87 x 34 mm (LxWxD)

GS tested.

Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.

Protects your health: No risk of injury, *all bits stowed safely inside the handle.

Product dimensions: 283 x 50 x 40 mm (LxWxD)

Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.

Clearly arranged and easy to remove

Saves 75% of space

slimBits allow access to low-lying screws thanks to inserted insulation

Expandable and compatible with EVF products

Safe operation up to 1,000 V AC

The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.

Manufactured acc. to IEC 60900.

Content:

• 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
• 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
• 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
• 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
• 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
• 1x slimBit electric bit Phillips PH2 x 75 mm (34584)

Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.

Protects your health: No risk of injury, all blades stowed safely inside the handle.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.

Product dimensions: 283 x 50 x 40 mm (LxWxD)

Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.

Clearly arranged and easy to remove

Saves 75% of space

slimBits allow access to low-lying screws thanks to inserted insulation

Expandable and compatible with EVF products

Safe operation up to 1,000 V AC

The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.

Manufactured acc. to IEC 60900.

Content:

• 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
• 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
• 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
• 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
• 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
• 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)

Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.

Protects your health: No risk of injury, all blades stowed safely inside the handle.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.

Product dimensions: 283 x 50 x 40 mm (LxWxD)

Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.

Clearly arranged and easy to remove

Saves 75% of space

slimBits allow access to low-lying screws thanks to inserted insulation

Expandable and compatible with EVF products

Safe operation up to 1,000 V AC

The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.

Manufactured acc. to IEC 60900.

Content:

• 1x slimBit electric bit TORX® T8 x 75 mm (35506)
• 1x slimBit electric bit TORX® T9 x 75 mm (41160)
• 1x slimBit electric bit TORX® T10 x 75 mm (35507)
• 1x slimBit electric bit TORX® T15 x 75 mm (35508)
• 1x slimBit electric bit TORX® T20 x 75 mm (35509)
• 1x slimBit electric bit TORX® T25 x 75 mm (36071)

Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.

Protects your health: No risk of injury, all blades stowed safely inside the handle.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.

Product dimensions: 283 x 50 x 40 mm (LxWxD)

Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.

Clearly arranged and easy to remove

Saves 75% of space

slimBits allow access to low-lying screws thanks to inserted insulation

Expandable and compatible with EVF products

Safe operation up to 1,000 V AC

The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.

Manufactured acc. to IEC 60900.

Content:

• 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
• 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
• 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
• 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
• 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
• 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)

Simplifies your work: With a practical plastic holder to hang up or stand on a surface.

Increases your efficiency: Screwdriver handle size concept for optimal balance between precision and control.

Lowers your costs: Electrostatically conductive tools protect electronic components from damage.

Increases your efficiency: Careful workmanship and controlled power transmission thanks to the slim handle with soft grip.

Makes handling easier: Extra-long rotating cap ensures optimum feed.

Product dimensions: 285 x 155 x 32 mm (LxWxD)

Application: Ideal for fine and delicate fastening tasks on components at risk of electrostatic discharge.

The challenge when working on electronic components is that they can become damaged even at the lowest voltages. The electrostatically conductive fine screwdriver PicoFinish® ESD masters such tasks effortlessly. Thanks to their long, slim handles and quick-turning zone, these fine screwdrivers are ideal for careful, precise work practices on delicate workpieces. Their ergonomic handle design with soft zone makes them comfortable to use. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. The printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile. The dissipative tool safely channels electrostatic energy away in a controlled fashion. The ESD fine screwdrivers are manufactured in compliance with international IEC standard 61340-5-1, thus guaranteeing maximum protection for electronic components. These screwdrivers have a surface resistance between 10 - 10 ohm.

Content:

• 1x Fine screwdriver PicoFinish® ESD TORX® T5 x 40 mm (43698)
• 1x Fine screwdriver PicoFinish® ESD TORX® T6 x 40 mm (43699)
• 1x Fine screwdriver PicoFinish® ESD TORX® T7 x 40 mm (43700)
• 1x Fine screwdriver PicoFinish® ESD TORX® T8 x 40 mm (43701)
• 1x Fine screwdriver PicoFinish® ESD TORX® T10 x 50 mm (43703)
• 1x Fine screwdriver PicoFinish® ESD TORX® T15 x 60 mm (43704)
• 1x holder

Simplifies your work: The ball end facilitates access to screws and allows you to work at an angle of up to 25°.

Makes handling easier: Always the correct key when you need it.

Saves time: Ensures order: removal and targeted insertion in the holder is child's play.

Product dimensions: 342 x 130 x 45 mm (LxWxD)

Application: Suitable for fastening and loosening TORX® screws in difficult-to-access spots.

Supplementary information: TORX® ball end starting from size T9

Quick removal: turn the L-key and pull it out

Perfect for confined spaces thanks to ball end

It's a common experience. It is not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates the bother in an ingenious way. Turning one L-key in the holder makes all the other keys turn to the side at the same angle, allowing you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. Moreover, the L-keys with ball end (from size T9) ensure that removing sunken screws or inserting and fastening a screw at an angle down to 25° is an extremely simple task. This enables users to work in areas that are particularly difficult to access. The set contains thirteen black-oxidised TORX® L-keys in standard sizes. The L-key set can be hung up directly at the workplace using the suspension bracket on the holder.

Content:

• 1x L-keys TORX®, black oxidised T5 x 72 mm (24313)
• 1x L-keys TORX®, black oxidised T6 x 80 mm (24314)
• 1x L-keys TORX®, black oxidised T7 x 88 mm (24315)
• 1x L-keys TORX®, black oxidised T8 x 101 mm (24316)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T9 x 111 mm (32386)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T10 x 121 mm (32387)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T15 x 136 mm (32388)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T20 x 148 mm (32389)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T25 x 163 mm (32390)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T27 x 176 mm (32391)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T30 x 191 mm (32392)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T40 x 210 mm (32393)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T45 x 232 mm (10380)
• 1x ErgoStar holder