Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
max. 8 compartment inserts (2 layers) for box p/n. 4001-280/6/4
You can also combine the compartments with p/n. 4001-8 or 4001-16.
Impregnated non-woven cloth, 100 pcs. For desinfection of plastic and metal surfaces. For desinfection allow at least 1 minute. Reg.Nr. N-87539.
- load connection with vibration alert
- intentional tripping of a 30 mA RCD
- phase sequence test in a three-phase mains
- single-pole external conductor test (phase)
- acoustic continuity test with loud test buzzer and visual indication by means od yellow LED
- measuring point illumination by means of white high-power LED
- phase sequence test by means of green LED (left/right)
- detector for non-contact localization of cable breaks on exposed and live lines
- True RMS measuring method
- low-volt range: 1.0 V to 11.9 V
- frequency indication up to 1000 Hz
- resistance measurement up to 300 kOhms
- conducting-state voltage measurement of diodes
- automatic LC display illumination by means of a light sensor
Technical data:
indication: LED/LCD (illuminated)
indication steps: 1.0 - 1000 V AC/ 1200 V DC
frequency range: 1 - 1000 Hz
acoustic and visual continuity test: buzzer + yellow LED 0 - 100 kOhms
diode test: 0.3 - 2.0 V
resistance measuring range: 0.1 kOhm - 300 kOhms
phase-sequence test: green LEDs (right/left)
single pole outer conductor test: red lightning LED
polarity test: LCD (+/-)
cable break detector: yellow LED (flashing)
load connection via push button: Is = 550 mA (1000V) 30 mA RCD trip
vibrating alarm: yes
measuring point illumination: white LED
protection class: IP 65
Measurement of air velocity, temperature, and volume flow. Combined with a smartphone or tablet, the testo 405i thermal anemometer becomes a compact measuring instrument for air velocities, temperatures, and volume flows. Equipped with a telescopic shaft that extends up to 400 mm, it allows for flexible use in rooms and ducts. Using the testo Smart Probes App installed on their mobile device, users can conveniently read measurements, quickly and easily configure volume flow measurements, and reliably determine timed and multi-point averages. Finally, measurement data reports can be sent directly as PDF or Excel files. When used in conjunction with the testo 605i thermo-hygrometer, the testo 405i is also suitable for determining cooling and heating output.
Technical data:
Wind velocity resolution: 0.01 m/s
Height: 41 mm
Width: 30 mm
Temperature measurement range: -20 to +60°C
Length (depth): 200 mm
Temperature measurement range (max.): +60°C
Wind velocity measurement range (min.): 0 m/s
Wind velocity measurement range (max.): 30 m/s
Temperature measurement range (min.): -20°C
Varta
Wera
Wiha