Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Makita
Wallbox tester and measuring adapter for simple troubleshooting or standard-compliant testing on 1- and 3-phase EV charging stations
The BENNING EV 3-3 can be used on its own for functional testing and troubleshooting of e-charging stations. In conjunction with a suitable installation test device, the effectiveness of the protective measures can also be demonstrated in accordance with the standard.
- 4 mm sockets for easy connection to the installation test device
- Voltage measurement and rotary field test
- Analysis of the CP and PP signals
- Activation of the residual current devices with time measurement
- CP and PE fault simulation
Application:
The BENNING EV 3-3 wallbox tester and measuring adapter enables simple and quick functional testing and troubleshooting of wallboxes. Together with the BENNING IT 200 / IT 130, it also enables the safety and functional testing of charging stations for electric vehicles in accordance with DIN VDE 0100-600 (IEC 60364-6) and DIN VDE 0105-100 (EN 50110).
Features:
- Simulation of vehicle status A, B, C, D
- Analysis of the CP and PP signals (vehicle status, signal voltage, frequency, duty cycle)
- PE test
- Triggering of the 30 mA AC and 6 mA DC
residual current devices with time measurement - Rotary field measurement
- Voltage measurement
- Simulation of the errors, short circuit between CP-PE / PE separately
- Input voltage: 1-phase: Up to 300 V / 3-phase: Up to 510 V
- Maximum test current: 10 A
- Protection class II (double insulation)
- Degree of pollution: 2
- Protection type: IP 40
- Overvoltage category: CAT II 300 V against earth
- Operating temperature: 0 to 40°C
- Standard compliant with: IEC / DIN EN 61010-1 (VDE 0411-1)
IEC / DIN EN 61010-2-30 (VDE 0411-2-030)
Scope of delivery:
Measuring adapter, protective bag, operating instructions
Wiederaufladbare Leuchte mit Fokussierfunktion (Advanced Focus System) und drei Helligkeitsstufen
Dual Power Source: Betrieb per Akku oder Batterie möglich, wiederaufladbar per USB-C am Akku (Ladekabel nicht enthalten)
Unkomplizierte Bedienung per Endkappenschalter
Nachhaltig: Einsatz von 75 % recyceltem Aluminium9 sowie 7 Jahre Garantie (bei Registrierung)*
CRI 70
Lichtquellen Farbtemperatur 6000-7500
High Power: 200lm, 130m Weite, 1.5h Laufzeit.
Mid power: 80lm, 80m Weite, 2.5h Laufzeit.
Low power: 20lm, 40m Weite, 8h Laufzeit.
Akku im Lieferumfang enthalten.
