Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Part list
Profit
Diamond drill bits for granite, hard stone, tiles and porcelain stoneware - depth of cut 35 mm
- from 18 mm equipped with Click & Drill system
- no angle grinder required, just a drill
- precise positioning, center drill prevents slipping
- No cooling water required, therefore less dirt
The Diamond Dry Hole Saw is a very versatile tool that can be used in a wide variety of designs for a wide variety of materials. In order to extend the service life of this hole saw and to determine the optimal speed and thus achieve optimal drilling results, the hole saws must be used correctly. It is not only the right hole saw that is important for the relevant material, but also the right speed. Too high or too low speeds when drilling the corresponding material can lead to excessive wear and poor drilling results. In this case, the teeth "slip" over the material and no longer grip properly. Here is an overview of the guide values
Technical data:
- Raw material: LDPE
- Thickness 0.2 mm = 200 mµ
- Density: approx. 0.9 g / cm³ - Tensile strength: approx. 10-25 N / mm² - Melting point: approx. 110 ° C - Temperature resistance: approx. -40 ° C / + 80 ° C
- Under tolerance: 30% +/- 5%
Part list
Part list
Special price til 31.03.2015, then again EUR 58,70!!
Part list
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. With a release accuracy of +/- 10%, the torque tool complies with EN ISO 6789 requirements. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
1x easyTorque electric torque adapter (41344) , Nm: 2,8 , Tolerance: 10%
1x Bit slimBit electric (34589), Pozidriv PlusMinus: SL/PZ1, Bit length: 75
1x Bit slimBit electric (34590), Pozidriv PlusMinus: SL/PZ2, Bit length: 75
1x SoftFinish® electric screwdriver handle (S0283103)
