Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- For reliable tool protection: holding capacity tested in numerous drop tests for tools up to 6 kg, even battery-operated tools
- Large working radius: long lanyard for convenient working
- Reduces the risks of tool loss, injury to living beings and damage to objects
- To me et regulations while working at heights, for example industrial climbing, arborists, rescue services , at sea, etc.
- Tether can be attached directly to the cord side or the carabiner to climbing equipment
- The roughly 90 cm long gathered fabric strap tether stretches to a length of abou t 1.5 m when weight is applied
- with strap made of a flat belt sewn to one end and a cord and cord stopper sewn into the other end, each sewn four times
- The additional loop on the lanya rd allows for direct connection of the tool to the climbing equipment with a carabiner (sold separat ely)
- Cord stopper made of solid aluminium, also available as a spare part
- For KNIPEX pliers with tether attachment point only with 1.5 kg adapter strap 00 50 02 T
- No PPE (perso nal protective equipment): not suitable for personal safety!
- for fitting retaining rings and circlips without grip holes
- for shaft retaining devi ces
- with pressure spring
- for retaining rings with a minimum ring split gap of 3.6 mm
Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.
Increases your efficiency: A secure, non-slip grip in all standard work situations.
Protects your health: Special DynamicJoint® design reduces effort required for cutting.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 230 x 62 x 31 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.
Standards: DIN ISO 5746.
Manufactured acc. to IEC 60900.
Simplifies your work: Ideal for fine gripping and bending work in electronics.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Product dimensions: 119 x 111 x 18 mm (LxWxD)
Application: Mainly for precision gripping and bending work.
Standards: DIN ISO 9655.
IEC 61340-5-1.
Increases your efficiency: Extra-long plier head for inserting low-lying components.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Product dimensions: 270 x 100 x 39 mm (LxWxD)
Application: For all fitting, gripping and adjustment tasks, as well as cutting to length of live parts up to 1,000 V AC.
Standards: DIN ISO 5745.
Cutting, bending, gripping - also in difficult-to-access spots
Kind to hands and muscles
Safe operation up to 1,000 V AC
Often, thick wires must be securely held and shaped at the same time, which requires a high bending force. The needle nose pliers from Wiha are the solution for all fitting, gripping and adjustment tasks. The toothed gripping surface ensures that all components, wires or cables can be easily and comfortably held in place. In addition, the long, pointed and flat rounded jaws that are angled at 40°allow the secure insertion of low-lying components. What's more, the cutting edges located behind them allow cutting soft, medium-hard and hard wires to length. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life. The insulated needle nose pliers are subject to routine testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Product dimensions: 146 x 29 x 29 mm (LxWxD)
Application: For working on electrostatically sensitive components.
Application: With integrated CentroFix bit holder, suitable for all bits and bit drills with the style C 6.3, E 6.3 or double bits.
Bit chuck: Stainless steel.
Extra: True single-handed operation, extremely high retention force of bits (up to 20 kg) and virtually no play between bit and holder thanks to special closing and holding mechanism.
Supplementary information: Handle: IEC 61340-5-1
Handle: Surface resistance 10^6 - 10^9 ohms.
Standards: for bits DIN 3126, ISO 1173, form C6.3 and E6.3
Lowers your costs: Prevents damage caused by lost circlips in the work area.
Saves time: Safe and sturdy grip on circlips.
Product dimensions: 306 x 64 x 16 mm (LxWxD)
Application: For inserting / removing circlips from inside bores.
Supplementary information: with safety latching function MagicTips®
DIN ISO 5256.