Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
- very precisely ground and sharp cutting edg es with very small bevels for exact cutting on delicate electronic components
- also availabl e without bevel for flush cutting
- precision cutting edges additionally induction-hardened, c utting edge hardness approx. 64 HRC
- approx. 20% lighter than conventional electronics pliers
- bolted joint with carefully manufactured joint surfaces for even, low-friction movement thr oughout the entire opening range
- smooth-running double spring for a gentle and even opening< /li>
- ergonomically optimised multi-component handles
- pointed head
- with precision cutting edges for soft, hard and piano wire
- cuts bolts, nails, rivets , etc. up to Ø 5.2 mm
- efficient joint design ensures exceptional cutting performance with li ttle effort
- cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC
- with slim multi-component grips without collar for better handling and easier transport< /li>
- Opening spring and locking device are integrated in the handles for comfortable work and saf e transport
- Wire stripper with cable shears - two essential electrical installation tools in one pair of pliers
- Integrated cable shears for the clean cutting of Cu- and Al-cables without crushing up to Ø 15 mm (5 x 2,5 mm²)
- cutting edges additionally induction-hardened, cutting edge hard ness approx. 57 HRC
- Universal adjustment of the stripping blades by means of a knurled screw
- slim dimensions for easy access
- Stripping of single-, multi- and fine stranded cond uctors with plastic or rubber insulation up to Ø 5 mm or 10 mm² cross-section
- Graduated jaw provides a visual orientation aid when stripping wire in standard lengths (11 mm and 16 mm)
- impact-resistant plastic case
- external dimensions: 345 x 80 x 280 mm (W x H x D)
- foam insert with recesses for tools, 2 crimping dies and 2 locators
- Clever stripping: large capacity range, sharply ground stripping profiles and intuitive posi tioning
- Innovative cutting geometry: easier cutting, especially of flat cables
- Hybri d design: as flat as needle-nose pliers, as wide as combination pliers for high stability with good accessibility
- Precisely ground stripping profiles for solid conductors from 0.75 - 6 mm² and fine-stranded conductors from 0.5 - 4 mm²
- Precise positioning of the wire thanks to locatio n ridges
- Easy cutting of copper and aluminium cables up to Ø 15 mm (1/2")
- Wide, cros s-hatched gripping surfaces for twisting wires
- Milled groove for secure holding and pulling of small work pieces such as nails
- Convex gripping surface on one side for secure gripping o f flat material and gripping area for round material
- Outer edges for deburring pipes
Meets your requirements: Blue hammer head / soft: e.g. for furniture work and interior decorating, minor assembly. Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 400 x 150 x 69 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer faces are eminently suitable for tool making and mechanical engineering, car repairs, and sheet metal and assembly work. Soft hammer faces for furniture manufacturing and interior fitting or minor assembly work.
Yellow hammer face (medium-hard) for tool manufacture / mechanical engineering, automobile sector, or sheet metal and assembly work
Blue hammer face (soft) for furniture manufacturing and interior fitting or minor assembly work
Recoiling impact effect minimizes the effort in a series of impacts
Protects the material being processed thanks to safety hammer faces
Hickory-wood handle and hammer faces available separately as spare parts
Depending on the site of operation, different hammer heads are needed to meet the specific requirements of various tasks. The recoilless, soft-faced hammer with hickory-wood handle makes it possible for the user to deliver measured positioning blows and protects delicate surfaces and edges due to its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. In addition, the approx. 25% greater mass of the hammer head ensures added power and easier work, optimum impact effect, and less effort needed as a result. The Safety Hammer is also distinguished by its high-grade hickory hammer handle with highly effective non-slip surface. The yellow, medium-hard hammer face with a diameter of 30 mm is ideal for universal use in areas like tool making and mechanical engineering as well as sheet metal and assembly work. The blue, soft hammer face also with a diameter of 30 mm is suitable for furniture manufacturing and interior fitting as well as minor assembly work. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.
GS tested.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Product dimensions: 187 x 35 x 34 mm (LxWxD)
Application: Safe installation of terminals and sleeves, conductor connections and fastening of conductor lines. For working on live parts up to 1,000 V AC.
Bit chuck: Insulated metal bit holder holds all slimBits reliability.
Bit chuck: Only for 6 mm slimBits.
Bits: Protective insulation moulded directly onto the bit and completely integrated into the bit in the lower area.
Extra: Individually tested protective insulation 1,000 V AC, VDE and GS tested.
Only compatible with Wiha torque screwdrivers TorqueVario®-S electric (series 2872).
Manufactured acc. to IEC 60900.
Content:
- 1x Adapter TorqueVario-S electric for slimBits 6.0 mm (35870)
- 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
- 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
Simplifies your work: Self-locking at AF 17 and above.
Simplifies your work: Also suitable for left-handed users as operated without side push button.
Protects your health: Compaction and bending tasks take minimum effort thanks to manual force increased tenfold.
Lowers your costs: Minimises wear and prevents damage to sensitive surfaces thanks to smooth, parallel jaws and backlash-free handling.
Saves space: Replaces a set of metric and imperial open-ended spanners.
Saves time: Safe, rapid setting directly on the work piece with no need to press any buttons.
Saves time: Ratchet function allows users to fasten screws instantly with a simple glide.
Improved access: Slender design thanks to button-free setting enables it to be used in confined working environments, minimising the risk of damage.
Product dimensions: 262 x 65 x 18 mm (LxWxD)
Application: For working in confined spaces and on sensitive, treated surfaces, such as plumbing and heating fittings. Alternative to open-ended spanner set.
Damage-free installation, pressing, and bending thanks to smooth and parallel jaws
Ratchet principle for rapid screw fastening with a simple glide
Quick and easy adjustment of the gripping width
Secure hold on the workpiece thanks to self-clamping
Up to 10-fold hand reinforcement protects muscles and joints
It's difficult and impractical to press a button to adjust pliers when carrying out installation work in confined spaces. The Wiha pliers wrench sheds a light on such spots. Work is so much faster and easier when you set the required width across flats directly on the work piece without needing to press a button. Wear and damage to sensitive surfaces are minimised thanks to extremely smooth, parallel-acting jaws. Increased up to ten-fold, the manual force ensures compaction and bending tasks are significantly easier with strain consequently reduced on tendons and the muscular structure. The ratchet principle offers another advantage. The gripping jaw opening stroke makes screw fastening faster thanks to it simply slipping over. This means access to tight workspaces is improved noticeably. Other special features include self-locking from AF 17 and operation and use for both left- and right-handed people thanks to the button-free function.
