Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.

Protects your health: No risk of injury, all blades stowed safely inside the handle.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.

Product dimensions: 283 x 50 x 40 mm (LxWxD)

Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.

Clearly arranged and easy to remove

Saves 75% of space

slimBits allow access to low-lying screws thanks to inserted insulation

Expandable and compatible with EVF products

Safe operation up to 1,000 V AC

The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.

Manufactured acc. to IEC 60900.

Content:

• 1x slimBit electric bit TORX® T8 x 75 mm (35506)
• 1x slimBit electric bit TORX® T9 x 75 mm (41160)
• 1x slimBit electric bit TORX® T10 x 75 mm (35507)
• 1x slimBit electric bit TORX® T15 x 75 mm (35508)
• 1x slimBit electric bit TORX® T20 x 75 mm (35509)
• 1x slimBit electric bit TORX® T25 x 75 mm (36071)

Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.

Protects your health: No risk of injury, all blades stowed safely inside the handle.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.

Product dimensions: 283 x 50 x 40 mm (LxWxD)

Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.

Clearly arranged and easy to remove

Saves 75% of space

slimBits allow access to low-lying screws thanks to inserted insulation

Expandable and compatible with EVF products

Safe operation up to 1,000 V AC

The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.

Manufactured acc. to IEC 60900.

Content:

• 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
• 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
• 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
• 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
• 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
• 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)

Simplifies your work: With a practical plastic holder to hang up or stand on a surface.

Increases your efficiency: Screwdriver handle size concept for optimal balance between precision and control.

Lowers your costs: Electrostatically conductive tools protect electronic components from damage.

Increases your efficiency: Careful workmanship and controlled power transmission thanks to the slim handle with soft grip.

Makes handling easier: Extra-long rotating cap ensures optimum feed.

Product dimensions: 285 x 155 x 32 mm (LxWxD)

Application: Ideal for fine and delicate fastening tasks on components at risk of electrostatic discharge.

The challenge when working on electronic components is that they can become damaged even at the lowest voltages. The electrostatically conductive fine screwdriver PicoFinish® ESD masters such tasks effortlessly. Thanks to their long, slim handles and quick-turning zone, these fine screwdrivers are ideal for careful, precise work practices on delicate workpieces. Their ergonomic handle design with soft zone makes them comfortable to use. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. The printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile. The dissipative tool safely channels electrostatic energy away in a controlled fashion. The ESD fine screwdrivers are manufactured in compliance with international IEC standard 61340-5-1, thus guaranteeing maximum protection for electronic components. These screwdrivers have a surface resistance between 10 - 10 ohm.

Content:

• 1x Fine screwdriver PicoFinish® ESD TORX® T5 x 40 mm (43698)
• 1x Fine screwdriver PicoFinish® ESD TORX® T6 x 40 mm (43699)
• 1x Fine screwdriver PicoFinish® ESD TORX® T7 x 40 mm (43700)
• 1x Fine screwdriver PicoFinish® ESD TORX® T8 x 40 mm (43701)
• 1x Fine screwdriver PicoFinish® ESD TORX® T10 x 50 mm (43703)
• 1x Fine screwdriver PicoFinish® ESD TORX® T15 x 60 mm (43704)
• 1x holder

Simplifies your work: The ball end facilitates access to screws and allows you to work at an angle of up to 25°.

Makes handling easier: Always the correct key when you need it.

Saves time: Ensures order: removal and targeted insertion in the holder is child's play.

Product dimensions: 342 x 130 x 45 mm (LxWxD)

Application: Suitable for fastening and loosening TORX® screws in difficult-to-access spots.

Supplementary information: TORX® ball end starting from size T9

Quick removal: turn the L-key and pull it out

Perfect for confined spaces thanks to ball end

It's a common experience. It is not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates the bother in an ingenious way. Turning one L-key in the holder makes all the other keys turn to the side at the same angle, allowing you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. Moreover, the L-keys with ball end (from size T9) ensure that removing sunken screws or inserting and fastening a screw at an angle down to 25° is an extremely simple task. This enables users to work in areas that are particularly difficult to access. The set contains thirteen black-oxidised TORX® L-keys in standard sizes. The L-key set can be hung up directly at the workplace using the suspension bracket on the holder.

Content:

• 1x L-keys TORX®, black oxidised T5 x 72 mm (24313)
• 1x L-keys TORX®, black oxidised T6 x 80 mm (24314)
• 1x L-keys TORX®, black oxidised T7 x 88 mm (24315)
• 1x L-keys TORX®, black oxidised T8 x 101 mm (24316)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T9 x 111 mm (32386)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T10 x 121 mm (32387)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T15 x 136 mm (32388)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T20 x 148 mm (32389)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T25 x 163 mm (32390)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T27 x 176 mm (32391)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T30 x 191 mm (32392)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T40 x 210 mm (32393)
• 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T45 x 232 mm (10380)
• 1x ErgoStar holder

Increases your efficiency: Integrated powerful LED flashlight.

Saves time: Rapid voltage test thanks to contactless measuring.

Increases your flexibility: The voltage tester covers a large voltage range from 12 - 1,000 V AC.

Increases your efficiency: Compatible for use in all sockets worldwide thanks to measurement tip suited to international usage.

Product dimensions: 240 x 49 x 29 mm (LxWxD)

Application: For the detection and localization of live conductors, cable interruptions and cable breaks, blown fuses, defective lamps on light strings, as well as detection of individual wires.

Measuring category: CAT IV 1,000 V

Standards: EPS 22 UKEX 1 333 X, EPS 19 ATEX 1 223 X

Voltage 12 - 1,000 V AC

CAT IV, 1,000 V, ATEX certified

One-handed test

5-level optical signal

Acoustic signal can be switched on and off

Integrated flashlight function

Prior to the start of electrical installations, electricians must ensure that the work environment is voltage free. A voltage tester is needed for testing alternating electrical fields or detecting potential error sources. Thanks to its optical and acoustic signal, the non-contact Wiha voltage tester indicates whether or not there is any voltage. After switching on, the permanently green illuminated LED indicates readiness. During the voltage test, depending on the strength of the electrical alternating field, the LEDs are illuminated from blue (weak), 'to' orange, to red (strong). Two AAA batteries are required for use, which are included in the scope of delivery. If the device is not in use for 4 minutes, it switches off automatically to save energy. An integrated LED flashlight allows illumination of the measurement site in the dark and can also be used as a flashlight by manually switching it on and off. Thanks to its convenient size the voltage tester with push-on clip fits comfortably in any shirt or pant pocket. With its internationally adjustable measuring tip, the voltage tester is suitable for all outlet variations around the world. The single-pole voltage tester complies with the EN 61010-1 / IEC 61326 standard and is compatible with CAT IV 1,000 VAC. Furthermore,the tool is approved according to the ATEX standard for use in explosive areas (category II). The device should be tested on a known voltage source before and after use to ensure its functionality.

IEC/EN 61010-1, IEC/EN 61326, IP67