Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Das SECUMAX PLASTICUT unterscheidet sich von anderen Produkten aus unserem Sortiment nur im Detail. Aber Sie wissen: Genau darauf kommt es häufig an. Dank des großzügigen Spalts zwischen Klinge und Kunststoff meistert das Sicherheitsmesser z.B. Folie und Papier auch in mehreren Schichten. Angesichts einer Wandstärke von 3 mm sind zudem kurvige Schnitte in engen Zwischenräumen möglich. Die Klinge ist rostfrei, die Schneide TiN-beschichtet.
- Basismaterial:
Kunststoff
- Alles geschützt
Die Qualitätsklinge ist zwischen Nase und Griff sicher eingebettet. Sie schneiden also nur das, was Sie wirklich schneiden wollen. Für Sie und Ihre Ware besteht dabei keine Gefahr.
Nase zum Einstechen
Das SECUMAX PLASTICUT legen Sie nicht so schnell weg. Denn es ist angenehm leicht und handlich. Seine Nase ist nicht nach unten hin abgeflacht, sondern läuft spitz zu. Ideal zum Einstechen ins Schneidmaterial.
Rostfreie Klinge
Nicht jedes kleine Folienmesser ist mit einer rostfreien Klinge ausgestattet. Das SECUMAX PLASTICUT schon. Mehr noch: Seine Schneide ist zudem TiN-beschichtet. Beides erhöht die Wertigkeit und Haltbarkeit Ihres Schneidwerkzeugs.
Einmalig gut
Das SECUMAX PLASTICUT ist ein Einwegmesser. Da Sie die Klinge nicht zu wechseln brauchen, können weder Sie noch Ihre Mitarbeiter mit ihr in Berührung kommen. Ein Plus in Sachen Sicherheit.
Bestens platziert
Das SECUMAX PLASTICUT geht Ihnen nicht so schnell verloren. Da das Sicherheitsmesser mit einer Öse ausgestattet ist, kann man es immer an einem sinnvollen Ort befestigen.
- Hauptschneidmaterialien:
Wickel-, Stretch-, Schrumpffolie
Klebeband
Folien- und Papierbahnen
Briefumschlag
Garn, Schnur
Die GRAFIKKLINGE NR. 640 ist unter der Bestellnummer 640.82 zu 100 Stk. erhältlich.
- Schliff:
Spezialschliff
Klingen-Facetten:
2-fach
Klingeneigenschaften:
1-fach nutzbare Klinge
- Basismaterial:
Stahl
- The superior High-Leverage Diagonal Cutter with patented double joint
- ideal transmis sion of force due to double-hinged design
- reliably cuts all types of wire, including steel t ape
- for rough or very fine cutting
- low cutting impact: gentle on hands. The tension on muscles and tendons is relieved
- for comfortable cutting, repetitive cutting or extremely hard cutting jobs
- high degree of stability and zero-backlash due to precisely milled forged- in axles
- cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC
- attractive sales packaging with Euro standard perforation
- tools in a plastic deep-dr awn tray with transparent lid
- burnished tip, insulating multi-component handle, VDE-tested
- dimensions (W x H x D): 170 x 370 x 40 mm
- attractive sales packaging with Euro standard perforation
- tools in a plastic deep-dr awn tray with transparent lid
- burnished tip, insulating multi-component handle, VDE-tested
- dimensions (W x H x D): 170 x 370 x 40 mm
- For particularly demanding precision work: made from high-quality, martensitic hardened stee l, tough and highly resistant to corrosion
- Stainless steel with a slim, tapered design for m aximum precision when cutting, dissecting and segmenting extremely small objects in tight spaces
- For the electronics industry, as well as repairs and handicrafts
- Mainly used for cuttin g soft copper, gold or silver wires, as well as magnetic wires
- With extremely hard and sharp oblique cutting nippers
- Also available as an ESD-version: with black epoxy resin coating an d a surface resistance between 10^3 and 10^9 ohms
- ESD version only: this allows to compansat e in a controlled manner the differences in potential between the operator and electronic components
Makita
Meets your requirements: Black hammer head / medium soft: e.g. for paving, tiling, dry wall construction. Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 290 x 87 x 34 mm (LxWxD)
GS tested.
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Protects your health: No risk of injury, *all bits stowed safely inside the handle.
Product dimensions: 283 x 50 x 40 mm (LxWxD)
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to inserted insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
- 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Protects your health: No risk of injury, all blades stowed safely inside the handle.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Product dimensions: 283 x 50 x 40 mm (LxWxD)
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to inserted insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button. This makes it easy to remove the 75 mm slimBits. The insulated metal ClicFix bit holder grips all slimBits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified as per international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clamps thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling. The 75 mm slimBits are compatible with all products in the Wiha ElectricVario family.
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
- 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)