Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- DDF482RFJ Akku-Bohrschrauber 18V
- 2-Gang-Vollmetall-Planetengetriebe
- Drehmoment in 21 Stufen einstellbar
- Mit leuchtstarker Doppel-LED mit Nachglimmfunktion
- XPT - Xtreme Protect Technology. Optimaler Schutz gegen Staub und Spritzwasser auch unter harten Bedingungen
- Lieferumfang: 2x Akku und Ladegerät, in MAKPAK Gr.2
Technische Details:
- Leerlaufdrehzahl 1. Gang: 0-600 min-1
- Leerlaufdrehzahl 2. Gang: 0-1900 min-1
- Bohrleistung in Holz: 38mm
- Bohrleistung in Stahl: 13mm
- Drehmoment weich: 36 Nm
- Drehmoment hart: 62 Nm
- Bohrfutterspannweite: 1,5-13mm
- Akkuspannung: 18V
- Maße (LxBxH): 185x79x249mm
- Gewicht (inkl. Akku): 1,7 kg


- equipped with tools for photovoltaics
- with Crimp System Pliers 97 43 200 A for inter changeable crimping dies, crimping pressure is precisely set at the factory (calibrated)
- wit h cable shears 95 16 165 for copper cables up to Ø 15 mm
- with assembly tool (Allen key) for changing the crimping dies
- with set of mounting tools 97 49 66 2 to loosen and tighten cable glands of MC4 solar plugs and to open the locking of MC4 housing
- foam insert with recesses for tools, 2 crimping dies and 2 locators
- impact-resistant plastic case
- external dim ensions: 345 x 80 x 280 mm (W x H x D)
- With crimping die 97 49 66 (2.5 / 4.0 /6.0 mm²) for s olar connector MC4(Multi-Contact), locator 97 49 66 1 and assembly tool set 97 49 66 2
- With Precision stripping pliers 12 12 11(1.5 / 2.5 / 4.0 / 6.0 mm²) with adapted blades for smaller strip ping capacities


- equipped with tools for photovoltaics
- with Crimp System Pliers 97 43 200 A for inter changeable crimping dies, crimping pressure is precisely set at the factory (calibrated)
- wit h cable shears 95 16 165 for copper cables up to Ø 15 mm
- with assembly tool (Allen key) for changing the crimping dies
- with set of mounting tools 97 49 66 2 to loosen and tighten cable glands of MC4 solar plugs and to open the locking of MC4 housing
- foam insert with recesses for tools, 2 crimping dies and 2 locators
- impact-resistant plastic case
- external dim ensions: 345 x 80 x 280 mm (W x H x D)
- With crimping die 97 49 71 for solar cable connectors MC4 (Multi-Contact) 4.0 - 10.0 mm², locator 97 49 71 1 and set of mounting tools 97 49 66 2
- With Precision Insulation Stripper 12 12 12 with adapted blades for larger stripping capacities 4.0 / 6.0 / 10.0 mm²


- Similar in technology to the TonerVac from 3M, but ca. 6 dB(A) less noisy(!), and consumes less energy
- 3 filter types: Type 1 is a HEPA filter for very fine toner, type 2 is for normal toner and the ULPA-Filter is for fine toner up to 0,12µ.
- one ULPA-filter included
- with overheat-protection
- 230V motor with 450 W
- ESD-safe
- ca. 49 x 23.5 x 19 cm (LxHxW), weight ca. 5 kg
Note: this vacuum cleaner is meant to clean toner pollution in printers and copiers. If big toner quantities must be cleaned, e.g. if cartridges are opened, other vacuum cleaners with atex-certification may be required. If in doubt, please refer to the toner material safety data sheet.
WEEE-Reg.-Nr. DE20337627.
Part list


Makita


Makita






- Equipped with 12 KNIPEX tools, a total of 12 brand tools, partly VDE-tested according to DIN EN 60900
- With a total of 15 inserting options
- compact tool case for the service tec hnician
- Suitable as an insert for: "Basic" 00 21 05 LE, "BIG Basic Move" 00 21 06 LE, "BIG T win Move" 00 21 41 LE, "BIG Twin" 00 21 42 LE, "BIG Twin Move RED" 98 99 15 LE and other popular too l cases
- with 8 tool pouches and 7 tool straps
- slip-through back strap to attach to a trolley
- made from tough polyester fabric, with zip fastener
- Dimensions exterior (W x H x D): 410 x 60 x 290 mm

