Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistan ce and stable gripping
- box-joint design for high stability due to double guide
- robus t construction, insensitive to dirt
- particularly suitable for outdoor work
- Pinch gu ard prevents operators' fingers being pinched
- pliers with tether attachment point for mounti ng a fall protection system
- with slim multi-component grips without collar for better handli ng and easier transport
- easy cutting thanks to the high leverage joint
- For all common installation and repai r work.
- handy use when working in confined areas thanks to slim head design and pointed jaws (anti-twist)
- milled groove in the gripping area permits small parts such as nails, pins and bolts to be held and pulled
- the reliable and diverse combination pliers when out and about< /li>
- with cutting edges for soft, medium-hard and hard wire
- long service life and stable tips
- cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC
- For secure handling of electronic workparts: equalize differences in electrical potential be tween their user and the workpieces in a controlled manner
- Maximum comfort for frequent use< /li>
- Handles suitable for use in clean rooms and controlled environments
- For medical tech nology, electronics, microscopy, industry
- For particularly demanding precision work: tough a nd highly resistant to corrosion
- Antimagnetic to avoid electromagnetic damage
- ESD-te sted, soft, and ergonomic handle sleeves with a surface resistance between 10^3 and 10^9 ohms
Wiha
Product dimensions: 277 x 127 x 31 mm (LxWxD)
ISO 2936K.
Wiha
Product dimensions: 105 x 66 x 40 mm (LxWxD)
Application: The bits and bit holder can be used in both machine and manual modes.
Secure hold of the bits thanks to mechanically locking 1/4" bit holder with magnet
With 30 bits and bit holder
Looking for the correct bit in the tool case is tedious and time consuming, especially when working on the move. The Standard bit set from Wiha is ideally suited for maintaining structure and system. Including 30 high-quality 25 mm standard bits, the box ensures order at all times and in every place, providing the correct bit for all manual and machine screw connections. The magnetic 1/4" universal bit holder with powerful Neodymium magnet securely and firmly holds the bits. The robust box made of stable high-quality plastic can be opened with simple unlocking and provides a clear overview of the collection of bits. Thanks to the convenient hook element the bit box can also be simply hung on the wall.
DIN 3126, ISO 1173 style C 6.3
Content:
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 5.5 mm (01624)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 6.5 mm (01626)
- 2x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 6x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
- 2x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 6x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T10 (01716)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T40 (01722)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 4.0 mm (01706)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 5.0 mm (01707)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 6.0 mm (01708)
- 1x Bit holder magnetic 58 mm 1/4" (01895)
- 1x Bit box
Wiha
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 270 x 100 x 32 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.
Standards: DIN ISO 5746.
Manufactured acc. to IEC 60900.
Wiha
Product dimensions: 277 x 51 x 28 mm (LxWxD)
Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.
Application: For work in the area of live parts up to 1,000 V AC.
Standards: Manufactured acc. to IEC 60900.
DIN ISO 5746.
Wiha
Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Protects your health: Special DynamicJoint® design reduces effort required for cutting.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 180 x 50 x 35 mm (LxWxD)
Application: Power-assisted all-round diagonal cutter for cutting soft to extremely hard wires and cables.
Standards: Manufactured acc. to IEC 60900.
Precise and clean cutting of soft and hard wire
Special DynamicJoint® joint design and optimized lever transmission for up to 40% more power
With switchable opening spring
Kind to hands and muscles
Safe operation up to 1,000 V AC
Cutting cables and wires to length in continuous use requires a great deal of force and causes considerable strain on wrists. Wiha heavy-duty diagonal cutters with a two-component handle provide effortless cutting for heavy duty use. The power joint with DynamicJoint® ensures that the hand force is optimally transferred to cutting surfaces, providing up to 40% greater cutting force. Its opening spring can be switched on and off, which allows the user to work effortlessly for long periods of time. With their semi-circular head, these powerful pliers also guarantee a clean cut edge. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life. In addition, the heavy-duty diagonal cutters are manufactured as per the international standard IEC 60900 and are thus approved for work on live parts up to 1,000 V AC.
To benefit from this product for as long as possible, we recommend regularly applying a drop of oil after use.
DIN ISO 5749.