Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.

Simplifies your work: Makes work easier, optimum impact effect and less effort needed.

Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.

Product dimensions: 288 x 108 x 26 mm (LxWxD)

Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.

Extra: With cast iron balls inside the hammer head for recoilless work.

Choosing the right hammer is particularly important on sensitive surfaces to prevent damage. With its steel tube handle, the no-recoil soft-faced hammer allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. Around 25% more hammer head mass ensures additional power. The yellow medium-hard hammer faces are ideal for universal use in areas such as tool and machine engineering as well as sheet metal and assembly work. The hammer is also impressive due to its steel tube handle with ergonomic, non-slip grip. Each hammer head is available individually as a spare part.

Increases your efficiency: Two pliers in one - 200 % power at the touch of a button, available at any time.

Protects your health: Requires less force and reduces pressure on the wrists.

Product dimensions: 215 x 60 x 28 mm (LxWxD)

Application: Suitable for cutting different materials, ranging from soft to extremely hard, such as cables, nails, screws, bolts, wire cable, spring wire and chains.

Simple switching from 100% to 200% for hard materials

Power off - 100% power with maximum opening width, e.g. for cables

Power on - 200% power with reduced opening width, e.g. for screws and chains

Precise, safe work - at double the power: no problem for the Wiha BiCut® electric diagonal cutters. If standard performance from heavy-duty diagonal cutters is no longer enough, the force can be doubled at the simple press of a button. In normal mode, BiCut® effortlessly cuts items such as cables or iron nails. A patented joint design transforms the heavy-duty diagonal cutters into high-performance diagonal cutters for extremely hard and stronger materials. This function is not only suitable for cutting exceptionally tough materials but also for users who need to carry out normal cutting tasks over a longer period of time. Thanks to double cutting force, the user only needs to apply half the hand force. This ensures that the work is easy on muscles and tendons. In addition, it significantly reduces the risk of cramping or slipping if too much force is applied. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life.

To benefit from this product for as long as possible, we recommend regularly applying a drop of oil after use.

Based on DIN ISO 5749.

Increases your efficiency: Two pliers in one - 200 % power at the touch of a button, available at any time.

Protects your health: Requires less force and reduces pressure on the wrists.

Product dimensions: 203 x 100 x 32 mm (LxWxD)

Application: For cutting various materials from soft to extremely hard, such as cables, nails, screws, bolts, wire cable, spring wire, chains, etc.

Head shape: Semi-circular.

Material: Hard as steel - Drop forged of high-quality C70 steel.

Based on DIN ISO 5749.

Meets your requirements: White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.

Simplifies your work: Makes work easier, optimum impact effect and less effort needed.

Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.

Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.

Product dimensions: 350 x 115 x 31 mm (LxWxD)

Extra: With cast iron balls inside the hammer head for recoilless work.

GS tested.

Makes handling easier: Simple, automatic setting of the box-type, precision-stepped joint.

Saves time: Rapid setting of opening width, especially in constantly changing applications.

Product dimensions: 255 x 60 x 18 mm (LxWxD)

Application: For quick and optimal gripping and holding pipes and angular profiles such as hexagon nuts in installations.

Turning, pulling, gripping and holding of e.g. pipes or tightening screws and nuts

Schnelle automatische Einstellung der Greifweite auf das Werkstück

Maximale Variabilität dank feinverzahntem Gleitgelenk

Highest stability thanks to a box type joint

Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer the optimal grip for all occasions. With detent adjustment, it offers maximum variability in the installation area, where the precise mechanical setting takes place automatically while gripping the work piece. Crushing injuries are prevented thanks to the integrated clamping protection. Double guidance based on a box joint ensures the greatest stability of the pliers. At the same time, the slim design in the head and joint area provides reliable access to the work piece, even in confined areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. In addition, slipping off the work piece is prevented by the self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable secure grip with long-term durability. The robust water pump pliers are dirt resistant.

DIN ISO 8976.

Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.

Protects your health: Reduces strain from continuous work thanks to opening spring.

Protects your health: Special DynamicJoint® design reduces effort required for cutting.

Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Product dimensions: 200 x 50 x 35 mm (LxWxD)

Application: Power-assisted all-round diagonal cutter for cutting soft to extremely hard wires and cables.

Standards: Manufactured acc. to IEC 60900.

Precise and clean cutting of soft and hard wire

Special DynamicJoint® joint design and optimized lever transmission for up to 40% more power

With switchable opening spring

Kind to hands and muscles

Safe operation up to 1,000 V AC

Cutting cables and wires to length in continuous use requires a great deal of force and causes considerable strain on wrists. Wiha heavy-duty diagonal cutters with a two-component handle provide effortless cutting for heavy duty use. The power joint with DynamicJoint® ensures that the hand force is optimally transferred to cutting surfaces, providing up to 40% greater cutting force. Its opening spring can be switched on and off, which allows the user to work effortlessly for long periods of time. With their semi-circular head, these powerful pliers also guarantee a clean cut edge. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life. In addition, the heavy-duty diagonal cutters are manufactured as per the international standard IEC 60900 and are thus approved for work on live parts up to 1,000 V AC.

To benefit from this product for as long as possible, we recommend regularly applying a drop of oil after use.

DIN ISO 5749.

Increases your efficiency: Fully compatible with the Wiha slimBit system.

Increases your efficiency: The correct torque protects material from damage and means no follow-up work.

Lowers your costs: The correct torque protects you from warranty claims.

Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Product dimensions: 200 x 132 x 22 mm (LxWxD)

Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.

Torque adapter for 0,8 Nm

Acoustic and physically perceptible triggering signal protects against damage to materials and rework

Safe operation up to 1,000 V AC

Electrical fastening and removing of screws

Screwdriver and diagonal cutters, 5 pcs. in tool pouch

The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter with an accuracy of ±10% guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter made of metal also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario® screwdriver with bit holder, the slimVario® Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time (bit holder and blades are not included in the delivery contents). A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque torque adapter undergoes routine testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.

Manufactured acc. to IEC 60900.

Increases your efficiency: Fully compatible with the Wiha slimBit system.

Increases your efficiency: The correct torque protects material from damage and means no follow-up work.

Lowers your costs: The correct torque protects you from warranty claims.

Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Product dimensions: 200 x 132 x 22 mm (LxWxD)

Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.

Torque adapter for 2,0 Nm

Acoustic and physically perceptible triggering signal protects against damage to materials and rework

Safe operation up to 1,000 V AC

Electrical fastening and removing of screws

Screwdriver and diagonal cutters, 5 pcs. in tool pouch

The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter with an accuracy of ±10% guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter made of metal also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario® screwdriver with bit holder, the slimVario® Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time (bit holder and blades are not included in the delivery contents). A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque torque adapter undergoes routine testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.

Manufactured acc. to IEC 60900.

Increases your efficiency: Fully compatible with the Wiha slimBit system.

Increases your efficiency: The correct torque protects material from damage and means no follow-up work.

Lowers your costs: The correct torque protects you from warranty claims.

Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Product dimensions: 200 x 132 x 22 mm (LxWxD)

Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.

Torque adapter for 2,5 Nm

Acoustic and physically perceptible triggering signal protects against damage to materials and rework

Safe operation up to 1,000 V AC

Expandable and compatible with EVF products

The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter with an accuracy of ±10% guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter made of metal also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario® screwdriver with bit holder, the slimVario® Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time (bit holder and blades are not included in the delivery contents). A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque torque adapter undergoes routine testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.

Manufactured acc. to IEC 60900.