Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- high transmission ratio for easy cutting
- requires 50 % less effort compared with con ventional combination pliers due to optimised transmission ratio
- solid construction for heav iest strain
- universally applicable
- ergonomically optimised handle shape for firm co ntact to the hand and fatigue reducing operation
- particularly effective cross-hatched knurle d gripping zone in the jaws - for strong gripping and pulling
- additional gripping zone below the joint for powerful leverage and pressing performance
- with cutting edges for soft and ha rd wire
- cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC< /li>
- American style
- pliers with tether attachment point for mounting a fall protection sy stem
Knipex
- rotating, universal grip inserts for reliably gripping the clamps in all positions
- J aw inserts can also be rotated under load
- extremely good leverage which allows clamps to be opened easily without great effort
- slim head design
- narrow head width, rotating gri p inserts make this an ideal tool, especially in confined areas
- additional function: detach hoses gently using the serrated jaw
- Can be used for standard, space-saving and wire clamps, as well as for spring band clamps with a nominal size of up to 50 mm
- allows more than 30 mm clamping range
- high transmission ratio for easy cutting
- requires 50 % less effort compared with con ventional combination pliers due to optimised transmission ratio
- solid construction for heav iest strain
- universally applicable
- ergonomically optimised handle shape for firm co ntact to the hand and fatigue reducing operation
- particularly effective cross-hatched knurle d gripping zone in the jaws - for strong gripping and pulling
- additional gripping zone below the joint for powerful leverage and pressing performance
- with cutting edges for soft and ha rd wire
- cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC< /li>
- American style
- For secure handling of electronic workparts: equalize differences in electrical potential be tween their user and the workpieces in a controlled manner
- Maximum comfort for frequent use< /li>
- Handles suitable for use in clean rooms and controlled environments
- For medical tech nology, electronics, microscopy, industry
- For particularly demanding precision work: tough a nd highly resistant to corrosion
- Antimagnetic to avoid electromagnetic damage
- ESD-te sted, soft, and ergonomic handle sleeves with a surface resistance between 10^3 and 10^9 ohms
Wiha
Product dimensions: 90 x 70 x 13 mm (LxWxD)
Application: Extra long bits for all types of fastening in trade and industry.
Bits: 70 mm Standard bits.
Extra: Compact plastic bit band with belt clip.
DIN 3126, ISO 1173, Style E6,3
Content:
- 2x Bit Professional 70 mm TORX® ball end 1/4" E6,3 T10 (32416)
- 2x Bit Professional 70 mm TORX® ball end 1/4" E6,3 T15 (32418)
- 2x Bit Professional 70 mm TORX® ball end 1/4" E6,3 T20 (32419)
- 2x Bit Professional 70 mm TORX® ball end 1/4" E6,3 T25 (32421)
- 2x Bit Professional 70 mm TORX® ball end 1/4" E6,3 T30 (32423)
- 1x Bit band
Wiha
Product dimensions: 135 x 75 x 41 mm (LxWxD)
Application: Thanks to the handle and bit holder design, the set can be used in both machine and manual modes.
1/4" bits suited for manual and machine operation
Secure hold of the bits thanks to mechanically locking 1/4" bit holder with magnet
SoftFinish screwdriver with 1/4" bit holder for manual fastening
With 30 bits, bit holder and handle
Looking for the correct bit in the tool case is tedious and time consuming, especially when working on the move. The Collector bit set from Wiha is ideally suited for maintaining structure and system. With 30 high-quality 25 mm standard bits, the box keeps things tidy at all times and in all places. The included SoftFinish® screwdriver handle can be used for manual fastening while the magnetic 1/4" CentroFix bit holder with powerful Neodymium magnet securely holds the bits for machine-based screw connections. The robust box made of stable high-quality plastic can be opened with the push of a button and provides a clear overview of the collection of bits.
DIN 3126, ISO 1173 style C 6.3
Content:
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 5.5 mm (01624)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 6.5 mm (01626)
- 2x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 5x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 2x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
- 2x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 5x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 2x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T10 (01716)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T40 (01722)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 4.0 mm (01706)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 5.0 mm (01707)
- 1x Bit Standard 25 mm Hexagon 1/4" C6,3 6.0 mm (01708)
- 1x CentroFix Force bit holder, lockable 1/4", magnetic in box Holds what it promises! 60 mm (39133)
- 1x Screwdriver with bit holder SoftFinish® magnetic 1/4" 112 mm (32160)
- 1x Collector Box
Wiha
Meets your requirements: White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Product dimensions: 305 x 125 x 40 mm (LxWxD)
GS tested.
Wiha
Increases your flexibility: Variably adjustable right or left rotation through switching lever.
Simplifies your work: With a convenient foam insert for clearly structured storage.
Increases your efficiency: Fastening without interruption thanks to a finely toothed ratchet wrench.
Meets your requirements: Precise fitting, robust, and easy to clean.
Product dimensions: 212 x 143 x 35 mm (LxWxD)
Application: For installation and mounting work.
Tightening and loosening strongly tightened hex screws and nuts requires an enormous amount of force. With the nut driver inserts from Wiha the user can easily open any fastening. Every user is excellently equipped with the set consisting of the 13 most popular 1/4" nut driver inserts size 4-14 mm, a ratchet wrench, and two extensions. The included ratchet wrench combined with the selection of nut drivers gives users the required flexibility for their work. When working with the ratchet wrench, the user benefits from the fine toothing with 72 teeth, offering a short return angle. The right or left rotation can be variably adjusted by the integrated switching lever. The combination with the included extensions allow them to conveniently reach deep-set screws and nuts. The nut driver and extensions are mechanically locked. The change is initiated by pressing the activation button. Made of high quality chrome vanadium steel, the nut driver inserts are distinguished by their longevity and robustness, not the least thanks to their corrosion-resistant and easy to clean surface. The entire contents of the set are neatly and clearly stored in a foam insert in which markings help find the suitable nut driver.The non-slip surface finish ensures a strong grip, even in oily or wet work situations.
Based on DIN 3120 / 3122 / 3124
Content:
- 1x Ratchet wrench for nut drivers 1/4" switchable 128 mm (33301)
- 1x Nut driver insert 1/4" hexagon head 4.0 mm x 25 mm (44669)
- 1x Nut driver insert 1/4" hexagon head 4.5 mm x 25 mm (44677)
- 1x Nut driver insert 1/4" hexagon head 5.0 mm x 25 mm (44670)
- 1x Nut driver insert 1/4" hexagon head 5.5 mm x 25 mm (44671)
- 1x Nut driver insert 1/4" hexagon head 6.0 mm x 25 mm (33319)
- 1x Nut driver insert 1/4" hexagon head 7.0 mm x 25 mm (33320)
- 1x Nut driver insert 1/4" hexagon head 8.0 mm x 25 mm (33321)
- 1x Nut driver insert 1/4" hexagon head 9.0 mm x 25 mm (33322)
- 1x Nut driver insert 1/4" hexagon head 10.0 mm x 25 mm (33323)
- 1x Nut driver insert 1/4" hexagon head 11.0 mm x 25 mm (33325)
- 1x Nut driver insert 1/4" hexagon head 12.0 mm x 25 mm (33326)
- 1x Nut driver insert 1/4" hexagon head 13.0 mm x 25 mm (33327)
- 1x Nut driver insert 1/4" hexagon head 14.0 mm x 25 mm (44681)
- 1x Extension 1/4" for nut driver inserts 75 mm (33303)
- 1x Extension 1/4" for nut driver inserts 150 mm (33304)
- 1x Foam insert