Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Wiha
Product dimensions: 185 x 52 x 13 mm (LxWxD)
Application: General purpose pliers for gripping and holding as well as cutting soft and hard wires and cables.
DIN ISO 5746.
Wiha
Product dimensions: 182 x 98 x 20 mm (LxWxD)
Important: TORX PLUS® keys cannot be used with TORX® screws.
Application: For high torque transfer with minimal effort.
Extra: The stronger profile of the TORX PLUS® tip allows up to 25% extra torque than the TORX® profile.
Extra: ChromTop® blade tip for the highest accuracy.
Handle: Wiha Classic T-handle.
Blade: Chrome-vanadium steel, through hardened, chrome-plated.
Wiha
Product dimensions: 85 x 10 x 10 mm (LxWxD)
Drive: DIN 3120, ISO 1174, style A 6.3 + A 10.
Drive: With 1/4" hex shank according to DIN 3126 C 6.3.
Application: Drilling, cutting threads and burring. For assembly work, repair and rethreading.
Application: Can be used in metal and plastic.
Bits: Reduced, over-tightened profile.
Extra: Three applications in a single work step. Particularly sutiable for use in battery-powered drivers.
Material: High-quality HSS steel, ground.
Packaging: Blister packed.
DIN 3126, ISO 1173, Style C6,3
Wiha
Simplifies your work: Striking cap integrated into the handle allows you to strike and lift with the screwdriver.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Increases your safety: Anti-slip handle simplifies work in oily and wet application areas.
Product dimensions: 213 x 36 x 36 mm (LxWxD)
Application: Best suited for turning screws in wet and oily applications.
Oily or damp work environments pose a risk that a screwdriver handle provides little support and users are unable to apply higher torques. The MicroFinish screwdriver eliminates such problems thanks to its micro-fine surface and guarantees optimum grip. The solid steel cap on the handle end allows direct hammering - to loosen screws which are stuck, for example. The impact energy is transmitted without any losses due to the direct connection between the solid steel cap and blade. The hexagon head on the blade enables higher torques to be transferred using a screw wrench. Wiha screwdrivers also stand out due to their sophisticated handle size concept. The long, slender handle sizes can be used to fasten small screws quickly and firmly. There are also large handle sizes to fasten large screws which can be used to apply greater torques. The various handle sizes have also been matched to the consistently same-sized hand of screw-fastening professionals.
Wiha
Product dimensions: 130 x 50 x 40 mm (LxWxD)
Drive: DIN 3126, ISO 1173, style D 6.3.
Application: Eminently suitable for working in confined, hard-to-reach spaces.
Perfect for confined spaces
Compact and space-saving
Magnetic bit chuck
Convenient bit storage in the handle
The Stubby magazine bit holder contains bits in its handle. If you remove the cap on the end of the SoftFinish® multi-component handle, six 25 mm bits appear, designed for all standard screw fastenings. The magazine bit holder is thus flexible in its use and an attractive alternative to screwdriver sets, especially for portable use. The magnetic holding feature in the integrated bit holder ensures easy handling and an optimum grip. The practical, compact size sets the Stubby bit magazine apart as a specialized tool for working in highly confined spaces.
Content:
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 6.5 mm (01626)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 8.0 mm (01627)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
Wiha
Product dimensions: 130 x 50 x 40 mm (LxWxD)
Drive: DIN 3126, ISO 1173, style D 6.3.
Application: Eminently suitable for working in confined, hard-to-reach spaces.
Perfect for confined spaces
Compact and space-saving
Magnetic bit chuck
Convenient bit storage in the handle
The Stubby magazine bit holder contains bits in its handle. If you remove the cap on the end of the SoftFinish® multi-component handle, six 25 mm bits appear, designed for all standard screw fastenings. The magazine bit holder is thus flexible in its use and an attractive alternative to screwdriver sets, especially for portable use. The magnetic holding feature in the integrated bit holder ensures easy handling and an optimum grip. The practical, compact size sets the Stubby bit magazine apart as a specialized tool for working in highly confined spaces.
Content:
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
Wiha
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.
Product dimensions: 191 x 30 x 30 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Wiha
Increases your efficiency: Extensive interchangeable blade system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 136 x 20 x 20 mm (LxWxD)
Application: In combination with the Wiha torque screwdriver with T-handle TorqueVario®-S T electric, it is ideal for controlled fastening of predefined torques for tasks such as industrial assembly work.
Safety is the top priority when users are working on live parts. In combination with the insulated Wiha torque screwdriver T-handle TorqueVario®-S electric, the interchangeable blade electric enables controlled fastening and loosening of screws. The insulated interchangeable blade is subject to individual piece testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
Only compatible with Wiha torque screwdriver with T-handle TorqueVario®-S T electric
Manufactured acc. to IEC 60900.
Wiha
Increases your efficiency: Extensive interchangeable blade system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 136 x 20 x 20 mm (LxWxD)
Application: In combination with the Wiha torque screwdriver with T-handle TorqueVario®-S T electric, it is ideal for controlled fastening of predefined torques for tasks such as industrial assembly work.
Safety is the top priority when users are working on live parts. In combination with the insulated Wiha torque screwdriver T-handle TorqueVario®-S electric, the interchangeable blade electric enables controlled fastening and loosening of screws. The insulated interchangeable blade is subject to individual piece testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
Only compatible with Wiha torque screwdriver with T-handle TorqueVario®-S T electric
Manufactured acc. to IEC 60900.
Wiha
Increases your efficiency: Extensive interchangeable blade system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 136 x 20 x 20 mm (LxWxD)
Application: In combination with the Wiha torque screwdriver with T-handle TorqueVario®-S T electric, it is ideal for controlled fastening of predefined torques for tasks such as industrial assembly work.
Safety is the top priority when users are working on live parts. In combination with the insulated Wiha torque screwdriver T-handle TorqueVario®-S electric, the interchangeable blade electric enables controlled fastening and loosening of screws. The insulated interchangeable blade is subject to individual piece testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
Only compatible with Wiha torque screwdriver with T-handle TorqueVario®-S T electric
Manufactured acc. to IEC 60900.