Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
All prices are net. Packing, transport and taxes will be charged additionally.
Items: 31622
Order-No.
Information
4250838514057
Bernstein
Bernstein
ESD Seitenschneider CLAssICline Semi Flush 115mm ableitfaehiCutters and Pliers
No. 3-603-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA01.5/1.2/0.3/0 head width 11 mm blade length 13 mm The pliers of this program have been successfully tested by several test laboratories according to DIN EN 61340-5-1, 61340-2-1 as well as 61340-2-3 for work in ESD-protected areas. Made of special tool steel, high gloss mirror polished, box joint, with dissipative 2-K hand protection cover and exchangeable double leaf spring. material high-quality steel (HRC 56-58) surface brightly polished 2-component ESD plastic handle ergonomically shaped, dissipative between 10^6 and 10^9 ohm length 115 mm weight 65 g Semi Flush (with side face, cut pyramid shape)
show more
Price: EUR 29.57
4250838514064
Bernstein
Bernstein
ESD Seitenschneider CLAssICline Flush 115mm ableitfaehigCutters and Pliers
No. 3-604-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA01.5/1.2/0/0 head width 11 mm blade length 13 mm The pliers of this program have been successfully tested by several test laboratories according to DIN EN 61340-5-1, 61340-2-1 as well as 61340-2-3 for work in ESD-protected areas. Made of special tool steel, high gloss mirror polished, box joint, with dissipative 2-K hand protection cover and exchangeable double leaf spring. material high-quality steel (HRC 56-58) surface brightly polished 2-component ESD plastic handle ergonomically shaped, dissipative between 10^6 and 10^9 ohm length 115 mm weight 65 g Flush (mini side face cut with small top)
show more
Price: EUR 29.57
4250838514071
Bernstein
Bernstein
ESD Seitenschneider CLAssICline Flush 120mm ableitfaehigCutters and Pliers
No. 3-606-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA01.0/0.8/0/0 head width 10.5 mm blade length 6 mm, 30xB0 curved The pliers of this program have been successfully tested by several test laboratories according to DIN EN 61340-5-1, 61340-2-1 as well as 61340-2-3 for work in ESD-protected areas. Made of special tool steel, high gloss mirror polished, box joint, with dissipative 2-K hand protection cover and exchangeable double leaf spring. material high-quality steel (HRC 56-58) surface brightly polished 2-component ESD plastic handle ergonomically shaped, dissipative between 10^6 and 10^9 ohm length 120 mm weight 55 g Flush (mini side face cut with small top)
show more
Price: EUR 29.57
Automatische CrimpzangeCutters and Pliers
No. 3-0612. ratchet mechanism With ratchet mechanism for crimping of insulated terminals, version: 0.5 - 1.0 / 1.5 - 2.5 / 4 - 6 mm^2 (AWG 22 - 18 / 16 - 14 / 12 - 10) Automatic crimping pliers ratchet mechanism for crimping insulated terminals. material tool steel (HRC 54-56) surface burnished 1-component plastic handle non-slip length 220 mm weight 430 g for crimping isolated terminals
show more
Price: EUR 30.32
4250838525480
Bernstein
Bernstein
Drehmoment-Adapter 0.1Nm fuer 4mm BitsTorque products
No. 4-971. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.08
4250838525497
Bernstein
Bernstein
Drehmoment-Adapter 0.2Nm fuer 4mm BitsTorque products
No. 4-972. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.08
4250838525503
Bernstein
Bernstein
Drehmoment-Adapter 0.3Nm fuer 4mm BitsTorque products
No. 4-973. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.08
4250838525510
Bernstein
Bernstein
Drehmoment-Adapter 0.4Nm fuer 4mm BitsTorque products
No. 4-974. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.08
4250838525527
Bernstein
Bernstein
Drehmoment-Adapter 0.5Nm fuer 4mm BitsTorque products
No. 4-975. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.08
4250838525534
Bernstein
Bernstein
Drehmoment-Adapter 0.6Nm fuer 4mm BitsTorque products
No. 4-976. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.08