Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
For controlled fastening with the pre-set torque.
Blade
High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated.
Head
Nickel-plated, spring-mounted ball.
Holder
1/4 inch square
OAL: 155mm
- cutting face flush
- for nearly flush cutting of moulded plastic components from sprue s
- cuts soft materials such as lead in a flush cut
- with opening spring
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Saves space: Extensive interchangeable bit system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For work in the area of live parts up to 1,000 V AC.
Note: VDE and GS tested
To reach low-lying screws, the blade diameter is often too large in conventional electric screwdrivers. Because removing insulation is not permitted and also compromises the user's safety, protective insulation has been integrated into the blade with the Wiha slimTECHNOLOGY. This has been specially developed for electrical applications, thereby ensuring blades up to 33% slimmer. This means low-lying screw and spring elements can also be easily reached with the slimBits. The insulated slimBits undergo individual piece testing as per the international IEC 60900 standard, *providing users with a tool to work safely on live parts up to 1,000 V AC. 6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).
Manufactured acc. to IEC 60900.
Simplifies your work: The ball end facilitates access to screws and allows you to work at an angle of up to 25°.
Increases your efficiency: Wiha MagicRing® holding feature holds all hex screws in place without a magnet.
Makes handling easier: Always the correct key when you need it.
Lowers your costs: Highly durable thanks to high-quality, chrome-plated L-key surface to prevent corrosion.
Saves time: Ensures order: removal and targeted insertion in the holder is child's play.
Application: Ideal for removing standard countersunk screws and inserting and fastening in horizontal, inclined or deep tapped blind holes.
Supplementary information: MagicRing® from size 3 mm.
Easy removal
Quick selection
High-quality chromed surface
Perfect for confined spaces
Nonmagnetic holding feature
It's a common experience. It's not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates them in an ingenious way. Turning one L-key in the holder makes all other keys turn to the side at the same angle, enabling you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. Thanks to the stainless steel MagicRing® screw-holding spring, the L-keys hold all standard hex screws firmly in any position perfectly no matter what the screw is made of. This ensures that removing sunken screws or inserting and fastening a screw at an angle down to 25° is an extremely simple task.
Based on ISO 2936L.
Content:
- 1x L-keys Hexagonal ball end matt chrome-plated 1.5 mm x 91 mm (01392)
- 1x L-keys Hexagonal ball end matt chrome-plated 2.0 mm x 101 mm (01393)
- 1x L-keys Hexagonal ball end matt chrome-plated 2.5 mm x 113 mm (01395)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 3.0 mm x 128 mm (20549)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 4.0 mm x 142 mm (20550)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 5.0 mm x 163 mm (20570)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 6.0 mm x 184 mm (20551)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 8.0 mm x 206 mm (20552)
- 1x L-keys Hexagonal ball end MagicRing® matt chrome-plated 10.0 mm x 231 mm (20553)
- 1x ErgoStar holder