Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Martor
Manchmal ist ein Schneidgut zu hoch oder zu weit weg und damit nur schwer für Sie erreichbar. Das CONNECTOR SET von MARTOR hilft Ihnen, Entfernungen beim Schneiden zu überbrücken. Es besteht aus dem CONNECTOR, der sich einfach und stabil mit unseren Sicherheitsmessern SECUMAX 350, 350 SE, 150 und 148 verbinden lässt, und der passenden TELESKOPSTANGE von MARTOR. Mit diesem Set gewinnen Sie bis zu 95 cm an Reichweite hinzu.
- Basismaterial:
Aluminium
- Praktische Problemlösung
Hohe Paletten, die von Umreifungen und Folien ummantelt sind, sind ein typisches Beispiel für das Schneiden auf Distanz. Mit der Kombination aus TELESKOPSTANGE, CONNECTOR und Sicherheitsmesser sind Sie hier bestens aufgestellt.
Flexibel einstellbar
Über die Stellschraube können Sie den Winkel des CONNECTORS flexibel verändern. Sie haben die Wahl zwischen diversen Einstellungen. Nehmen Sie diejenige, die am besten zu Ihrer Schneidanwendung passt.
Länge nach Bedarf
CONNECTOR und TELESKOPSTANGE passen perfekt und sind im Handumdrehen zusammengeschraubt. Mehr noch: Je nach Distanz des Schneidguts können Sie die Länge der Stange stufenlos anpassen (von 42 bis 95 cm).
Passende Messer
Der CONNECTOR ist für unsere vielseitigen Sicherheitsmesser SECUMAX 350, 350 SE, 150 und 148 ausgelegt. Einfach das gewählte Messer formschlüssig fixieren, den für Sie optimalen Winkel des CONNECTORS einstellen und schneiden.
- precision pliers for fine assembly work, e. g. in electronics and fine mechanics
- for gripping, holding and bending
- bolted joint: precise, zero backlash operation of pliers
- precisely finished joint surfaces for smooth, low friction movement along the complete opening r ange
- low-friction double spring for gentle and even opening
- edges carefully deburred
- non-reflective finish
- for very precise assembly work, e.g. in electronics and fine mechanics
- approx. 20% lighter than conventional electronics pliers
- smooth-running do uble spring for a gentle and even opening
- Pinch guard prevents operators' fingers being pinched
- time-saving, precise adjustmen t of the gripping width directly on the workpiece at the push of a button
- less effort requir ed due to self-locking action
- no unintentional shifting of the pliers handles
- high w ear resistance due to the additionally hardened teeth
- maximum load capability thanks to comp letely hardened handles
- Gripping jaws with specially hardened teeth, hardness approx. 56 HRC
- with precision cutting edges for soft, hard and piano wire
- cuts bolts, nails, rivets , etc. up to Ø 5.2 mm
- efficient joint design ensures exceptional cutting performance with li ttle effort
- cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC
- Micro-structured cutting edge reduces slipping of the material from the jaws
- Wit h gripping surface below the joint for gripping and pulling wires from Ø 1.0 mm
- with slim mu lti-component grips without collar for better handling and easier transport
- with large conta ct surface on the handles for better allotment of pressure and more comfort at work
- pliers w ith tether attachment point for mounting a fall protection system
- Clever stripping: large capacity range, sharply ground stripping profiles and intuitive posi tioning
- Innovative cutting geometry: easier cutting, especially of flat cables
- Hybri d design: as flat as needle-nose pliers, as wide as combination pliers for high stability with good accessibility
- Precisely ground stripping profiles for solid conductors from 0.75 - 6 mm² and fine-stranded conductors from 0.5 - 4 mm²
- Precise positioning of the wire thanks to locatio n ridges
- Easy cutting of copper and aluminium cables up to Ø 15 mm (1/2")
- Wide, cros s-hatched gripping surfaces for twisting wires
- Milled groove for secure holding and pulling of small work pieces such as nails
- Convex gripping surface on one side for secure gripping o f flat material and gripping area for round material
- Outer edges for deburring pipes
Product dimensions: 382 x 98 x 19 mm (LxWxD)
Application: For high torque transfer with minimal effort.
Handle: Wiha Classic T-handle.
Blade: Chrome-vanadium steel, through hardened, nickel-plated.
Overlength with reinforced blade.
Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 385 x 135 x 50 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.
Hammer face diameter 50 mm
Medium hard
GS tested safety
Hickory-wood handle and hammer faces available separately as spare parts
Especially on delicate surfaces, choosing the right hammer is crucial to avoid damage. The recoilless, soft-faced hammer with hickory-wood handle makes it possible for the user to deliver measured positioning blows and protects delicate surfaces and edges due to its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. In addition, the approx. 25% greater mass of the hammer head ensures added power and easier work, optimum impact effect, and less effort needed as a result. The hammer also stands out thanks to its high-grade hickory-wood handle with a highly effective non-slip surface. The yellow, medium-hard hammer faces with a diameter of 50 mm are ideal for universal use in areas like tool making and mechanical engineering as well as sheet metal and assembly work. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.
GS tested.
Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Product dimensions: 305 x 125 x 40 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.
Extra: With cast iron balls inside the hammer head for recoilless work.
Choosing the right hammer is particularly important on sensitive surfaces to prevent damage. With its steel tube handle, the no-recoil soft-faced hammer allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. Around 25% more hammer head mass ensures additional power. The yellow medium-hard hammer faces are ideal for universal use in areas such as tool and machine engineering as well as sheet metal and assembly work. The hammer is also impressive due to its steel tube handle with ergonomic, non-slip grip. Each hammer head is available individually as a spare part.
Meets your requirements: Blue hammer head / soft: e.g. for furniture work and interior decorating, minor assembly. Black hammer head / medium soft: e.g. for paving, tiling, dry wall construction.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 400 x 150 x 69 mm (LxWxD)
Depending on the site of operation, different hammer heads are needed to meet the specific requirements of various tasks. The black, medium-soft hammer face is ideal for the paving or tiling trade, as well as for prefabricated house construction. The blue, soft hammer face is suitable for furniture manufacturing and interior decorating, as well as minor assembly work. The recoiling impact effect of the soft-faced hammer reduces the effort required, especially for repeated impacts. At the same time, the safety hammer faces reliably protect the processed material from damage. The safety hammer is also distinguished by its high-grade hickory hammer handle with a particularly effective non-slip surface. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.
GS tested.