Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
All prices are net. Packing, transport and taxes will be charged additionally.
Items: 31620
Order-No.
Information
Wiha Wheel for tool case XXL III 40 mm (44551)Tool Cases and Bags
No. 44551.
Application: For the convenient moving of the tool case XXL III. With the extra large wheel the tool case can also be pulled across rough terrain or up and down stairs.
Spare wheel for the tool case XXL III from Wiha. Contains 1.
Price: EUR 64.95
Wiha Latch for tool case XXL III 24 mm (44552)Tool Cases and Bags
No. 44552.
Application: For locking the tool case XXL III.
Spare latches for the tool case XXL III. Contains 2.
Price: EUR 64.95
Wiha Handle for tool case XXL III 85.5 mm (44554)Tool Cases and Bags
No. 44554.
Application: The handle allows the users to carry the tool case to every type of work location.
Spare handle for the tool case XXL III from Wiha. The handle can be applied at the side of the extendable handle, as well as on the front side. Contains 1.
Price: EUR 64.95
Wiha Socket tester 230 V AC, CAT II (45220)Test meters & tools
No. 45220.
Makes handling easier: Schuko socket with a flexible cable for easier access.
Simplifies your work: Easy error detection via LED display.
Dimensions: 9.0 x 7.5 cm
Application: For testing and error recognition of Schuko sockets, cable drums, and extension cables.
Measuring category: CAT II 300 V
Standards:
Simple testing of Schuko sockets
CAT II, 300 V AC
Simple error recognition
30 cm cable for easy readout
LED display
Was the socket connected correctly? The socket tester from Wiha allows easy testing of Schuko sockets for correct wiring. Errors are clearly indicated by an LED display and allocated to the error source. Thanks to a flexible cable on the Schuko socket, the socket tester from Wiha can also be used in cramped work situations and allows easy reading of the measurement results at all times. In line with the measurement category CAT II up to 300 V, the socket tester from Wiha offers maximum security when working on electrical circuits.
IEC/EN 61010-1, IP40, CE
show more
Price: EUR 64.81
Kraftform Kompakt 25 with pouch, 7 piecesScrew Drivers
No. 05051024001. Kraftform Kompakt 25 with pouch, 7 pieces 1x 889/4 R Rapidaptor Universal Bit Holder: 1/4", x 100 mm 3x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 3x 800/1 Z bits: 0.6x4.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mmWera compact tools enable both manual as well as power tool operations at the same time. The handle/interchangeable blade system in a compact design with various blade tips in the smallest of spaces makes the user more mobile and flexible. Suitable for bits with ¼", hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173) and Wera connecting series 1 and 4. Comes with an adaptor, bayonet and Rapidaptor technology. Kraftform handle with anti-roll feature, multi-component for particularly ergonomic screwdriving. Integrated magazine for bit storage. The telescopic bayonet blade - which can be lowered into the handle - together with the quick-release chuck allows fast manual work even in confined installation situations when the blade is retracted. The blade can be extended by simply actuating the locking sleeve. The bayonet holder can then be used as a fully-fledged screwdriver. The bayonet blade can be removed and used as a power tool adaptor, but can also be retracted once again to its original position. Includes practical belt pouch.05051024001
show more
Price: EUR 65.74
917 SPHS Screwdriver for Phillips screws, PH 2 x 113 mmScrew Drivers
No. 05017041001. 917 SPHS Screwdriver for Phillips screws, PH 2 x 113 mmWera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftfrom handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. The square take-up in the impact cap enables higher torque transfer when screwdriving with the T-handle, Zyklop ratchet or Mini ratchet. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace and handle markings make for simplified finding and sorting of the tool.05017041001
show more
Price: EUR 18.06
932 S/6 Screwdriver set Kraftform Wera: Chiseldriver and racScrew Drivers
No. 05018283001. 932 S/6 Screwdriver set Kraftform Wera: Chiseldriver and rack, 6 pieces 2x 917 SPHS Screwdriver for Phillips screws: PH 1x90 mm, PH 2x113 mm 1x 932 A Screwdriver for slotted screws: 0.6 x 3.5 x 80 mm 3x 932 AS Screwdriver for slotted screws: 0.8x4.5x100 mm, 1x5.5x113 mm, 1.2x7x138 mmWera Chiseldriver for fastening, chiselling and loosening seized screws. Multi-component Kraftform handle for fast and low-fatigue working.<,br>Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for enhanced service life and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. In some cases equipped with a square take-up in the impact cap that enables higher torque transfer when screwdriving with the T-handle, Zyklop ratchet or Mini ratchet. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.05018283001
show more
Price: EUR 64.94
8767 B TORX HF 1 Zyklop bit socket set with holding functionBits, holder, keys, nuts
No. 05003185001. 8767 B TORX® HF 1 Zyklop bit socket set with holding function, 3/8", drive, 6 pieces 6x 8767 B HF TORX® Zyklop bit socket with holding function, 3/8", drive: TX 25x107 mm, TX 27x107 mm, TX 30x107 mm, TX 40x107 mm, TX 45x100 mm, TX 50x100 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mmBit socket with 3/8", drive and holding function for particularly comfortable screwdriving with reduced risk of losing the screw when feeding it into the workpiece. With ",Take it easy", tool finder with colour coding by size - for quick and easy identification of the required tool .05003185001
show more
Price: EUR 65.08
6002 Joker Double Open end wrenches, 24 x 27 x 280 mmWrenches
No. 05020262001. 6002 Joker Double Open end wrenches, 24 x 27 x 280 mmHigh-quality, metric double spanner from Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker! The new generation of double open-ended spanners. For hexagon screw heads and bolts. With holding function by a metal plate in the open end, which reduces the risk of losing screws and sockets. With its extra hard teeth the exchangeable metal plate in the open end secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° avoids time-consuming rotating of the wrench whilst screwdriving. The special forge geometry allows a high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With tool finder Take it easy: colour coding by size.05020262001
show more
Price: EUR 64.97
Bicycle Set 10, 5 piecesBits, holder, keys, nuts
No. 05004178001. Bicycle Set 10, 5 pieces 4x 6003 Joker Combination wrench: 8x115 mm, 9x120 mm, 10x125 mm, 13x160 mm 1x 6003 Joker Pedal Combination wrench: 15 x 174 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm5-piece Joker 6003 spanner set, size 15 in an extra-slim design. As the working space is very narrow when working on your bike, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. The Joker bags are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back.05004178001
show more
Price: EUR 64.77