Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Saves space: Extensive interchangeable bit system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 75 x 7 x 6 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Supplementary information: no slim version
To reach low-lying screws, the blade diameter is often too large in conventional electric screwdrivers. Because removing insulation is not permitted and also compromises the user's safety, protective insulation has been integrated into the blade with the Wiha slimTECHNOLOGY. This has been specially developed for electrical applications, thereby ensuring blades up to 33% slimmer. This means low-lying screw and spring elements can also be easily reached with the slimBits. The insulated slimBits undergo individual piece testing as per the international IEC 60900 standard, *providing users with a tool to work safely on live parts up to 1,000 V AC. 6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).
Manufactured acc. to IEC 60900.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Saves space: Extensive interchangeable bit system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 75 x 7 x 6 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Supplementary information: no slim version
To reach low-lying screws, the blade diameter is often too large in conventional electric screwdrivers. Because removing insulation is not permitted and also compromises the user's safety, protective insulation has been integrated into the blade with the Wiha slimTECHNOLOGY. This has been specially developed for electrical applications, thereby ensuring blades up to 33% slimmer. This means low-lying screw and spring elements can also be easily reached with the slimBits. The insulated slimBits undergo individual piece testing as per the international IEC 60900 standard, *providing users with a tool to work safely on live parts up to 1,000 V AC. 6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).
Manufactured acc. to IEC 60900.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Saves space: Extensive interchangeable bit system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 75 x 7 x 6 mm (LxWxD)
Application: For working on live parts up to 1,000 V AC. Ideal for handling screw and spring elements.
Supplementary information: no slim version
When combined with speedE®, slimVario® and TorqueVario®-S electric tools, the insulated slimBits can effortlessly reach even deep-set screws and spring elements thanks to the Wiha slimTechnology specially developed for electrical applications. This is made possible by the protective insulation fully integrated into the front section of the bit. The slimBits undergo routine individual piece testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Saves space: Extensive interchangeable bit system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 75 x 7 x 6 mm (LxWxD)
Application: For working on live parts up to 1,000 V AC. Ideal for handling screw and spring elements.
When combined with speedE®, slimVario® and TorqueVario®-S electric tools, the insulated slimBits can effortlessly reach even deep-set screws and spring elements thanks to the Wiha slimTechnology specially developed for electrical applications. This is made possible by the protective insulation fully integrated into the front section of the bit. The slimBits undergo routine individual piece testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Saves space: Extensive interchangeable bit system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 75 x 7 x 6 mm (LxWxD)
Application: For working on live parts up to 1,000 V AC. Ideal for handling screw and spring elements.
When combined with speedE®, slimVario® and TorqueVario®-S electric tools, the insulated slimBits can effortlessly reach even deep-set screws and spring elements thanks to the Wiha slimTechnology specially developed for electrical applications. This is made possible by the protective insulation fully integrated into the front section of the bit. The slimBits undergo routine individual piece testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Product dimensions: 164 x 23 x 23 mm (LxWxD)
Application: Particularly suitable for dry applications.
DIN ISO 8764-PH.
Product dimensions: 125 x 94 x 19 mm (LxWxD)
Application: For comfortable high torque transfer and to insert and remove screws from holes. Especially useful for loosening or tightening screws that are hard to move.
Blade: Chrome-vanadium steel, through hardened, chrome-plated.
Ergonomic and powerful fastening
2in1 - T-handle with added wrench function
Long service life and reliability due to optimal material rigidity
Nonmagnetic holding feature
The Wiha Comfort grip T-handle L-key with side drive is the tool to use when you need to apply high torques comfortably. Thanks to its ergonomic handle design with integrated soft zones, the T-handle is perfectly sized in the hand. Fewer pressure surfaces and less stress on muscles makes working with this tool a pleasure. Thanks to the one-piece blade, the integrated side drive is able to withstand maximum stress loads and enables users to undo and tighten screwed connections which have rusted, become stuck or fastened really tightly. The free hand resting on the handle ensures added stability, preventing the blade from slipping out of the screw head suddenly and thus protecting the screw and blade from damage. The MagicRing® of spring steel (from size 3 mm) secures all hex standard screws independently of screw material in any position.
Wiha
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Saves time: Wiha MagicSpring® holding feature holds all Torx® screws in place without a magnet.
Product dimensions: 110 x 8 x 8 mm (LxWxD)
Application: For controlled fastening with a pre-set torque, in combination with a torque tool Wiha easyTorque Key.
Extra: Thanks to the holding feature MagicSpring® with its spring steel ring, the interchangeable blade holds all screws TORX® perfectly firmly in any position without any magnets.
Are you looking for controlled screw tightening without material damage and with high process safety? No problem with the torque screwdriver with key handle set easyTorque Key in combination with the interchangeable blade set. The long interchangeable blades allow even hard-to-reach screws to be tightened due to the narrow blade diameter. Made of high-quality chrome vanadium molybdenum steel, the blades are distinguished by their longevity and robustness.
Use in combination with the torque tools easyTorque Key from Wiha.
Wiha
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Saves time: Wiha MagicSpring® holding feature holds all Torx® screws in place without a magnet.
Product dimensions: 110 x 8 x 8 mm (LxWxD)
Application: For controlled fastening with a pre-set torque, in combination with a torque tool Wiha easyTorque Key.
Extra: Thanks to the holding feature MagicSpring® with its spring steel ring, the interchangeable blade holds all screws TORX® perfectly firmly in any position without any magnets.
Are you looking for controlled screw tightening without material damage and with high process safety? No problem with the torque screwdriver with key handle set easyTorque Key in combination with the interchangeable blade set. The long interchangeable blades allow even hard-to-reach screws to be tightened due to the narrow blade diameter. Made of high-quality chrome vanadium molybdenum steel, the blades are distinguished by their longevity and robustness.
Use in combination with the torque tools easyTorque Key from Wiha.
Wiha
Increases your efficiency: Extra slim blade geometry is particularly suitable for applications with confined narrow access.
Saves time: Wiha MagicSpring® holding feature holds all Torx® screws in place without a magnet.
Product dimensions: 110 x 8 x 8 mm (LxWxD)
Application: For controlled fastening with a pre-set torque, in combination with a torque tool Wiha easyTorque Key.
Extra: Thanks to the holding feature MagicSpring® with its spring steel ring, the interchangeable blade holds all screws TORX® perfectly firmly in any position without any magnets.
Are you looking for controlled screw tightening without material damage and with high process safety? No problem with the torque screwdriver with key handle set easyTorque Key in combination with the interchangeable blade set. The long interchangeable blades allow even hard-to-reach screws to be tightened due to the narrow blade diameter. Made of high-quality chrome vanadium molybdenum steel, the blades are distinguished by their longevity and robustness.
Use in combination with the torque tools easyTorque Key from Wiha.