Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Simplifies your work: Striking cap integrated into the handle allows you to strike and lift with the screwdriver.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Makes handling easier: Easy loosening of tight screws thanks to hex bolster for spanners.
Increases your safety: Anti-slip handle simplifies work in oily and wet application areas.
Product dimensions: 187 x 30 x 30 mm (LxWxD)
Application: Best suited for turning screws in wet and oily applications.
DIN ISO 8764-PH.
Product dimensions: 140 x 11 x 5 mm (LxWxD)
Application: Universal tweezers for all current electronics applications.
Design: Surface resistance 10^6 - 10^9 ohms.
Material: Special alloyed, non-rusting, chromium-nickel stainless steel.
IEC 61340-5-1.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.
Product dimensions: 268 x 36 x 36 mm (LxWxD)
Application: For fastening and unfastening internal square-drive (Robertson) screws.
Manufactured acc. to IEC 60900.
Increases your efficiency: Good access to confined spaces due to extremely short screwdriver handle.
Saves space: Six tools in one.
Product dimensions: 65 x 37 x 37 mm (LxWxD)
Drive: DIN 3126, ISO 1173, style D 6.3.
Application: Eminently suitable for working in confined, hard-to-reach spaces.
Perfect for confined spaces
Compact and space-saving
Magnetic bit chuck
Convenient bit storage in the handle
The Stubby magazine bit holder contains bits in its handle. If you remove the cap on the end of the SoftFinish® multi-component handle, six 25 mm bits appear, designed for all standard screw fastenings. The magazine bit holder is thus flexible in its use and an attractive alternative to screwdriver sets, especially for portable use. The magnetic holding feature in the integrated bit holder ensures easy handling and an optimum grip. The practical, compact size sets the Stubby bit magazine apart as a specialized tool for working in highly confined spaces.
Content:
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
Increases your efficiency: Good access to confined spaces due to extremely short screwdriver handle.
Saves space: Six tools in one.
Product dimensions: 65 x 37 x 37 mm (LxWxD)
Drive: DIN 3126, ISO 1173, style D 6.3.
Application: Eminently suitable for working in confined, hard-to-reach spaces.
Perfect for confined spaces
Compact and space-saving
Magnetic bit chuck
Convenient bit storage in the handle
Fastening by hand becomes problematic when you can no longer reach screws in confined spaces with a long screwdriver handle. The screwdriver with the Stubby bit magazine provides the remedy in such cases - it really stands out as a specialist for working in tight spots thanks to its handy, compact size. The Multitool also holds its six bits in the most commonly used profiles in its handle, thus making it flexible in its use. The magazine bit holder offers particular appeal as an alternative to screwdriver sets for portable use and fits snugly into pockets. The magnetic holding feature in the integrated bit holder ensures easy handling and an optimum grip.
Content:
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T10 (01716)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T40 (01722)
Increases your efficiency: Good access to confined spaces due to extremely short screwdriver handle.
Saves space: Six tools in one.
Product dimensions: 65 x 37 x 37 mm (LxWxD)
Drive: DIN 3126, ISO 1173, style D 6.3.
Application: Eminently suitable for working in confined, hard-to-reach spaces.
Perfect for confined spaces
Compact and space-saving
Magnetic bit chuck
Convenient bit storage in the handle
Fastening by hand becomes problematic when you can no longer reach screws in confined spaces with a long screwdriver handle. The screwdriver with the Stubby bit magazine provides the remedy in such cases - it really stands out as a specialist for working in tight spots thanks to its handy, compact size. The Multitool also holds its six bits in the most commonly used profiles in its handle, thus making it flexible in its use. The magazine bit holder offers particular appeal as an alternative to screwdriver sets for portable use and fits snugly into pockets. The magnetic holding feature in the integrated bit holder ensures easy handling and an optimum grip.
Content:
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 6.5 mm (01626)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 8.0 mm (01627)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.
Product dimensions: 236 x 30 x 30 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs
Wiha handle size concept - powerful and sensitive fastening
slimBits allow access to low-lying screws thanks to inserted insulation
Safe operation up to 1,000 V AC
Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish® screwdriver provides a remedy, ensuring optimal transmission of hand force. The long, slender handle sizes can be used to fasten small screws quickly and firmly. There are also large handle sizes to fasten large screws which can be used to apply greater torques. The various handle sizes have also been matched to the consistently same-sized hand of screw-fastening professionals. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. Protective insulation has been integrated into the blade with the Wiha slimTECHNOLOGY specially developed for electric applications, thus ensuring blades which are up to 33% slimmer. This means low-lying screw and spring elements can also be easily reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, as a result * providing users with a tool to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Simplifies your work: Unrestricted access to low-lying screws thanks to bit holder lengths of up to 250mm.
Increases your efficiency: Unlimited access to deep-set screws thanks to extreme slimline design.
Product dimensions: 200 x 10 x 10 mm (LxWxD)
Standards: for bits DIN 3126, ISO 1173, shape C6.3
DIN 3126, ISO 1173, Style E6,3
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.
Product dimensions: 211 x 30 x 30 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Material: Chrome-vanadium-molybdenum steel, black finish, insulated
Standards: DIN ISO 8764-PH.
Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs
Wiha handle size concept - powerful and sensitive fastening
slimBits allow access to low-lying screws thanks to inserted insulation
Safe operation up to 1,000 V AC
Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish® screwdriver provides a remedy, ensuring optimal transmission of hand force. The different handle heights are always matched to the fastening. The long, slender handle heights can be used to fasten small screws quickly and firmly. There are also large-volume handle heights to fasten large screws which can be used to apply greater torques. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. With the Wiha slimTECHNOLOGY specially developed for electric applications, the protective insulation has been integrated into the blade, thus allowing blades which are up to 33% slimmer. This means low-lying screw and spring elements can easily be reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC.
VDE and GS tested
Manufactured acc. to IEC 60900.
Product dimensions: 151 x 47 x 30 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs
Wiha handle size concept - powerful and sensitive fastening
slimBits allow access to low-lying screws thanks to inserted insulation
Safe operation up to 1,000 V AC
Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish® screwdriver provides a remedy, ensuring optimal transmission of hand force. The long, slender handle sizes can be used to fasten small screws quickly and firmly. There are also large handle sizes to fasten large screws which can be used to apply greater torques. The various handle sizes have also been matched to the consistently same-sized hand of screw-fastening professionals. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. Protective insulation has been integrated into the blade with the Wiha slimTECHNOLOGY specially developed for electric applications, thus ensuring blades which are up to 33% slimmer. This means low-lying screw and spring elements can also be easily reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, as a result * providing users with a tool to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.