Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Meets your requirements: Permanently stable through box joint with double guidance.
Increases your efficiency: Fast and simple adjustment of pliers with push button.
Product dimensions: 320 x 300 x 32 mm (LxWxD)
Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.
Material: High quality chrome vanadium molybdenum steel, tempered.
Turning, pulling, gripping and holding of e.g. pipes or tightening screws and nuts
9-level gradation - flexible adjustment of the gripping width at the push of a button
Secure hold on the workpiece thanks to self-clamping
Highest stability thanks to a box type joint
Kind to hands and muscles
Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer an optimum grip for all occasions. With a 9-step detent adjustment, it offers maximum variability for work in the installation area, where it can be quickly and easily adjusted and locked at the push of a button. Crushing injuries are prevented thanks to the integrated clamping protection. The pliers are equipped with a box-type joint, which ensures maximum stability due to the double guidance. At the same time, the slim design in the head and joint areas provides easy access to the workpiece, even in confined work areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. What's more, the ergonomically shaped pliers handle ensures comfortable, fatigue-proof work. In addition, slipping off the work piece is prevented by self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable, secure grip with long-term durability. The high-quality chrome vanadium molybdenum steel guarantees robustness and a long service life. The robust water pump pliers are dirt-resistant.
To benefit from this product for as long as possible, we recommend regularly applying a drop of oil after use.
DIN ISO 8976.
Product dimensions: 270 x 100 x 39 mm (LxWxD)
Application: Gripping and holding as well as cutting soft and hard wires and cables. Preferred choice in the mechanical sector.
DIN ISO 5745.
Simplifies your work: Larger handle - maximum power.
Increases your efficiency: 90% less volume, 80% less weight - 100% efficiency.
Increases your flexibility: Standard bits are also suitable for machine operation.
Protects your health: No risk of injury, *all bits stowed safely inside the handle.
Product dimensions: 210 x 39 x 39 mm (LxWxD)
Application: The alternative to a set of screwdrivers. Ideal for screw fastening when out on jobs.
Large handle - maximum power
Clearly arranged and easy to remove
Magnetic bit chuck
12 drives in one tool
25 mm standard bits for manual and machine operation
It's not uncommon for tradesmen out on jobs to need a screwdriver with a specific profile but not have the precise one within reach when they need it. The Wiha screwdriver with the LiftUp 25 bit magazine puts an end to such problems, because with only one tool you have 12 different drives at hand anytime, anywhere. LiftUp thus replaces an entire screwdriver set. At the press of a button, the bit magazine at the handle end comes out, delivering the 25 mm bits with a 1/4" drive ready for removal. The contained standard bits can be used for both manual and machine operation. Thanks to its large volume, the ergonomically shaped two-component handle ensures optimum power transmission and maximum torque values. Powerful screw fastening or loosening is therefore particularly easy for the hand.
Content:
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 6.5 mm (01626)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
Protects your health: Special DynamicJoint® design reduces effort required for cutting.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 250 x 100 x 32 mm (LxWxD)
Application: For cutting cables as well as soft and hard wires. For working on live parts up to 1,000 V AC.
Precise and clean cutting of soft and hard wire
DynamicJoint® - Innovative unique joint design
Kind to hands and muscles
Safe operation up to 1,000 V AC
A tradesman's tool kit would be incomplete without a universal cutter to cut hard and soft wires. The diagonal cutters Professional electric by Wiha prove themselves to be robust, all-rounder pliers. The pliers joint with DynamicJoint® ensures that the hand force is optimally transferred to the cutting edges, providing up to 20% greater cutting force. With their semi-circular head, these precision pliers also provide a clean cut edge. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. The high-quality chrome-plated plier surface also provides protection against rust, ensuring the pliers have a long service life. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life. The insulated diagonal cutters are subject to routine testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
