Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Simplifies your work: All tools securely arranged in a robust, orderly bag.
Increases your efficiency: Extensive interchangeable blade system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Application: For screw fastening on live parts up to 1,000 V AC.
Kind to hands and muscles
Recommended by doctors and therapists from the German Campaign for Healthier Backs
Safe operation up to 1,000 V AC
slimBits allow access to low-lying screws thanks to integrated insulation
Versatile use
Electricians are often faced with different screw profiles when working on live parts during their daily work. With the SoftFinish® screwdriver handle, including interchangeable slimBits, multiple applications can be covered without having to carry a separate screwdriver for each profile. The ergonomically shaped screwdriver handle with roll-off protection fits perfectly in the hand, protecting joints and tendons as users work. Thanks to Wiha slimTechnology, the contained slimBit blades are up to 33% slimmer and can thus * easily reach deep-set screw and spring elements. The insulated screwdriver handle and * slimBits undergo routine individual piece testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Content:
- 1x Screwdriver with bit holder SoftFinish® electric slimVario Stubby 6.0 mm (41229)
- 1x Screwdriver with bit holder SoftFinish® electric slimVario for slimBits 6.0 mm (34577)
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
- 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
- 1x Folding bag
Simplifies your work: All tools securely arranged in a robust, orderly bag.
Increases your efficiency: Extensive interchangeable blade system saves you space.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Application: For screw fastening on live parts up to 1,000 V AC.
Kind to hands and muscles
Recommended by doctors and therapists from the German Campaign for Healthier Backs
Safe operation up to 1,000 V AC
slimBits allow access to low-lying screws thanks to integrated insulation
Versatile use
Electricians are often faced with different screw profiles when working on live parts during their daily work. With the SoftFinish® screwdriver handle, including interchangeable slimBits, multiple applications can be covered without having to carry a separate screwdriver for each profile. The ergonomically shaped screwdriver handle with roll-off protection fits perfectly in the hand, protecting joints and tendons as users work. Thanks to Wiha slimTechnology, the contained slimBit blades are up to 33% slimmer and can thus * easily reach deep-set screw and spring elements. The insulated screwdriver handle and * slimBits undergo routine individual piece testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Content:
- 1x Screwdriver with bit holder SoftFinish® electric slimVario Stubby 6.0 mm (41229)
- 1x Screwdriver with bit holder SoftFinish® electric slimVario for slimBits 6.0 mm (34577)
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
- 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
- 1x Folding bag
Increases your flexibility: Variably adjustable right or left rotation through switching lever.
Simplifies your work: With a convenient foam insert for clearly structured storage.
Increases your efficiency: Fastening without interruption thanks to a finely toothed ratchet wrench.
Meets your requirements: Precise fitting, robust, and easy to clean.
Dimensions: 280x197x32 mm
Application: For installation and mounting work.
Tightening and loosening strongly tightened hex screws and nuts requires an enormous amount of force. With the nut driver inserts from Wiha the user can easily open any fastening. Every user is excellently equipped with the set consisting of the 18 most popular 3/8" nut driver inserts size 6-24 mm, a ratchet wrench, and three extensions. The included ratchet wrench combined with the selection of nut drivers gives users the required flexibility for their work. When working with the ratchet wrench, the user benefits from the fine toothing with 72 teeth, offering a short return angle. The right or left rotation can be variably adjusted by the integrated switching lever. The combination with the included extensions allow them to conveniently reach deep-set screws and nuts. The nut driver and extensions are mechanically locked. The change is initiated by pressing the activation button. Made of high quality chrome vanadium steel, the nut driver inserts are distinguished by their longevity and robustness, not the least thanks to their corrosion-resistant and easy to clean surface. The entire contents of the set are neatly and clearly stored in a foam insert in which markings help find the suitable nut driver.
Based on DIN 3120 / 3122 / 3124
Content:
- 1x 3/8" x 178 mm (44686)
- 1x Nut driver insert 3/8" double hex 6.0 mm x 28 mm (44690)
- 1x Nut driver insert 3/8" double hex 7.0 mm x 28 mm (44691)
- 1x Nut driver insert 3/8" double hex 8.0 mm x 28 mm (44692)
- 1x Nut driver insert 3/8" double hex 9.0 mm x 28 mm (44693)
- 1x Nut driver insert 3/8" double hex 10.0 mm x 28 mm (44694)
- 1x Nut driver insert 3/8" double hex 11.0 mm x 28 mm (44695)
- 1x Nut driver insert 3/8" double hex 12.0 mm x 28 mm (44696)
- 1x Nut driver insert 3/8" double hex 13.0 mm x 28 mm (44697)
- 1x Nut driver insert 3/8" double hex 14.0 mm x 28 mm (44698)
- 1x Nut driver insert 3/8" double hex 15.0 mm x 28 mm (44699)
- 1x Nut driver insert 3/8" double hex 16.0 mm x 28 mm (44700)
- 1x Nut driver insert 3/8" double hex 17.0 mm x 28 mm (44701)
- 1x Nut driver insert 3/8" double hex 18.0 mm x 28 mm (44702)
- 1x Nut driver insert 3/8" double hex 19.0 mm x 28 mm (44703)
- 1x Nut driver insert 3/8" double hex 20.0 mm x 30 mm (44704)
- 1x Nut driver insert 3/8" double hex 21.0 mm x 30 mm (44705)
- 1x Nut driver insert 3/8" double hex 22.0 mm x 30 mm (44706)
- 1x Nut driver insert 3/8" double hex 24.0 mm x 30 mm (44707)
- 1x Extension 3/8" for nut driver inserts 75 mm (44687)
- 1x Extension 3/8" for nut driver inserts 150 mm (44688)
- 1x Extension 3/8" for nut driver inserts 250 mm (44689)
- 1x Foam insert
Wiha
Increases your efficiency: Fastening without interruption thanks to a finely toothed ratchet wrench.
Increases your flexibility: Adjustable right or left rotation through switching lever.
Application: For installation and mounting work.
Non-slip ergonomic handle
Protects the fingers thanks to its cropped design
Perfect for confined spaces thanks to its fine toothing
Quick release detent retaining ball at the push of a button
Tightening and loosening strongly tightened hex screws and nuts requires an enormous amount of force. With the reversible ratchet from Wiha users can easily open and close any screw connection. Thanks to the non-slip two-component handle work is particularly ergonomic and comfortable. The compact ratchet head additionally allows working in confined spaces. The cropped design ensures an elevated holding position, which supports a powerful grip and protects the fingers from injury. The finely serrated ratchet with 72 teeth also has a short return angle of 5° that also enables work in the tightest of spaces. Using a switching lever, right or left rotation can be easily adjusted. The robust reversible ratchet allows safe working and can withstand loads far beyond the DIN requirements up to a torque of 93 Nm. The push button on the ratchet head releases the detent retaining ball and serves the easy and quick replacement of box nuts or adapters. Made of high quality chrome vanadium steel, the reversible ratchet is distinguished by its longevity and robustness.
Based on DIN 3122/ISO 331.
Stahlwille
