Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- immediately adheres to metal, rubber, plastic
- for all electrical insulation (non-conductive)
- is chemically inert, inactive and non-toxic - excellent creep ability - resistant to steam and chemicals
- neutral to rubber and plastics
- Temperature range from -60 ° C to + 240 ° C (briefly + 290 ° C)
NLGI class: 2
Density at 20 ° C: 1.1 g / m³
Simplifies your work: The ball end facilitates access to screws and allows you to work at an angle of up to 25°.
Lowers your costs: Highly durable thanks to high-quality, chrome-plated L-key surface to prevent corrosion.
Facilitates handling: Always the correct key when you need it.
Saves time: Ensures order: removing and targeted insertion in the holder is child’s play.
Increases your efficiency: Wiha MagicRing® holding feature holds all hex screws in place without a magnet.
It's a common experience. It's not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates them in an ingenious way. Turning one L-key in the holder makes all other keys turn to the side at the same angle, enabling you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. Thanks to the stainless steel MagicRing® screw-holding spring, the L-keys hold all standard hex screws firmly in any position perfectly no matter what the screw is made of. This ensures that removing sunken screws or inserting and fastening a screw at an angle down to 25° is an extremely simple task.
Standards: Based on ISO 2936L.
Application: Ideal for removing standard countersunk screws and inserting and fastening in horizontal, inclined or deep tapped blind holes.
- 1 x L-keys Hexagonal ball end MagicRing® matt chrome-plated (20549) 3 x 128 mm, 23 mm
- 1 x L-keys Hexagonal ball end MagicRing® matt chrome-plated (20550) 4 x 142 mm, 29 mm
- 1 x L-keys Hexagonal ball end MagicRing® matt chrome-plated (20551) 6 x 184 mm, 38 mm
- 1 x L-keys Hexagonal ball end MagicRing® matt chrome-plated (20552) 8 x 206 mm, 44 mm
- 1 x L-keys Hexagonal ball end MagicRing® matt chrome-plated (20553) 10 x 231 mm, 50 mm
- 1 x L-keys Hexagonal ball end MagicRing® matt chrome-plated (20570) 5 x 163 mm, 33 mm
- 1 x L-keys Hexagonal ball end matt chrome-plated (01392) 1,5 x 91 mm, 15 mm
- 1 x L-keys Hexagonal ball end matt chrome-plated (01393) 2 x 101 mm, 18 mm
- 1 x L-keys Hexagonal ball end matt chrome-plated (01395) 2,5 x 113 mm, 20 mm
Part list
Product dimensions: 99 x 63 x 17 mm (LxWxD)
DIN 3126, ISO 1173, Style C6,3
Content:
- 1x Bit Standard 25 mm TORX® Tamper Resistant (with hole) 1/4" C6,3 T7H (03115)
- 1x Bit Standard 25 mm TORX® Tamper Resistant (with hole) 1/4" C6,3 T8H (03117)
- 1x Bit Standard 25 mm TORX® Tamper Resistant (with hole) 1/4" C6,3 T9H (01726)
- 1x Bit Standard 25 mm TORX® Tamper Resistant (with hole) 1/4" C6,3 T10H (01727)
- 2x Bit Standard 25 mm TORX® Tamper Resistant (with hole) 1/4" C6,3 T15H (01728)
- 2x Bit Standard 25 mm TORX® Tamper Resistant (with hole) 1/4" C6,3 T20H (01729)
- 2x Bit Standard 25 mm TORX® Tamper Resistant (with hole) 1/4" C6,3 T25H (01730)
- 1x Bit Standard 25 mm TORX® Tamper Resistant (with hole) 1/4" C6,3 T30H (01732)
- 1x Bit Standard 25 mm TORX® Tamper Resistant (with hole) 1/4" C6,3 T40H (01733)
- 1x Bit holder magnetic 58 mm 1/4" (01895)
- 1x FlipSelector
Knipex
