Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Important: TORX PLUS® keys cannot be used with TORX® screws.
Application: For high torque transfer with minimal effort.
Extra: The stronger profile of the TORX PLUS® tip allows up to 25% extra torque than the TORX® profile.
Extra: ChromTop® blade tip for the highest accuracy.
Handle: Wiha Classic T-handle.
Blade: Chrome-vanadium steel, through hardened, chrome-plated.
Simplifies your work: More power when fastening thanks to the leverage from the T-handle design
Increases your efficiency: Handle size concept for an optimum balance between torque and control
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For hex socket screws.
Manufactured acc. to IEC 60900.
Handle: Made of impact resistant cellulose acetate.
Blade: Octagonal profile with drilled tip, through hardened, zinc-plated.
Simplifies your work: Striking cap integrated into the handle allows you to strike and lift with the screwdriver.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Makes handling easier: Easy loosening of tight screws thanks to hex bolster for spanners.
Increases your safety: Anti-slip handle simplifies work in oily and wet application areas.
Application: Best suited for turning screws in wet and oily applications.
DIN ISO 8764-PH.
Application: Universal tweezers for all current electronics applications.
Design: Surface resistance 10^6 - 10^9 ohms.
Material: Special alloyed, non-rusting, chromium-nickel stainless steel.
IEC 61340-5-1.
Increases your efficiency: Good access to confined spaces due to extremely short screwdriver handle.
Saves space: Six tools in one.
Drive: DIN 3126, ISO 1173, style D 6.3.
Application: Eminently suitable for working in confined, hard-to-reach spaces.
Fastening by hand becomes problematic when you can no longer reach screws in confined spaces with a long screwdriver handle. The screwdriver with the Stubby bit magazine provides the remedy in such cases - it really stands out as a specialist for working in tight spots thanks to its handy, compact size. The Multitool also holds its six bits in the most commonly used profiles in its handle, thus making it flexible in its use. The magazine bit holder offers particular appeal as an alternative to screwdriver sets for portable use and fits snugly into pockets. The magnetic holding feature in the integrated bit holder ensures easy handling and an optimum grip.
Content:
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T10 (01716)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T40 (01722)
Increases your efficiency: Good access to confined spaces due to extremely short screwdriver handle.
Saves space: Six tools in one.
Drive: DIN 3126, ISO 1173, style D 6.3.
Application: Eminently suitable for working in confined, hard-to-reach spaces.
Fastening by hand becomes problematic when you can no longer reach screws in confined spaces with a long screwdriver handle. The screwdriver with the Stubby bit magazine provides the remedy in such cases - it really stands out as a specialist for working in tight spots thanks to its handy, compact size. The Multitool also holds its six bits in the most commonly used profiles in its handle, thus making it flexible in its use. The magazine bit holder offers particular appeal as an alternative to screwdriver sets for portable use and fits snugly into pockets. The magnetic holding feature in the integrated bit holder ensures easy handling and an optimum grip.
Content:
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 6.5 mm (01626)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 8.0 mm (01627)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.
Application: For work in the area of live parts up to 1,000 V AC.
Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish® screwdriver provides a remedy, ensuring optimal transmission of hand force. The long, slender handle sizes can be used to fasten small screws quickly and firmly. There are also large handle sizes to fasten large screws which can be used to apply greater torques. The various handle sizes have also been matched to the consistently same-sized hand of screw-fastening professionals. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. Protective insulation has been integrated into the blade with the Wiha slimTECHNOLOGY specially developed for electric applications, thus ensuring blades which are up to 33% slimmer. This means low-lying screw and spring elements can also be easily reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, as a result * providing users with a tool to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Simplifies your work: The ball end facilitates access to screws and allows you to work at an angle of up to 25°.
Increases your efficiency: The colored L-keys are quick and easy to find. Thanks to their luminescent paint, they can even be retrieved in the dark with the Wiha flashlight with UV light function. This means it takes less time to find lost L-keys, while the risk of machine damage due to tools left inside machines is minimized. The hexagonal ball end of the L-keys enables users to fasten and unfasten effortlessly at an angle of up to 25°.
Lowers your costs: Reduces the risk of forgetting and leaving keys inside a machine and causing damage.
Application: Ideal for fastening screws in difficult-to-access spots and fastening into horizontal, inclined or deep tapped blind holes.
The colored L-keys are quick and easy to find. Thanks to their luminescent paint, they can even be retrieved in the dark with the Wiha flashlight with UV light function. This means it takes less time to find lost L-keys, while the risk of machine damage due to tools left inside machines is minimized. The hexagonal ball end of the L-keys enables users to fasten and unfasten effortlessly at an angle of up to 25°.
Increases your efficiency: Wiha MagicRing® holding feature holds all hex screws in place without a magnet.
Increases your efficiency: The required key width can be quickly found thanks to colour coding.
Application: Ideal for fastening all hex screws, removing standard countersunk screws as well as inserting and screwing into horizontal, inclined or deep tapped blind holes.
The colored L-keys are quick and easy to find. Thanks to their luminescent paint, they can even be retrieved in the dark with the Wiha flashlight with UV light function. This means it takes less time to find lost L-keys, while the risk of machine damage due to tools left inside machines is minimized. The hexagonal ball end of the L-keys enables users to fasten and unfasten effortlessly at an angle of up to 25°.
Based on ISO 2936L.