Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Simplifies your work: Equipped with just one TORX® profile for all types of use.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.
Product dimensions: 243 x 36 x 36 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs
Wiha handle size concept - powerful and sensitive fastening
slimBits allow access to low-lying screws thanks to inserted insulation
Safe operation up to 1,000 V AC
Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish® screwdriver provides a remedy, ensuring optimal transmission of hand force. The different handle heights are always matched to the fastening. The long, slender handle heights can be used to fasten small screws quickly and firmly. There are also large-volume handle heights to fasten large screws which can be used to apply greater torques. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. With the Wiha slimTECHNOLOGY specially developed for electric applications, the protective insulation has been integrated into the blade, thus allowing blades which are up to 33% slimmer. This means low-lying screw and spring elements can easily be reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Wiha
Simplifies your work: Equipped with just one TORX® profile for all types of use.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.
Product dimensions: 243 x 36 x 36 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs
Wiha handle size concept - powerful and sensitive fastening
slimBits allow access to low-lying screws thanks to inserted insulation
Safe operation up to 1,000 V AC
Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish® screwdriver provides a remedy, ensuring optimal transmission of hand force. The different handle heights are always matched to the fastening. The long, slender handle heights can be used to fasten small screws quickly and firmly. There are also large-volume handle heights to fasten large screws which can be used to apply greater torques. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. With the Wiha slimTECHNOLOGY specially developed for electric applications, the protective insulation has been integrated into the blade, thus allowing blades which are up to 33% slimmer. This means low-lying screw and spring elements can easily be reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Wiha
Simplifies your work: Equipped with just one TORX® profile for all types of use.
Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slim blades ensure unlimited, protected access to deep-set screws.
Product dimensions: 243 x 36 x 36 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs
Wiha handle size concept - powerful and sensitive fastening
slimBits allow access to low-lying screws thanks to inserted insulation
Safe operation up to 1,000 V AC
Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish® screwdriver provides a remedy, ensuring optimal transmission of hand force. The different handle heights are always matched to the fastening. The long, slender handle heights can be used to fasten small screws quickly and firmly. There are also large-volume handle heights to fasten large screws which can be used to apply greater torques. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. With the Wiha slimTECHNOLOGY specially developed for electric applications, the protective insulation has been integrated into the blade, thus allowing blades which are up to 33% slimmer. This means low-lying screw and spring elements can easily be reached. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Protects your material: Fully insulated tool reduces the risk of short circuits.
Product dimensions: 42 x 18 x 18 mm (LxWxD)
Application: Safe installation of terminals and sleeves, conductor connections and fastening of conductor lines. For work in the area of live parts up to 1,000 V AC.
Safety is the top priority when users are working on live parts. The insulated nut driver inserts from Wiha are the ideal tool for working on electrical systems. Combined with the insulated ratchet wrench or T-handle adapter, the nut driver inserts can be used for tightening and loosening hex screws. The insulated nut driver inserts undergo individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC. The fully insulated tools prevent potential short circuits caused by unintentional contact, even in confined working environments.
Only compatible with insulated ratchet wrench, cross-handle adapter and adapter slimVario® electric from Wiha.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Protects your material: Fully insulated tool reduces the risk of short circuits.
Product dimensions: 42 x 18 x 18 mm (LxWxD)
Application: Safe installation of terminals and sleeves, conductor connections and fastening of conductor lines. For work in the area of live parts up to 1,000 V AC.
Safety is the top priority when users are working on live parts. The insulated nut driver inserts from Wiha are the ideal tool for working on electrical systems. Combined with the insulated ratchet wrench or T-handle adapter, the nut driver inserts can be used for tightening and loosening hex screws. The insulated nut driver inserts undergo individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC. The fully insulated tools prevent potential short circuits caused by unintentional contact, even in confined working environments.
Only compatible with insulated ratchet wrench, cross-handle adapter and adapter slimVario® electric from Wiha.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Protects your material: Fully insulated tool reduces the risk of short circuits.
Product dimensions: 42 x 18 x 18 mm (LxWxD)
Application: Safe installation of terminals and sleeves, conductor connections and fastening of conductor lines. For work in the area of live parts up to 1,000 V AC.
Safety is the top priority when users are working on live parts. The insulated nut driver inserts from Wiha are the ideal tool for working on electrical systems. Combined with the insulated ratchet wrench or T-handle adapter, the nut driver inserts can be used for tightening and loosening hex screws. The insulated nut driver inserts undergo individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC. The fully insulated tools prevent potential short circuits caused by unintentional contact, even in confined working environments.
Only compatible with insulated ratchet wrench, cross-handle adapter and adapter slimVario® electric from Wiha.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Protects your material: Fully insulated tool reduces the risk of short circuits.
Product dimensions: 42 x 18 x 18 mm (LxWxD)
Application: Safe installation of terminals and sleeves, conductor connections and fastening of conductor lines. For work in the area of live parts up to 1,000 V AC.
Safety is the top priority when users are working on live parts. The insulated nut driver inserts from Wiha are the ideal tool for working on electrical systems. Combined with the insulated ratchet wrench or T-handle adapter, the nut driver inserts can be used for tightening and loosening hex screws. The insulated nut driver inserts undergo individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC. The fully insulated tools prevent potential short circuits caused by unintentional contact, even in confined working environments.
Only compatible with insulated ratchet wrench, cross-handle adapter and adapter slimVario® electric from Wiha.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Protects your material: Fully insulated tool reduces the risk of short circuits.
Product dimensions: 42 x 18 x 18 mm (LxWxD)
Application: Safe installation of terminals and sleeves, conductor connections and fastening of conductor lines. For work in the area of live parts up to 1,000 V AC.
Safety is the top priority when users are working on live parts. The insulated nut driver inserts from Wiha are the ideal tool for working on electrical systems. Combined with the insulated ratchet wrench or T-handle adapter, the nut driver inserts can be used for tightening and loosening hex screws. The insulated nut driver inserts undergo individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC. The fully insulated tools prevent potential short circuits caused by unintentional contact, even in confined working environments.
Only compatible with insulated ratchet wrench, cross-handle adapter and adapter slimVario® electric from Wiha.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Protects your material: Fully insulated tool reduces the risk of short circuits.
Product dimensions: 42 x 18 x 18 mm (LxWxD)
Application: Safe installation of terminals and sleeves, conductor connections and fastening of conductor lines. For work in the area of live parts up to 1,000 V AC.
Safety is the top priority when users are working on live parts. The insulated nut driver inserts from Wiha are the ideal tool for working on electrical systems. Combined with the insulated ratchet wrench or T-handle adapter, the nut driver inserts can be used for tightening and loosening hex screws. The insulated nut driver inserts undergo individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC. The fully insulated tools prevent potential short circuits caused by unintentional contact, even in confined working environments.
Only compatible with insulated ratchet wrench, cross-handle adapter and adapter slimVario® electric from Wiha.
Product dimensions: 42 x 18 x 18 mm (LxWxD)
Application: Safe installation of terminals and sleeves, conductor connections and fastening of conductor lines. For work in the area of live parts up to 1,000 V AC.
Safety is the top priority when users are working on live parts. The insulated nut driver inserts from Wiha are the ideal tool for working on electrical systems. Combined with the insulated ratchet wrench or T-handle adapter, the nut driver inserts can be used for tightening and loosening hex screws. The insulated nut driver inserts undergo individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC. The fully insulated tools prevent potential short circuits caused by unintentional contact, even in confined working environments.
Only compatible with insulated ratchet wrench, cross-handle adapter and adapter slimVario® electric from Wiha.