Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
All prices are net. Packing, transport and taxes will be charged additionally.
Items: 31886
Order-No.
Information
EXPERT SDS plus-7X hammer drill set, 6/8/10 mmDrill & Electrically powered screwing
Outstanding service life in reinforced concrete! Penetrates reinforced concrete with 4 cutting solid carbide heads. Drilling through reinforced concrete is a difficult task that demands a lot from the drillers. Normal drills with two cutting edges get stuck in the reinforcement and break off. The solid carbide head on the EXPERT SDS plus-7X is an advanced 4-flute cutter made from a single piece of the hardest metal: it won't bind and doesn't show weakness in hammer drilling. For construction professionals who regularly drill in concrete and reinforced concrete, for example for drilling and installations. The Bosch EXPERT SDS plus-7X hammer drill offers unparalleled performance, reliability and durability. It is THE EXPERT accessory for SDS plus rotary hammers. Extremely resilient drill bit with Bosch Carbide Technology.
Total length: 165mm
Working length: 100mm
Diameter: 6mm
show more
Price: EUR 29.81
TITAN Pinzette 120mm Form 3Tweezers
No. 5-035. form 3 material titanium TITAN TWEEZERS made of titanium material meet highest requirements, are super light, corrosion resistant, also against aggressive acids, antimagnetic, antibacterial, good conductive, solder repellent and glare free. The melting point is 1677xB0C. matt polished surface, glare-free length 120 mm weight 9 g lightweight design, tapering, fine points
show more
Price: EUR 29.08
4250838506786
Bernstein
Bernstein
ESD Werkzeughalter VARIO tronics (ohne Werkzeuge)Tool Kits
No. 5-090-0. 140 mm tool fitting for setting up or hanging (wall mounting xD8 6 mm) made of sturdy 1.5 mm sheet steel The practical tool holder VARIO tronics is made of sturdy 1.5 mm sheet steel and has a high-quality, dissipative black powder coating. In addition to pliers and tweezers, our handy screwdrivers or round objects with a maximum diameter of 9 mm can also be stored. The recess in the lower area allows the blades or tips of the tools to be quickly identified and selected. The locking aid at the rear edge additionally helps to hold each tool in position. Small noses on the upper edge of the suspension rail prevent pliers or tweezers from slipping down. The tool holder can be set up as well as hung. Two holes on the back allow easy mounting on the wall. EPA suitable for electrostatically protected areas (ESD workplace / ESD protection zone). For more order in the workplace! The VARIO tool holder was developed for the orderly suspension of pliers, tweezers and screwdrivers. This means that tools are always well stowed away and ready to hand at any time. EPA suitable. For working in electrostatically protected areas (ESD workplace / ESD protection zone). black ESD powder coating dissipative (10^5 ohm) measures 150 x 140 x 75 mm weight 400 g 8 slots xD8 9 mm
show more
Price: EUR 29.08
VDE Telefonzange 205mm mit Hieb gerade mit DrahtschneiderCutters and Pliers
No. 13-207 VDE. steel wire up to xD8 2.5 mm With safety two-layer dip-insulation on the outside red - inside yellow. Damage to the outer red insulation is immediately visible through the underlying yellow insulation. The advantage is a simple and always visible security check. according to DIN ISO 5745 material special tool steel, oil-hardened surface chrome plated handle two-color safety insulation VDE standard IEC60900 / EN60900 length 205 mm weight 240 g
show more
Price: EUR 29.07
VDE Abisolierzange 165mm mit AnschlagschraubeCable stripper & insert tools
No. 13-806 VDE. With safety two-layer dip-insulation on the outside red - inside yellow. Damage to the outer red insulation is immediately visible through the underlying yellow insulation. The advantage is a simple and always visible security check. according to DIN ISO 5743 material special tool steel, oil-hardened surface chrome plated handle two-color safety insulation VDE standard IEC60900 / EN60900 length 170 mm weight 200 g
show more
Price: EUR 28.81
4250838514040
Bernstein
Bernstein
ESD Seitenschneider CLAssICline Flush 115mm ableitfaehigCutters and Pliers
No. 3-602-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA01.5/1.2/0/0 head width 11 mm blade length 13 mm The pliers of this program have been successfully tested by several test laboratories according to DIN EN 61340-5-1, 61340-2-1 as well as 61340-2-3 for work in ESD-protected areas. Made of special tool steel, high gloss mirror polished, box joint, with dissipative 2-K hand protection cover and exchangeable double leaf spring. material high-quality steel (HRC 56-58) surface brightly polished 2-component ESD plastic handle ergonomically shaped, dissipative between 10^6 and 10^9 ohm length 115 mm weight 65 g Flush (mini side face cut with small top)
show more
Price: EUR 29.08
Seitenschneider 150mmCutters and Pliers
No. 3-133-16. cutting capacity soft/medium/hard/piano xD8 in mm 4.0/2.5/1.8/0 head width 18 mm blade length 18 mm Swedish form. Our pliers are characterized by the following characteristics: Quality steel, matt chrome-plated, inlaid knuckle joint, with two-coloured hand protection sleeves. material high-quality steel (HRC 56-58) surface matt chrome plated 2-component plastic handle ergonomically shaped, non-slip length 150 mm weight 155 g Semi Flush (with side face, cut pyramid shape)
show more
Price: EUR 29.08
Telefonzange 205mm mit Hieb Backenlaenge 75mmCutters and Pliers
No. 3-245-16. head width 18 mm jaw length 75 mm Cutting edge for hard wire. Our pliers are characterised by the following properties: Quality steel, matt chrome-plated, inlaid knuckle joint, with two-coloured hand protection sleeves. material high-quality steel (HRC 56-58) surface matt chrome plated 2-component plastic handle ergonomically shaped, non-slip length 205 mm weight 210 g cutting edge for hard wire
show more
Price: EUR 29.08
ESD SMD Pinzette ULTRA FINE 110mm Form 5b Edelstahl Winkel 3Tweezers
No. 5-052-UF-13. tip width 0.2 mm (+/-0.05 tolerance) form 5b material stainless steel SA antimagnetic SPECIAL TWEEZERS FOR SMD TECHNOLOGY. High-quality precision tweezers made of stainless steel, matt polished, antimagnetic, acid-resistant, with ESD coating (-13). matt polished surface, smooth and glare-free ESD coating dissipative between 10^6 - 10^9 ohm length 110 mm weight 15 g 30xB0 angulated very fine concave
show more
Price: EUR 29.08
Shank for hole saw 1 pc.Drill & Electrically powered screwing
11mm / 7/16 "shank quick release. Quick release mechanism for quick hole saw changes. For use with hole saws from 32mm to 150mm. Supplied with interchangeable 1/4" HSS pilot drill. Tool holder (drill): hexagon shank.
Price: EUR 30.33