Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
All prices are net. Packing, transport and taxes will be charged additionally.
Items: 31886
Order-No.
Information
NEO3 white Compact 400 lumen sports headlampLamps, Magnifiers, Electric Ac.
No. 502719. With NEO3 the next run in the dark can come! The compact headlamp shines with a bright and customized light image, which was developed specifically for running and other fast-paced activities. The weight distribution between lamphead and battery ensures perfect balance and wearing comfort. Additional features such as the reflective headband and the red flashing rear light provide 360xB0 visibility and thus increase safety, especially in confusing urban traffic. Its outstanding price-performance ratio, the tilting lamphead (45xB0) and an integrated battery status LED round off the strong overall package of the NEO3. Lamphead diameter: 4,1 cm (1.6 in). Luminosity: MAX 400 lm. Lighting Range: MAX 80 m (262 ft). Battery: 3x AAA (Micro), included. Battery duration: MAX 20 h on Eco mode with 20 lm. In the box: lamp, 1 set of batteries, comfort pad. Weight including batteries: 97 g (3.4 oz). Water Resistance: IP54
show more
Price: EUR 31.10
VDE Einmaul-Ringschluessel einseitig 22,0mm
No. 16-548 VDE. made of chrome vanadium chromed according to DIN 7447 With safety two-layer dip-insulation on the outside red - inside yellow. Damage to the outer red insulation is immediately visible through the underlying yellow insulation. The advantage is a simple and always visible security check. Single-jawed ring spanner chrome vanadium, chrome-plated to DIN 7447. weight 353 g two-color multilayer-dip-insulation 1000 V
show more
Price: EUR 30.65
Automatische CrimpzangeCutters and Pliers
No. 3-0612. ratchet mechanism With ratchet mechanism for crimping of insulated terminals, version: 0.5 - 1.0 / 1.5 - 2.5 / 4 - 6 mm^2 (AWG 22 - 18 / 16 - 14 / 12 - 10) Automatic crimping pliers ratchet mechanism for crimping insulated terminals. material tool steel (HRC 54-56) surface burnished 1-component plastic handle non-slip length 220 mm weight 430 g for crimping isolated terminals
show more
Price: EUR 30.74
4250838525480
Bernstein
Bernstein
Drehmoment-Adapter 0.1Nm fuer 4mm BitsTorque products
No. 4-971. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.74
4250838525497
Bernstein
Bernstein
Drehmoment-Adapter 0.2Nm fuer 4mm BitsTorque products
No. 4-972. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.74
4250838525503
Bernstein
Bernstein
Drehmoment-Adapter 0.3Nm fuer 4mm BitsTorque products
No. 4-973. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.74
4250838525527
Bernstein
Bernstein
Drehmoment-Adapter 0.5Nm fuer 4mm BitsTorque products
No. 4-975. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.74
4250838525534
Bernstein
Bernstein
Drehmoment-Adapter 0.6Nm fuer 4mm BitsTorque products
No. 4-976. torque adapter length 22 mm (without shank) adapter xD8 8 mm hex shank 4.0 mm (5/32 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque adapter is suitable for low torques. Thanks to the BERNSTEIN bit adapter, it can easily be clamped between any commercially available holding tool and a 4 mm bit. This turns every bit holder into a torque screwdriver. magnet bit holder 4.0 mm (5/32 inch) material alloyed steel HRC 43-48 single packing length 32 mm weight 7,5 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.74
ESD SMD Kleinbehaelter (VE10) Masse 41x37x15mm
No. 9-323-VE10. conductive 10^2 to 10^5 ohm to stick together suitable conductive foam inserts on request ESD means Electrostatic Discharge, which stands for the electrostatic discharge (potential equalization) that occurs between charged bodies through direct contact or flashover. Conductive chip container as a storage box, transport box for SMD components, also known as ""mouse toilet"". They provide optimal protection for electrostatic sensitive microprocessors, circuit boards, chips, etc. because the conductivity of 10^2 to 10^5 ohm electrostatic stresses are compensated. lid with spring mechanism inside measures 47 x 37 x 15 mm weight 15 g known as ""mouse toilet""
show more
Price: EUR 30.74
4250838528399
Bernstein
Bernstein
Drehmoment-Adapter 3.0Nm fuer 1/4 Zoll BitsTorque products
No. 4-986. torque adapter length 28 mm (without shank) adapter xD8 12 mm hex shank 6.35 mm (1/4 inch) Precise and accurate, for 20,000 clicks. Adapters are mainly suitable for manual operation. In conjunction with power-tool we recommend max. a speed of 100 rpm, with minimal click repetition. Higher speed as special model on request. The torque value is preset in the adapter and can be clamped between any standard holding tool and a 1/4 inch bit. This turns every bit holder into a torque screwdriver. magnet bit holder 6.35 mm (1/4 inch) material alloyed steel HRC 43-48 single packing length 39 mm weight 21 g precise and accurate for 20,000 clicks. In combination with power-tool max. speed 100 rpm.
show more
Price: EUR 30.74