Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Drive: For bits according to DIN 3126, ISO 1173 style C 6.3.
Drive: 1/2" internal square-drive in accordance with DIN 3126, ISO 1174, style G 12.5.
Application: For use of C 6.3 bits.
Extra: The alternative to G 12.5 bits.
Supplementary information: for bits C6,3
Sleeve: Steel, hardened.
Standards: DIN 3126, ISO 1173, Style D6,3
DIN 3121, ISO 1174, Style G12,5
Application: Insert screws into or remove from boreholes, especially in difficult to access areas.
Application: Practical fold out holder for hex screws in the workplace or on the job.
Application: Chrome-vanadium steel, through hardened, electro-plated.
Extra: MagicRing® of spring steel (from size 3 mm) secures all hex standard screws independently of screw material in any position.
Extra: The ball end enables the user to work at angles up to 25°.
Extra: Robust casing with eject button for simple and easy key selection.
Handle: Ergonomic, reinforced fibreglass housing, 120 mm long.
Blade: Chrome-vanadium steel, through hardened, electro-plated.
Application: Practical fold out holder for TORX® Tamper Resistant (with security pin) screws in the workplace or on the job.
Extra: Robust casing with eject button for simple and easy key selection.
Extra: Borehole in every blade tip.
Handle: Ergonomic, reinforced fibreglass housing, 120 mm long.
Blade: Chrome-vanadium steel, through hardened, electro-plated.
Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
GS tested.
Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.
Increases your efficiency: A secure, non-slip grip in all standard work situations.
Protects your health: Special DynamicJoint® design reduces effort required for cutting.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For work in the area of live parts up to 1,000 V AC.
Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.
Standards: DIN ISO 5746.
Manufactured acc. to IEC 60900.
Application: Power assisted general purpose pliers for gripping and holding as well as cutting wires and cables ranging in hardness from soft to extremely hard.
Application: For work in the area of live parts up to 1,000 V AC.
Standards: Manufactured acc. to IEC 60900.
DIN ISO 5746.
DIN 3126, ISO 1173, Style C6,3
Content:
- 2x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 3x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
- 2x Bit Standard 25 mm TORX® 1/4" C6,3 T10 (01716)
- 6x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 6x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 6x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 2x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
- 2x Bit Standard 25 mm TORX® 1/4" C6,3 T40 (01722)
- 1x Bit box
Simplifies your work: Larger handle - maximum power.
Increases your efficiency: 90% less volume, 80% less weight - 100% efficiency.
Increases your flexibility: Standard bits are also suitable for machine operation.
Protects your health: No risk of injury, *all bits stowed safely inside the handle.
Application: The alternative to a set of screwdrivers. Ideal for screw fastening when out on jobs.
It's not uncommon for tradesmen out on jobs to need a screwdriver with a specific profile but not have the precise one within reach when they need it. The Wiha screwdriver with the LiftUp 25 bit magazine puts an end to such problems, because with only one tool you have 12 different drives at hand anytime, anywhere. LiftUp thus replaces an entire screwdriver set. At the press of a button, the bit magazine at the handle end comes out, delivering the 25 mm bits with a 1/4" drive ready for removal. The contained standard bits can be used for both manual and machine operation. Thanks to its large volume, the ergonomically shaped two-component handle ensures optimum power transmission and maximum torque values. Powerful screw fastening or loosening is therefore particularly easy for the hand.
Content:
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 4.5 mm (01623)
- 1x Bit Standard 25 mm Slotted 1/4" C6,3 6.5 mm (01626)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH1 (01657)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH2 (01658)
- 1x Bit Standard 25 mm Phillips 1/4" C6,3 PH3 (01659)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ1 (01688)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ2 (01689)
- 1x Bit Standard 25 mm Pozidriv 1/4" C6,3 PZ3 (01690)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T15 (01717)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T20 (01718)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T25 (01719)
- 1x Bit Standard 25 mm TORX® 1/4" C6,3 T30 (01721)
Application: Gripping and holding as well as cutting soft and hard wires and cables. Preferred choice in the electrical sectors.
Application: For work in the area of live parts up to 1,000 V AC.
Standards: Manufactured acc. to IEC 60900.
DIN ISO 5745.
Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.
Protects your health: Special DynamicJoint® design reduces effort required for cutting.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Application: Power-assisted all-round diagonal cutter for cutting soft to extremely hard wires and cables.
Cutting many cables and wires to length over a long period requires a great deal of force and causes considerable strain on wrists. Wiha heavy-duty diagonal cutters with a Classic handle provide effortless cutting for tough usage. The plier joint with DynamicJoint® ensures hand force is optimally applied when cutting, providing up to 40% greater cutting force. With their semi-circular head, these powerful pliers also guarantee a clean cut edge. The heavy-duty diagonal cutters are especially suited to applications in the field of mechanics.