Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
All prices are net. Packing, transport and taxes will be charged additionally.
Items: 31630
Order-No.
Information
Wiha T-handle insulated for nut driver (43062)Wrenches
No. 43062.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Improved access: Deep-set screws can be reached easily.
Application: Used in combination with Wiha nut drivers for fastening deep-set hex screws. For work in the area of live parts up to 1,000 V AC.
Application:
During electrical installation tasks, it is important to work with an insulated tool in order to ensure your own safety. This is where the Wiha T-handle with nut driver adapter comes in. Its insertion with ball clamp enables the quick and easy replacement of nut driver inserts. Thanks to the T-handle adapter, even deep-set screws can be reached effortlessly. The insulated T-handle is subject to individual piece testing as per the international IEC 60900 standard, thus ensuring safe work on live parts up to 1,000 V AC.
Manufactured according to EN/IEC 60900.
show more
Price: EUR 38.38
Wiha Cable cutter Classic 210 mm, 8 1/4" (43541)Cutters and Pliers
No. 43541.
Increases your efficiency: Clean work thanks to cable cutting without crushing.
Application: Cable cutter for cutting of copper and aluminium cables without crushing, also suitable for stripping.
Application: Not for steel cable, wires and copper conductors with hard coatings.
Design: Light, energy-saving and clean cutting with specially ground precision cutting edges.
Design: Durable cutting edges due to additional induction hardening to approx. 58 HRC.
Design: Safety stop prevents finger injuries after cutting.
Head shape: Classic cutting form.
Material: High quality C 70 tool steel, tempered.
show more
Price: EUR 38.47
932 A Screwdriver for slotted screws, 2.5 x 14 x 250 mmScrew Drivers
No. 05018274001. 932 A Screwdriver for slotted screws, 2.5 x 14 x 250 mmWera Chiseldriver for fastening, chiselling and loosening seized screws. Single-component Kraftfrom handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.05018274001
show more
Price: EUR 39.29
Bit-Check 10 Universal 3, 10 piecesBits, holder, keys, nuts
No. 05056375001. Bit-Check 10 Universal 3, 10 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4", x 50 mm 3x 851/1 TZ bits: PH 1x25 mm, PH 2x25 mm, PH 3x25 mm 3x 855/1 TZ bits: PZ 1x25 mm, PZ 2x25 mm, PZ 3x25 mm 3x 800/1 TZ bits: 0.8x5.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mmRobust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent magnet and quick-release chuck for the take-up of bits with ¼", hexagon head drive as per DIN ISO 1173-C 6.3. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Includes Torsion bits to combat premature wear. Tough viscous Wera bits for hexagonal head screws and universal use.05056375001
show more
Price: EUR 37.79
Bit-Check 10 Universal 3 SB, 10 piecesBits, holder, keys, nuts
No. 05073410001. Bit-Check 10 Universal 3 SB, 10 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4", x 50 mm 3x 855/1 TZ bits: PZ 3x25 mm, PZ 2x25 mm, PZ 1x25 mm 3x 851/1 TZ bits: PH 3x25 mm, PH 2x25 mm, PH 1x25 mm 3x 800/1 TZ bits: 1.2x6.5x25 mm, 1x5.5x25 mm, 0.8x5.5x25 mmRobust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent magnet and quick-release chuck for the take-up of bits with ¼", hexagon head drive as per DIN ISO 1173-C 6.3. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Includes Torsion bits to combat premature wear. Tough viscous Wera bits for hexagonal head screws and universal use.05073410001
show more
Price: EUR 38.32
950/9 Hex-Plus Multicolour 1 L-key set, metric, BlackLaser,Bits, holder, keys, nuts
No. 05022089001. 950/9 Hex-Plus Multicolour 1 L-key set, metric, BlackLaser, 9 pieces 9x 950 SPKL L-key Multicolour, metric: 1.5x90 mm, 2x101 mm, 3x123 mm, 4x137 mm, 5x154 mm, 6x172 mm, 8x195 mm, 10x224 mm, 2.5x112 mmL-keys with plastic sleeve (SPKL) made of circular, easy-grip material. The sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their colour coding and size markings. The wear-free material of the clip guarantees easy removal and a secure hold of the L-keys. For hexagonal socket screws.05022089001
show more
Price: EUR 39.12
Bit-Check 7 Diamond 1 SB, 7 piecesBits, holder, keys, nuts
No. 05073419001. Bit-Check 7 Diamond 1 SB, 7 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4", x 50 mm 2x 851/1 BDC bits: PH 1x25 mm, PH 2x25 mm 2x 855/1 BDC bits: PZ 1x25 mm, PZ 2x25 mm 2x 800/1 BDC bits: 1x5.5x25 mm, 1.2x6.5x25 mmBits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera ",Take it easy", Tool Finder with its colour coding and clearly visible imprint.05073419001
show more
Price: EUR 38.42
6001 Joker Switch Ratcheting combination wrench, with switchWrenches
No. 05020065001. 6001 Joker Switch Ratcheting combination wrench, with switch lever, 10 x 159 mmJoker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With ",Take it easy", tool finder: colour coding according to size.05020065001
show more
Price: EUR 38.19
6001 Joker Switch Ratcheting combination wrench, with switchWrenches
No. 05020064001. 6001 Joker Switch Ratcheting combination wrench, with switch lever, 8 x 144 mmJoker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With ",Take it easy", tool finder: colour coding according to size.05020064001
show more
Price: EUR 38.19
6001 Joker Switch Ratcheting combination wrench, with switchWrenches
No. 05020075001. 6001 Joker Switch Ratcheting combination wrench, with switch lever, imperial, 5/16", x 144 mmJoker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With ",Take it easy", tool finder: colour coding according to size.05020075001
show more
Price: EUR 37.57