Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Increases your efficiency: Two pliers in one - 200 % power at the touch of a button, available at any time.
Protects your health: Requires less force and reduces pressure on the wrists.
Application: For cutting various materials from soft to extremely hard, such as cables, nails, screws, bolts, wire cable, spring wire, chains, etc.
Design: Clever - BiCut does the job of two pairs of pliers.
Design: Powerful - Up to 50% less hand strength required for cutting.
Design: Power - Cutting force doubled for extremely hard materials.
Design: Comfortable - Easily switch between the two strengths in a one handed operation.
Design: Robust and durable - Cutter blades induction hardened up to 64 HRC.
Head shape: Semi-circular.
Material: Hard as steel - Drop forged of high-quality C70 steel.
Based on DIN ISO 5749.
Increases your efficiency: Two pliers in one - 200 % power at the touch of a button, available at any time.
Protects your health: Requires less force and reduces pressure on the wrists.
Application: For cutting various materials from soft to extremely hard, such as cables, nails, screws, bolts, wire cable, spring wire, chains, etc.
Head shape: Semi-circular.
Material: Hard as steel - Drop forged of high-quality C70 steel.
Based on DIN ISO 5749.
Meets your requirements: White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Extra: With cast iron balls inside the hammer head for recoilless work.
GS tested.
Makes handling easier: Simple, automatic setting of the box-type, precision-stepped joint.
Saves time: Rapid setting of opening width, especially in constantly changing applications.
Application: For quick and optimal gripping and holding pipes and angular profiles such as hexagon nuts in installations.
Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer the optimal grip for all occasions. With detent adjustment, it offers maximum variability in the installation area, where the precise mechanical setting takes place automatically while gripping the work piece. Crushing injuries are prevented thanks to the integrated clamping protection. Double guidance based on a box joint ensures the greatest stability of the pliers. At the same time, the slim design in the head and joint area provides reliable access to the work piece, even in confined areas. The handles of the pliers are made of anti-slip plastic and offer users a strong grip, even in oily or wet work situations. In addition, slipping off the work piece is prevented by the self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable secure grip with long-term durability. The robust water pump pliers are dirt resistant.
DIN ISO 8976.
Simplifies your work: Up to 40% more cutting force thanks to optimised leverage.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Protects your health: Special DynamicJoint® design reduces effort required for cutting.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: Power-assisted all-round diagonal cutter for cutting soft to extremely hard wires and cables.
Standards: Manufactured acc. to IEC 60900.
Cutting many cables and wires to length over a long period requires a great deal of force and causes considerable strain on wrists. Wiha heavy-duty diagonal cutters with a two-component handle provide effortless cutting for tough usage. The plier joint with DynamicJoint® ensures hand force is optimally applied when cutting, providing up to 40% greater cutting force. Its triggered opening spring allows the user to work effortlessly for long periods of time. With their semi-circular head, these powerful pliers also guarantee a clean cut edge. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. These heavy-duty diagonal cutters are also manufactured as per the international IEC 60900 standard and are thus approved for working on live parts up to 1,000 V AC. These heavy-duty diagonal cutters are the ideal tool for applications in the field of electrics.
DIN ISO 5749.
Increases your efficiency: Fully compatible with the Wiha slimBit system.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Lowers your costs: The correct torque protects you from warranty claims.
Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Increases your efficiency: Fully compatible with the Wiha slimBit system.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Lowers your costs: The correct torque protects you from warranty claims.
Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Increases your efficiency: Fully compatible with the Wiha slimBit system.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Lowers your costs: The correct torque protects you from warranty claims.
Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Increases your efficiency: Fully compatible with the Wiha slimBit system.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Lowers your costs: The correct torque protects you from warranty claims.
Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Increases your efficiency: Fully compatible with the Wiha slimBit system.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Lowers your costs: The correct torque protects you from warranty claims.
Lowers your costs: Torque tool extension for LiftUp and slimVario® screwdriver sets.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Application: For controlled fastening for live parts up to 1,000 V AC, such as circuit breakers.
The easyTorque adapter provides controlled screw tightening combined with safe work practices for electric applications. This torque adapter guarantees process-safe use, thus safeguarding against material damage and eliminating the need for refinishing. Compatible with all slimVario products, the insulated easyTorque adapter also ensures a secure hold for 75 mm slimBits. The handy adapter thus transforms the slimVario screwdriver with bit holder, the slimVario Stubby electric and the LiftUp electric screwdriver with bit magazine into a torque tool in next to no time. A click signal can be heard and the yellow ring and red adapter seen rotating in opposite directions when the torque is reached. The easyTorque adapter undergoes an individual piece test as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.