Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- basic tool chrome-plated
- Optimum combination: the tweezer sets come in various combinations in a high-quality tool ro ll for safe transport and damage-free storage.
- Five high-quality sets of tweezers: Precision Tweezers, Universal Tweezers, SMD-, ESD, Plastic and Insulated Tweezers
- Two different tool rolls (VDE set with 5 compartments
- others with 7 compartments)
- For reliable tool protection: holding capacity tested in numerous drop tests for tools up to 6 kg, even battery-operated tools
- Large working radius: long lanyard for convenient working
- Reduces the risks of tool loss, injury to living beings and damage to objects
- To me et regulations while working at heights, for example industrial climbing, arborists, rescue services , at sea, etc.
- Tether can be attached directly to the cord side or the carabiner to climbing equipment
- The roughly 90 cm long gathered fabric strap tether stretches to a length of abou t 1.5 m when weight is applied
- with strap made of a flat belt sewn to one end and a cord and cord stopper sewn into the other end, each sewn four times
- The additional loop on the lanya rd allows for direct connection of the tool to the climbing equipment with a carabiner (sold separat ely)
- Cord stopper made of solid aluminium, also available as a spare part
- For KNIPEX pliers with tether attachment point only with 1.5 kg adapter strap 00 50 02 T
- No PPE (perso nal protective equipment): not suitable for personal safety!
- for fitting retaining rings and circlips without grip holes
- for shaft retaining devi ces
- with pressure spring
- for retaining rings with a minimum ring split gap of 3.6 mm
Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Product dimensions: 288 x 108 x 26 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.
Extra: With cast iron balls inside the hammer head for recoilless work.
Choosing the right hammer is particularly important on sensitive surfaces to prevent damage. With its steel tube handle, the no-recoil soft-faced hammer allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. Around 25% more hammer head mass ensures additional power. The yellow medium-hard hammer faces are ideal for universal use in areas such as tool and machine engineering as well as sheet metal and assembly work. The hammer is also impressive due to its steel tube handle with ergonomic, non-slip grip. Each hammer head is available individually as a spare part.
Simplifies your work: Ideal for fine gripping and bending work in electronics.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Product dimensions: 124 x 96 x 18 mm (LxWxD)
Application: Mainly for precision gripping and bending work.
Standards: IEC 61340-5-1.
DIN ISO 9655.
Lowers your costs: No damage to wire insulation through sliding shoe on tip.
Product dimensions: 288 x 79 x 31 mm (LxWxD)
Sliding shoe protects the conductor insulation
Approved for 1,000 V AV
Increases your efficiency: Two pliers in one - 200 % power at the touch of a button, available at any time.
Protects your health: Requires less force and reduces pressure on the wrists.
Product dimensions: 215 x 60 x 28 mm (LxWxD)
Application: Suitable for cutting different materials, ranging from soft to extremely hard, such as cables, nails, screws, bolts, wire cable, spring wire and chains.
Simple switching from 100% to 200% for hard materials
Power off - 100% power with maximum opening width, e.g. for cables
Power on - 200% power with reduced opening width, e.g. for screws and chains
Precise, safe work - at double the power: no problem for the Wiha BiCut® electric diagonal cutters. If standard performance from heavy-duty diagonal cutters is no longer enough, the force can be doubled at the simple press of a button. In normal mode, BiCut® effortlessly cuts items such as cables or iron nails. A patented joint design transforms the heavy-duty diagonal cutters into high-performance diagonal cutters for extremely hard and stronger materials. This function is not only suitable for cutting exceptionally tough materials but also for users who need to carry out normal cutting tasks over a longer period of time. Thanks to double cutting force, the user only needs to apply half the hand force. This ensures that the work is easy on muscles and tendons. In addition, it significantly reduces the risk of cramping or slipping if too much force is applied. The ergonomically shaped plier handle ensures comfortable, fatigue-proof work. The cutting edges that are inductively hardened to approx. 64 HRC and the high-quality C 70 tool steel contribute to a long tool life.
To benefit from this product for as long as possible, we recommend regularly applying a drop of oil after use.
Based on DIN ISO 5749.