Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
All prices are net. Packing, transport and taxes will be charged additionally.
Items: 31621
Order-No.
Information
Powerbank Flex 10 Powerbank with 2x 21700 Li-Ion batteries,Lamps, Magnifiers, Electric Ac.
No. 502127. Offering six functions in a robust and water-resistant housing our Flex10 provides: powerbank, battery charger with charge level indicator, secure battery storage, two separate displays for capacity check, double protection against short circuits, fast battery replacement. The Flex10 can be operated with two Li-Ion batteries type 21700, included (3,7 V, 9000 mAh, 33,30 Wh combined). Green concept: less electronic waste as used batteries can be replaced. Up to 30% shorter charging time (compared to charging in a P7R Core flashlight). Suitable for outdoor activities due to water and dust protection IP65 and special USB ports. Included batteries can be used directly in the suitable products, thus no loss of capacity or time. Additional USB-C for input and output. Dimensions: 120 x 54 x 29 mm (4.7 x 2.1 x 1.1 in). Weight including batteries: 235 g (8.3 oz). Housing material: plastic (PC, ABS). Water Resistance: IP65. Compatible with H7R Core, H7R Signature, H7R Work, P7R Core, P7R Signature, P7R Work, P7R Work UV.
show more
Price: EUR 56.04
4250838503150
Bernstein
Bernstein
ESD Spitzenschneider BLACKline Flush 125mm ableitfaehigCutters and Pliers
No. 3-906-7. cutting capacity soft/medium/hard/piano xD8 in mm:xA00.8/0.6/0/0 head width 13 mm oblique cutting with 7 mm blades, jaw length 25 mm For working in hard-to-reach places, for flush cutting. The pliers of this program have been successfully tested by several test laboratories according to DIN EN 61340-5-1, 61340-2-1 as well as 61340-2-3 for work in ESD-protected areas. BLACKline pliers are characterised by their slender, dip-insulated handles. The highly polished surface and the inlaid knuckle guarantee a long service life with good care. The very narrow pliers heads are ideal for working on filigree components. material high-quality steel (HRC 56-58) surface glossy steel polished handle dipped insulation ESD non-slip, dissipative 3x10^7 Ohm length 125 mm weight 75 g Flush (mini side face cut with small top)
show more
Price: EUR 56.09
Haushaltsschere 180mmKnives, Scissors
No. 5-311. very stable and robust scissor material high-quality steel length 180 mm weight 80 g cutting length 70 mm
Price: EUR 12.77
Fuehlerlehre 21 Blatt (0,05-2,0mm)Mech. Test Tools
No. 7-515. figures in mm and inches tolerance according to T2 (see technical description) INOX stainless quality steel T2 TOLERANCES Nominal thickness 0.03 / 0.04 / 0.05 / 0.06 +/- 0.004 mm, nominal thickness 0.07 / 0.08 / 0.09 / 0.10 +/- 0.005 mm, nominal thickness 0.11 / 0,12 / 0,13 +/- 0,005 mm, nominal thickness 0,14 / 0,15 +/- 0,00 6mm, nominal thickness 0,16 / 0,18 +/- 0,007 mm, nominal thickness 0,20 + / - 0,008 mm. You should pay attention to the following errors during measurement in order to obtain a correct measurement result. Keep the feeler gauge as well as the part to be measured calm and straight, do not tilt it. At best you have a constant reference temperature of 20 degrees Celsius, strong temperature fluctuations change the measurement results. Please check your feeler gauge regularly for damage, quirks, indentations and remove soiling immediately. With the feeler gauges gap measurements can be measured, it consists of a set (compartments) of hardened metal strips with different strength. Testing and measuring equipment are the most important tools and belong on every workbench or in every tool case. Sensor gauges are used where measuring with calipers or gauges is not possible or cumbersome, often when adjusting electrical contact switches. conical leaf shape cover sheet nickel plated with locking screw length 100 mm weight 190 g 0.05-0.1-0.2-0.3-0.4-0.5 - 0.6-0.7-0.8-0.9-1.0 - 1.1-1, 2-1.3-1.4-1.5 - 1.6-1.7-1.8-1.9-2.0
show more
Price: EUR 13.47
4250838513746
Bernstein
Bernstein
ESD Seitenschneider EUROline Semi Flush 135mm ableitfaehigCutters and Pliers
No. 3-668-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA02.0/1.5/0.7/0 head width 14 mm blade length 17 mm The pliers of this program have been successfully tested by several test laboratories according to DIN EN 61340-5-1, 61340-2-1 as well as 61340-2-3 for work in ESD-protected areas. Made of special tool steel, high-gloss burnished, box joint, with dissipative 2-K hand protection cover and exchangeable double leaf spring. material high-quality steel (HRC 56-58) surface glossy burnished 2-component ESD plastic handle ergonomically shaped, dissipative between 10^6 and 10^9 ohm length 135 mm weight 110 g Semi Flush (with side face, cut pyramid shape)
show more
Price: EUR 55.59
GAS-Loetkolben Pro Piezo 75W
No. 8-376. for moblie working tip temperature up to soldering: 580xB0C/1075xB0F, blow torch: 1300xB0C/2372xB0F / hot air tip 625xB0C/1157xB0F, hot knife 580xB0C/1075xB0F Ignition with piezo-electronic system Filling with butane lighter gas, operating time 45 minutes, 75 wattage (eqiv.), refill time 10 seconds, piezo ignitor (Ignitor life approx. 50,000 cycles), tip temperature up to soldering: 580xB0C/1075xB0F, blow torch: 1300xB0C/2372xB0F / hot air tip 625xB0C/1157xB0F, hot knife 580xB0C/1075xB0F. Temperature adjustable. TUV approval with safety cut-off switch. GAS soldering iron is perfect for all mobile applications. The soldering iron is ignited by a piezo-electronic system. The on/off switch is marked with 1-0, the ignition switch is marked with a lightning. Soldering, hot air or hot knife by the placement of different soldering tips possible. Please note the enclosed instructions for use. soldering tip width 2 mm 75 wattage TUV approval length 170 mm weight 94 g filling with butane lighter gas
show more
Price: EUR 56.97
4250838525855
Bernstein
Bernstein
ESD Seitenschneider TECHNICline Flush matt 120mm ableitfaehiCutters and Pliers
No. 3-962-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA01.2/1.0/0/0 head width 10 mm blade length 8 mm CARE NOTE: High humidity or touching the pliers head with your fingers (sweat) causes rusting. Therefore, the pliers should always be kept dry or protect with oil for storage. If there is any rust on the pliers head, it can be easily removed, with a slight polish. Our ESD tools comply with the following ESD standards DIN EN 61340-5-1, VDE 0300-5-1:2017-07, DIN EN 61340-2-1, VDE 0300-2-1:2016-07, DIN EN 61340-4-6, VDE 0300-4-6:2016-04. We achieve a discharge resistance of 10^6 to 10^9 ohm with the pliers handles. Attention, the use of hand tools alone is not enough to avoid electrostatic charge. For general safety, please use our wrist grounding and ESD mats, for further information see the section workplace equipment. Very fine side cutters with narrow, rounded pliers head. This version is available with flush, semi flush and full flush. The pliers are suitable for cutting general resistance wire, solder wire, winding wire and heating wire (thermocouple wire). Specifically for copper wire, brass wire, steel wire, iron wire, aluminum wire, bonding wire, tin wire, nickel wire, gold wire, silver wire, platinum wire, tungsten copper wire, tungsten wire, glass fiber and kevlar. Please note the cutting capacity in the pliers handles and the care instructions for a longlife of your pliers. For special applications and individual solutions, please contact us, we are pleased to advise you. material ball bearing steel (HRC 63-65) surface without reflection matt polished dissipative between 10^6 and 10^9 ohm length 120 mm weight 75 g Flush (mini side face cut with small top)
show more
Price: EUR 55.90
4250838525909
Bernstein
Bernstein
ESD Seitenschneider TECHNICline Flush 125mm ableitfaehigCutters and Pliers
No. 3-972-15. cutting capacity soft/medium/hard/piano xD8 in mm:xA01.6/1.2/0/0 head width 12.5 mm blade length 10 mm CARE NOTE: High humidity or touching the pliers head with your fingers (sweat) causes rusting. Therefore, the pliers should always be kept dry or protect with oil for storage. If there is any rust on the pliers head, it can be easily removed, with a slight polish. Our ESD tools comply with the following ESD standards DIN EN 61340-5-1, VDE 0300-5-1:2017-07, DIN EN 61340-2-1, VDE 0300-2-1:2016-07, DIN EN 61340-4-6, VDE 0300-4-6:2016-04. We achieve a discharge resistance of 10^6 to 10^9 ohm with the pliers handles. Attention, the use of hand tools alone is not enough to avoid electrostatic charge. For general safety, please use our wrist grounding and ESD mats, for further information see the section workplace equipment. Strong side cutters with rounded pliers head. This version is available with flush, semit flush and full flush. The pliers are suitable for cutting general resistance wire, solder wire, winding wire and heating wire (thermocouple wire). Specifically for copper wire, brass wire, steel wire, iron wire, aluminum wire, bonding wire, tin wire, nickel wire, gold wire, silver wire, platinum wire, tungsten copper wire, tungsten wire, glass fiber and kevlar. Please note the cutting capacity in the pliers handles and the care instructions for a longlife of your pliers. For special applications and individual solutions, please contact us, we are pleased to advise you. material ball bearing steel (HRC 63-65) surface without reflection matt polished dissipative between 10^6 and 10^9 ohm length 125 mm weight 80 g Flush (mini side face cut with small top)
show more
Price: EUR 56.23
HIGH TEMPERATURE GREASE HochtemperaturfettGrease, glue, oil, oiler, bottles
No. 30572-AA. Kartusche 400 g.HIGH TEMPERATURE GREASE ist das spezielle Lithium-Komplexseifenfett KP 2 P-30 mit EP-Hochdruck-Additven. Das hellbraune Hochtemperaturfett ist insbesondere fuer hochbelastete Lager bis + 150 xB0C, kurzzeitig bis 200 xB0C einsetzbar. HIGH TEMPERATURE GREASE ist das ideale Radlagerfett fuer LKW oder Schmierfett fuer Elektromotoren, Pressen, Stanzmaschinen usw.HIGH TEMPERATURE GREASE ist das spezielle Lithium-Komplexseifenfett KP 2 P-30 mit EP-Hochdruck-Additven. Das hellbraune Hochtemperaturfett ist insbesondere fuer hochbelastete Lager bis + 150 xB0C, kurzzeitig bis 200 xB0C einsetzbar. HIGH TEMPERATURE GREASE ist das ideale Radlagerfett fuer LKW oder Schmierfett fuer Elektromotoren, Pressen, Stanzmaschinen usw.HIGH TEMPERATURE GREASE ist das spezielle Lithium-Komplexseifenfett KP 2 P-30 mit EP-Hochdruck-Additven. Das hellbraune Hochtemperaturfett ist insbesondere fuer hochbelastete Lager bis + 150 xB0C, kurzzeitig bis 200 xB0C einsetzbar. HIGH TEMPERATURE GREASE ist das ideale Radlagerfett fuer LKW oder Schmierfett fuer Elektromotoren, Pressen, Stanzmaschinen usw.
show more
Price: EUR 12.57
SCHRAUBZWINGE, SPANNWEITE 800MMMisc., hammer, saws, files
No. 420-120-800.
- Profi-F-Schraubzwinge mit einem feststehenden und einem verstellbaren Spannarm, beide an einer galvanisierten Profilstahlschiene befestigt
- Verzinkte Schraube mit kunststoffummanteltem Kugel-Schwenkfuß für sicheres und einfaches Einspannen auch unregelmäßiger Werkstücke
- Widerstandsfähig und wetterfest
- Vierkant-Kunststoffgriff
show more
Price: EUR 56.11