Makes handling easier: Always the correct key when you need it.

Simplifies your work: The ball end facilitates access to screws and allows you to work at an angle of up to 25°.

Increases your efficiency: Wiha MagicRing® holding feature holds all hex screws in place without a magnet.

Lowers your costs: Highly durable thanks to high-quality, chrome-plated L-key surface to prevent corrosion.

Product dimensions: 282 x 110 x 50 mm (LxWxD)

Application: Ideal for tightening or loosening all hex screws in hard-to-reach places, removing countersunk inch screws and inserting and screwing into horizontal, inclined or deep tapped blind holes.

Quick removal: turn the L-key and pull it out

High-quality chrome-plated surface

Perfect for confined spaces thanks to ball end

Nonmagnetic holding feature

Inch design

It's a common experience. It is not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates the bother in an ingenious way. Turning one L-key in the holder makes all the other keys turn to the side at the same angle, allowing you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. Thanks to the MagicRing® holding feature (from 1/8") with its spring steel ring, the L-keys hold all hex inch screws firmly in any position perfectly without any magnets. The hexagonal ball end allows effortless screwing at an angle of up to 25°. The L-key set contains 13 hex L-keys in standard sizes and can be hung up directly at the workplace using the suspension bracket on the holder. The matt chrome-plated chrome vanadium steel guarantees robustness and a long service life.

Based on ASME B18.3.

Content:

• 1x L-keys Matt chrome-plated hexagonal ball end in inch design 0,05" x 72 mm (29471)
• 1x L-keys Matt chrome-plated hexagonal ball end in inch design 1/16" x 80 mm (29472)
• 1x L-keys Matt chrome-plated hexagonal ball end in inch design 5/64" x 88 mm (29474)
• 1x L-keys Matt chrome-plated hexagonal ball end in inch design 3/32" x 101 mm (29473)
• 1x L-keys Matt chrome-plated hexagonal ball end in inch design 7/64" x 111 mm (29475)
• 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 1/8" x 121 mm (24302)
• 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 9/64" x 136 mm (24304)
• 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 5/32" x 148 mm (24303)
• 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 3/16" x 163 mm (24305)
• 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 7/32" x 176 mm (24306)
• 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 1/4" x 191 mm (24307)
• 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 5/16" x 210 mm (24308)
• 1x L-keys Hexagonal ball end MagicRing®, inch design matt chrome-plated 3/8" x 232 mm (24341)
• 1x ErgoStar holder

Increases your flexibility: Variably adjustable right or left rotation through switching lever.

Simplifies your work: With a convenient foam insert for clearly structured storage.

Increases your efficiency: Fastening without interruption thanks to a finely toothed ratchet wrench.

Meets your requirements: Precise fitting, robust, and easy to clean.

Product dimensions: 212 x 143 x 35 mm (LxWxD)

Application: For installation and mounting work.

Tightening and loosening strongly tightened hex screws and nuts requires an enormous amount of force. With the nut driver inserts from Wiha the user can easily open any fastening. Every user is excellently equipped with the set consisting of the 13 most popular 1/4" nut driver inserts size 4-14 mm, a ratchet wrench, and two extensions. The included ratchet wrench combined with the selection of nut drivers gives users the required flexibility for their work. When working with the ratchet wrench, the user benefits from the fine toothing with 72 teeth, offering a short return angle. The right or left rotation can be variably adjusted by the integrated switching lever. The combination with the included extensions allow them to conveniently reach deep-set screws and nuts. The nut driver and extensions are mechanically locked. The change is initiated by pressing the activation button. Made of high quality chrome vanadium steel, the nut driver inserts are distinguished by their longevity and robustness, not the least thanks to their corrosion-resistant and easy to clean surface. The entire contents of the set are neatly and clearly stored in a foam insert in which markings help find the suitable nut driver.The non-slip surface finish ensures a strong grip, even in oily or wet work situations.

Based on DIN 3120 / 3122 / 3124

Content:

• 1x Ratchet wrench for nut drivers 1/4" switchable 128 mm (33301)
• 1x Nut driver insert 1/4" hexagon head 4.0 mm x 25 mm (44669)
• 1x Nut driver insert 1/4" hexagon head 4.5 mm x 25 mm (44677)
• 1x Nut driver insert 1/4" hexagon head 5.0 mm x 25 mm (44670)
• 1x Nut driver insert 1/4" hexagon head 5.5 mm x 25 mm (44671)
• 1x Nut driver insert 1/4" hexagon head 6.0 mm x 25 mm (33319)
• 1x Nut driver insert 1/4" hexagon head 7.0 mm x 25 mm (33320)
• 1x Nut driver insert 1/4" hexagon head 8.0 mm x 25 mm (33321)
• 1x Nut driver insert 1/4" hexagon head 9.0 mm x 25 mm (33322)
• 1x Nut driver insert 1/4" hexagon head 10.0 mm x 25 mm (33323)
• 1x Nut driver insert 1/4" hexagon head 11.0 mm x 25 mm (33325)
• 1x Nut driver insert 1/4" hexagon head 12.0 mm x 25 mm (33326)
• 1x Nut driver insert 1/4" hexagon head 13.0 mm x 25 mm (33327)
• 1x Nut driver insert 1/4" hexagon head 14.0 mm x 25 mm (44681)
• 1x Extension 1/4" for nut driver inserts 75 mm (33303)
• 1x Extension 1/4" for nut driver inserts 150 mm (33304)
• 1x Foam insert